Question 1

How does master/slave communication work?

Accepted Answer

In master/slave communication,the controller,the master,asks for data from nodes,the slaves,and they only respond when directed.This method ensures clean communication and allows for precise timing of messages.

Question 2

How does Peer-to-Peer communication work?

Accepted Answer

Peer-to-Peer (P2P) communication is where each node can talk directly to one another without having to go through a third node,such as the main controller,and act as sender or receiver of data.

Question 3

We refer to induced voltage from magnetic fields or radio waves as ___________.

Accepted Answer

A)  half duplex 
B)  simplex 
C)  shielding 
D)  noise 
A)  half duplex 
B)  simplex 
C)  shielding 
D)  noise D

Question 4

Which topology uses a central connection which has connections leading to each separate device on the network?

Accepted Answer

A)  Tree 
B)  Star 
C)  Bus 
D)  Mesh 
A)  Tree 
B)  Star 
C)  Bus 
D)  Mesh

Question 5

___________ uses the multi-drop type of network with multiple devices,with their own GSD file,on a single cable.

Accepted Answer

A)  ControlNet 
B)  Ethernet/IP 
C)  Profibus 
D)  DeviceNet 
A)  ControlNet 
B)  Ethernet/IP 
C)  Profibus 
D)  DeviceNet

Question 6

Which of the following is not a part of the Profibus protocol family?

Accepted Answer

A)  Profibus Decentralized Periphery 
B)  Profibus PA 
C)  Profibus FMS 
D)  None of these are correct 
A)  Profibus Decentralized Periphery 
B)  Profibus PA 
C)  Profibus FMS 
D)  None of these are correct

Question 7

What are the five main things to keep in mind when working to integrate systems?

Accepted Answer

- The process involved 
- the

Question 8

Which topology has multiple connections where each node is connected to all or several nodes?

Accepted Answer

A)  Mesh 
B)  Ring 
C)  Star 
D)  Bus 
A)  Mesh 
B)  Ring 
C)  Star 
D)  Bus

Question 9

Which topology has one main cable,called a trunk cable,with terminating resistors at each end?

Accepted Answer

A)  Star 
B)  Bus 
C)  Mesh 
D)  Tree 
A)  Star 
B)  Bus 
C)  Mesh 
D)  Tree

Question 10

___________ is a deterministic protocol where we can set the minimum rate of data transfer within given parameters.

Accepted Answer

A)  Fieldbus 
B)  ControlNet 
C)  DeviceNet 
D)  Ethernet/IP 
A)  Fieldbus 
B)  ControlNet 
C)  DeviceNet 
D)  Ethernet/IP

Question 11

How does producer/consumer communication work?

Accepted Answer

Producer/consumer communication method i

Question 12

Which topology has all the nodes connected in series to form a continuous loop?

Accepted Answer

A)  Ring 
B)  Mesh 
C)  Bus 
D)  Star 
A)  Ring 
B)  Mesh 
C)  Bus 
D)  Star

Question 13

___________ is a generic term for a number of industrial network protocols designed to provide real-time control of devices.

Accepted Answer

A)  Ethernet/IP 
B)  Fieldbus 
C)  DeviceNet 
D)  ControlNet 
A)  Ethernet/IP 
B)  Fieldbus 
C)  DeviceNet 
D)  ControlNet

Question 14

Which of the following was designed specifically for the process industry?

Accepted Answer

A)  Profibus FMS 
B)  Profibus DP 
C)  Profibus PA 
D)  ProfiNet 
A)  Profibus FMS 
B)  Profibus DP 
C)  Profibus PA 
D)  ProfiNet

Question 15

Which of the following is used for communicating at the cell level with devices such as PLCs and industrial-grade PCs?

Accepted Answer

A)  Profibus FMS 
B)  Profibus DP 
C)  Profibus PA 
D)  ProfiNet 
A)  Profibus FMS 
B)  Profibus DP 
C)  Profibus PA 
D)  ProfiNet

Question 16

How does polling data transfer work?

Accepted Answer

Polling controls communication via the m

Question 17

Networks are used to _________________.

Accepted Answer

A)  transmit data 
B)  allow for facility remote maintenance 
C)  share resources 
D)  All of these are correct 
A)  transmit data 
B)  allow for facility remote maintenance 
C)  share resources 
D)  All of these are correct

How does master/slave communication work?

How does Peer-to-Peer communication work?

We refer to induced voltage from magnetic fields or radio waves as ___________.

Which topology uses a central connection which has connections leading to each separate device on the network?

___________ uses the multi-drop type of network with multiple devices,with their own GSD file,on a single cable.

Which of the following is not a part of the Profibus protocol family?

What are the five main things to keep in mind when working to integrate systems?

Which topology has multiple connections where each node is connected to all or several nodes?

Which topology has one main cable,called a trunk cable,with terminating resistors at each end?

___________ is a deterministic protocol where we can set the minimum rate of data transfer within given parameters.

How does producer/consumer communication work?

Which topology has all the nodes connected in series to form a continuous loop?

___________ is a generic term for a number of industrial network protocols designed to provide real-time control of devices.

Which of the following was designed specifically for the process industry?

Which of the following is used for communicating at the cell level with devices such as PLCs and industrial-grade PCs?

How does polling data transfer work?

Networks are used to _________________.

Safety

Introduction to Industrial Robotics

Components of the Robot

Classification of Robots

End-Of-Arm Tooling

Programming and File Management

Automation Sensors

Vision Systems

Programmable Logic Controllers Plcs and Human-Machine Interfaces Hmis

Maintenance and Troubleshooting

Justifying the Use of a Robot

Filters

Exam 9: Integration and Networking

How does master/slave communication work?

How does Peer-to-Peer communication work?

We refer to induced voltage from magnetic fields or radio waves as ___________.

Which topology uses a central connection which has connections leading to each separate device on the network?

___________ uses the multi-drop type of network with multiple devices,with their own GSD file,on a single cable.

Which of the following is not a part of the Profibus protocol family?

What are the five main things to keep in mind when working to integrate systems?

Which topology has multiple connections where each node is connected to all or several nodes?

Which topology has one main cable,called a trunk cable,with terminating resistors at each end?

___________ is a deterministic protocol where we can set the minimum rate of data transfer within given parameters.

How does producer/consumer communication work?

Which topology has all the nodes connected in series to form a continuous loop?

___________ is a generic term for a number of industrial network protocols designed to provide real-time control of devices.

Which of the following was designed specifically for the process industry?

Which of the following is used for communicating at the cell level with devices such as PLCs and industrial-grade PCs?

How does polling data transfer work?

Networks are used to _________________.

Safety

Introduction to Industrial Robotics

Components of the Robot

Classification of Robots

End-Of-Arm Tooling

Programming and File Management

Automation Sensors

Vision Systems

Programmable Logic Controllers Plcs and Human-Machine Interfaces Hmis

Maintenance and Troubleshooting

Justifying the Use of a Robot

Filters