Question 1

RC integrators can be used to convert a repetitive pulse waveform to a constant dc voltage equal to the average voltage of the waveform if:

Accepted Answer

A) l is equal to tW. 
B) l is five times tW. 
C) l is very small compared to tW. 
D) l is very large compared to tW. 
A) l is equal to tW. 
B) l is five times tW. 
C) l is very small compared to tW. 
D) l is very large compared to tW.

Question 2

What is output voltage at the end of the input pulse to an RL integrator if the resistance is 22 kΩ, the inductor is 2 H and the input is a 12 V, 0.0909 ms pulse?

Accepted Answer

A) 11.4 V 
B) 11.8 V 
C) 10.4 V 
D) 7.59 V 
A) 11.4 V 
B) 11.8 V 
C) 10.4 V 
D) 7.59 V

Question 3

The output from an RC integrator resembles the input if .

Accepted Answer

A) l is equal to the pulse width 
B) l is much larger that the pulse width 
C) l is less than the pulse width 
D) l is much less than the pulse width 
A) l is equal to the pulse width 
B) l is much larger that the pulse width 
C) l is less than the pulse width 
D) l is much less than the pulse width

Question 4

What is the output voltage at the end of the input pulse to an RL integrator if the resistance is 1.2 k Ω, the inductor is 200 mH and the input is a 5 V, 1.2 ms pulse?

Accepted Answer

A) 4.75 V 
B) 5 V 
C) 3.16 V 
D) 4.532 V 
A) 4.75 V 
B) 5 V 
C) 3.16 V 
D) 4.532 V

Question 5

What is VC at the end of the input pulse to an RC integrator if the resistance is 5 kΩ, the capacitance is 47 µF and the input is a 15 V, 470 ms pulse?

Accepted Answer

A) 13 V 
B) 14.3 V 
C) 9.48 V 
D) 14.7 V 
A) 13 V 
B) 14.3 V 
C) 9.48 V 
D) 14.7 V

Question 6

What is VC at the end of the input pulse to an RC integrator if the resistance is 22 kΩ, the capacitance is 0.05 µF and the input is a 12 V, 2.2 ms pulse?

Accepted Answer

A) 7.58 V 
B) 4.42 V 
C) 12 V 
D) 10.4 V 
A) 7.58 V 
B) 4.42 V 
C) 12 V 
D) 10.4 V

Question 7

How does the RC differentiator output look when 5l is much less than the pulse width?

Accepted Answer

A) positive spikes 
B) square waves 
C) negative spikes 
D) positive and negative spikes 
A) positive spikes 
B) square waves 
C) negative spikes 
D) positive and negative spikes

Question 8

A watchdog circuit is used to monitor for a particular condition in a circuit so that corrective action can be taken.

Accepted Answer

A) True 
 B)False

RC integrators can be used to convert a repetitive pulse waveform to a constant dc voltage equal to the average voltage of the waveform if:

What is output voltage at the end of the input pulse to an RL integrator if the resistance is 22 kΩ, the inductor is 2 H and the input is a 12 V, 0.0909 ms pulse?

The output from an RC integrator resembles the input if .

What is the output voltage at the end of the input pulse to an RL integrator if the resistance is 1.2 k Ω, the inductor is 200 mH and the input is a 5 V, 1.2 ms pulse?

What is VC at the end of the input pulse to an RC integrator if the resistance is 5 kΩ, the capacitance is 47 µF and the input is a 15 V, 470 ms pulse?

What is VC at the end of the input pulse to an RC integrator if the resistance is 22 kΩ, the capacitance is 0.05 µF and the input is a 12 V, 2.2 ms pulse?

How does the RC differentiator output look when 5l is much less than the pulse width?

A watchdog circuit is used to monitor for a particular condition in a circuit so that corrective action can be taken.

Systems, Quantities, and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Parallel Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rccircuits

Inductors

Rlcircuits

Rlccircuits and Resonance

Transformers

Filters

Exam 15: Time Response of Reactive Circuits

RC integrators can be used to convert a repetitive pulse waveform to a constant dc voltage equal to the average voltage of the waveform if:

What is output voltage at the end of the input pulse to an RL integrator if the resistance is 22 kΩ, the inductor is 2 H and the input is a 12 V, 0.0909 ms pulse?

The output from an RC integrator resembles the input if .

What is the output voltage at the end of the input pulse to an RL integrator if the resistance is 1.2 k Ω, the inductor is 200 mH and the input is a 5 V, 1.2 ms pulse?

What is VC at the end of the input pulse to an RC integrator if the resistance is 5 kΩ, the capacitance is 47 µF and the input is a 15 V, 470 ms pulse?

What is VC at the end of the input pulse to an RC integrator if the resistance is 22 kΩ, the capacitance is 0.05 µF and the input is a 12 V, 2.2 ms pulse?

How does the RC differentiator output look when 5l is much less than the pulse width?

A watchdog circuit is used to monitor for a particular condition in a circuit so that corrective action can be taken.

Systems, Quantities, and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Parallel Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rccircuits

Inductors

Rlcircuits

Rlccircuits and Resonance

Transformers

Filters