Question 1

What is meant by ISO symbols?

Accepted Answer

Easily recognized symbols used throughout the world and often placed on most instrument panel warning devices and controls; developed by the International Organization for Standardization

Question 2

Information on the operation of the Toyota hybrid system is displayed on the ____________________ located in the center of the dash.

Accepted Answer

multifunction display

Question 3

Technician A says that the brake pad warning indicator light is triggered by a switch on the back of the brake pedal. Technician B says the brake pad warning indicator is triggered by a switch on the master cylinder. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B 
A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B D

Question 4

All gauges do not work. Technician A says the connection to the instrument cluster may be open. Technician B says the cluster's IVR may be open. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B 
A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B

Question 5

The stop light [brake light] checker uses a _____ to sense when a brake light bulb is burned out.

Accepted Answer

A)  thermistor 
B)  photo diode 
C)  voltage stabilizer 
D)  reed switch and magnetic coils 
A)  thermistor 
B)  photo diode 
C)  voltage stabilizer 
D)  reed switch and magnetic coils

Question 6

A(n) _____ coil is installed in the IVR power lead to prevent radio interference caused by pulsations of the IVR.

Accepted Answer

A)  choke 
B)  solenoid 
C)  ignition 
D)  damper 
A)  choke 
B)  solenoid 
C)  ignition 
D)  damper

Question 7

Which of the following is NOT displayed on the Toyota hybrid multifunction display panel?

Accepted Answer

A)  direction and path of energy flow 
B)  voltage of HV battery pack 
C)  fuel consumption [MPG] 
D)  amount of recovered energy 
A)  direction and path of energy flow 
B)  voltage of HV battery pack 
C)  fuel consumption [MPG] 
D)  amount of recovered energy

Question 8

In some fuel gauge systems, a ____________________ module is used to reduce gauge fluctuation caused by fuel sloshing in the tank.

Accepted Answer

The answer of In some fuel gauge systems, a ____________________...

Question 9

A mechanical odometer is typically driven by the speedometer drive cable and a set of gears.

Accepted Answer

A) True 
 B)False

Question 10

The vehicle speed sensor [VSS] for an electronic speedometer on an RWD vehicle is typically mounted _____.

Accepted Answer

A)  on the right front wheel hub 
B)  on the left front wheel hub 
C)  on the right rear axle hub 
D)  on the transmission output shaft 
A)  on the right front wheel hub 
B)  on the left front wheel hub 
C)  on the right rear axle hub 
D)  on the transmission output shaft

Question 11

The park distance control system warns the driver that the vehicle is close to an obstacle by _____.

Accepted Answer

A)  an audible signal that increases in frequency as the vehicle gets closer 
B)  the ABS system automatically applying the brakes when the vehicle gets too close 
C)  both "an audible signal that increases in frequency as the vehicle gets closer" and "the ABS system automatically applying the brakes when the vehicle gets too close" 
D)  neither "an audible signal that increases in frequency as the vehicle gets closer" nor "the ABS system automatically applying the brakes when the vehicle gets too close" 
A)  an audible signal that increases in frequency as the vehicle gets closer 
B)  the ABS system automatically applying the brakes when the vehicle gets too close 
C)  both "an audible signal that increases in frequency as the vehicle gets closer" and "the ABS system automatically applying the brakes when the vehicle gets too close" 
D)  neither "an audible signal that increases in frequency as the vehicle gets closer" nor "the ABS system automatically applying the brakes when the vehicle gets too close"

Question 12

The oil change maintenance reminder on a Honda is automatically reset by a switch contact in the oil filter housing that is tripped whenever the oil filter is removed.

Accepted Answer

A) True 
 B)False

Question 13

Tire pressure monitor systems are being discussed. Technician A says that when the indicator light is yellow, the pressure in one of the vehicle's tires is below minimum. Technician B says that when the indicator is red, the tire pressure is excessively low or almost flat. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B 
A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B

Question 14

The correct term for a modern dashboard is ____________________.

Accepted Answer

The answer of The correct term for a modern dashboard...

Question 15

The typical magnetic gauges receive _____ volts from the IVR.

Accepted Answer

A)  2.0 
B)  5.0 
C)  8.0 
D)  12.0 
A)  2.0 
B)  5.0 
C)  8.0 
D)  12.0

Question 16

What basic devices should be checked while diagnosing gauge/indicator failures?

Accepted Answer

Check fuses, indicat

Question 17

How does an HUD display work?

Accepted Answer

The HUD systems project visual images on

Question 18

Fuel range, ETA [estimated time of arrival], fuel economy and distance to destination are common types of data that are displayed on the _____.

Accepted Answer

A)  BCM [body control module] 
B)  driver information center 
C)  heads-up display 
D)  all answers are correct 
A)  BCM [body control module] 
B)  driver information center 
C)  heads-up display 
D)  all answers are correct

Question 19

A universal gauge checker can be used to check the operation of the ______.

Accepted Answer

A)  gauge unit 
B)  instrument voltage regulator 
C)  both "gauge unit" and "instrument voltage regulator" 
D)  neither "gauge unit" nor "instrument voltage regulator" 
A)  gauge unit 
B)  instrument voltage regulator 
C)  both "gauge unit" and "instrument voltage regulator" 
D)  neither "gauge unit" nor "instrument voltage regulator"

Question 20

Technician A says an oil pressure sending unit may be tested with an ohmmeter. Technician B says an engine coolant temperature sending unit may be tested with an ohmmeter. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B 
A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B

Exam 21: Instrumentation and Information Displays

What is meant by ISO symbols?

Information on the operation of the Toyota hybrid system is displayed on the ____________________ located in the center of the dash.

Technician A says that the brake pad warning indicator light is triggered by a switch on the back of the brake pedal. Technician B says the brake pad warning indicator is triggered by a switch on the master cylinder. Who is correct?

All gauges do not work. Technician A says the connection to the instrument cluster may be open. Technician B says the cluster's IVR may be open. Who is correct?

The stop light [brake light] checker uses a _____ to sense when a brake light bulb is burned out.

A(n) _____ coil is installed in the IVR power lead to prevent radio interference caused by pulsations of the IVR.

Which of the following is NOT displayed on the Toyota hybrid multifunction display panel?

In some fuel gauge systems, a ____________________ module is used to reduce gauge fluctuation caused by fuel sloshing in the tank.

A mechanical odometer is typically driven by the speedometer drive cable and a set of gears.

The vehicle speed sensor [VSS] for an electronic speedometer on an RWD vehicle is typically mounted _____.

The park distance control system warns the driver that the vehicle is close to an obstacle by _____.

The oil change maintenance reminder on a Honda is automatically reset by a switch contact in the oil filter housing that is tripped whenever the oil filter is removed.

Tire pressure monitor systems are being discussed. Technician A says that when the indicator light is yellow, the pressure in one of the vehicle's tires is below minimum. Technician B says that when the indicator is red, the tire pressure is excessively low or almost flat. Who is correct?

The correct term for a modern dashboard is ____________________.

The typical magnetic gauges receive _____ volts from the IVR.

What basic devices should be checked while diagnosing gauge/indicator failures?

How does an HUD display work?

Fuel range, ETA [estimated time of arrival], fuel economy and distance to destination are common types of data that are displayed on the _____.

A universal gauge checker can be used to check the operation of the ______.

Technician A says an oil pressure sending unit may be tested with an ohmmeter. Technician B says an engine coolant temperature sending unit may be tested with an ohmmeter. Who is correct?

Careers in the Automotive Industry

Workplace Skills

Basic Theories and Math

Automotive Systems

Hand Tools and Shop Equipment

Diagnostic Equipment and Special Tools

Working Safely in the Shop

Preventive Maintenance and Basic Services

Automotive Engine Designs and Diagnosis

Engine Disassembly and Cleaning

Lower End Theory and Service

Upper End Theory and Service

Engine Sealing and Reassembly

Lubricating and Cooling Systems

Basics of Electrical Systems

General Electrical System Diagnostics and Service

Batteries: Theory, Diagnosis, and Service

Starting and Motor Systems

Charging Systems

Lighting Systems

Basics of Electronics and Computer Systems

Electrical Accessories

Engine Performance Systems

Detailed Diagnosis and Sensors

Ignition Systems

Ignition System Diagnosis and Service

Gasoline, Diesel, and Other Fuels

Fuel Delivery Systems

Electronic Fuel Injection

Fuel Injection System Diagnosis and Service

Intake and Exhaust Systems

Emission Control Systems

Emission Control Diagnosis and Service

Hybrid Vehicles

Electric Vehicles

Clutches

Manual Transmissions and Transaxles

Manual Transmissiontransaxle Service

Drive Axles and Differentials

Automatic Transmissions and Transaxles

Electronic Automatic Transmissions

Automatic Transmission and Transaxle Service

Four- and All- Wheel Drive

Tires and Wheels

Suspension Systems

Steering Systems

Restraint Systems: Theory, Diagnosis, and Service

Wheel Alignment

Brake Systems

Drum Brakes

Disc Brakes

Antilock Brake, Traction Control, and Stability Control Systems

Heating and Air Conditioning

Air-Conditioning Diagnosis and Service

Filters