IT equals 0.1 mA in a 3-branch parallel circuit. If I1=0.022 mA and I2=0.007 mA, I3=?

A) 0.029 mA B) 0.071 mA C) 0.213 mA D) 0.142 mA A) 0.029 mA B) 0.071 mA C) 0.213 mA D) 0.142 mA

A two-branch parallel circuit contains these values: R1=1200$\Omega$ , IT=0.005 mA, I2=0.003 mA . What is the value of VR1 ?

A) 2.4 m V B) 3.6 m V C) 6 mV D) 18 mV A) 2.4 m V B) 3.6 m V C) 6 mV D) 18 mV

Exam 5: Parallel Circuits

If a 500 $If a 500 , 1200 \Omega and 10 \mathrm { k } \Omega resistor are connected in parallel across a 25 V source, how much current flows through the 1200 \Omega resistor?$ , 1200 $\Omega$ and 10 $\mathrm { k } \Omega$ resistor are connected in parallel across a 25 V source, how much current flows through the 1200 $\Omega$ resistor?

Free

(Multiple Choice)

4.9/5

(34)

Question 1

Correct Answer:

Verified

The power dissipated by any branch of a parallel circuit_____

Free

(Multiple Choice)

4.9/5

(44)

Question 2

Correct Answer:

Verified

$\text { Figure } 5 < 1 -Refer to Figure 5-1. The total current for this circuit is measured and the ammeter reads 57.8 mA . What is the problem, if any?$ $\text { Figure } 5 < 1$ -Refer to Figure 5-1. The total current for this circuit is measured and the ammeter reads 57.8 mA . What is the problem, if any?

Free

(Multiple Choice)

4.9/5

(35)

Question 3

Correct Answer:

Verified

If one resistor opens in a parallel circuit, the total current________

(Multiple Choice)

4.8/5

(27)

Question 4

If you measure a lower than normal total current in a parallel circuit, ________.

(Multiple Choice)

4.9/5

(32)

Question 5

IT equals 0.1 mA in a 3-branch parallel circuit. If I₁=0.022 mA and I₂=0.007 mA, I₃=?

(Multiple Choice)

5.0/5

(34)

Question 6

If you Want to measure a load voltage With a DVM, connect the meter ________.

(Multiple Choice)

4.9/5

(27)

Question 7

If three equal resistors are connected in parallel across 12 V, each resistor drops 4 V.

(True/False)

4.9/5

(30)

Question 8

$\text { Figure } 5 < 1 -Refer to Figure 5-1. The fuse in this circuit is rated at 100 mA . Would the fuse blow if an additional 1 \mathrm { k } \Omega were placed in parallel with R5?$ $\text { Figure } 5 < 1$ -Refer to Figure 5-1. The fuse in this circuit is rated at 100 mA . Would the fuse blow if an additional 1 $\mathrm { k } \Omega$ were placed in parallel with R5?

(Multiple Choice)

4.7/5

(42)

Question 9

In a parallel circuit, total power PT is calculated as:

(Multiple Choice)

4.7/5

(37)

Question 10

$\text { Figure } 5 < 1 -Refer to Figure 5-1. What is the power dissipation of R3?$ $\text { Figure } 5 < 1$ -Refer to Figure 5-1. What is the power dissipation of R3?

(Multiple Choice)

4.8/5

(31)

Question 11

A two-branch parallel circuit contains these values: R₁=1200 $\Omega$ , I_T=0.005 mA, I₂=0.003 mA . What is the value of V_R1 ?

(Multiple Choice)

4.9/5

(32)

Question 12

As additional branch resistors are connected in a parallel circuit,_________

(Multiple Choice)

4.9/5

(34)

Question 13

Kirchhoffʹs Current Law states that the sum of the currents into a junction must equal the sum of the currents out of that junction.

(True/False)

4.8/5

(36)

Question 14

If three 22 $\mathrm { k } \Omega$ resistors are connected in parallel across a 10 V source, P_T equals________

(Multiple Choice)

4.9/5

(31)

Question 15

An open in one branch of a parallel circuit results in:

(Multiple Choice)

4.8/5

(30)

Question 16

A formula that applies to a two-branch parallel circuit is_______

(Multiple Choice)

4.7/5

(26)

Question 17

If a 1 $\mathrm { M } \Omega$ resistor, 0.47 $\mathrm { M } \Omega$ resistor and 0.5 $\mathrm { M } \Omega$ resistor are connected in parallel across an 18 V source, what is the total current if the 1 $\mathrm { M } \Omega$ resistor opens?

(Multiple Choice)

4.9/5

(31)

Question 18

If a 4.7 $\mathrm { k } \Omega$ resistor and 2.2 $\mathrm { k } \Omega$ resistor are connected in parallel, the total resistance is____

(Multiple Choice)

4.8/5

(27)

Question 19

As resistors are disconnected from a parallel circuit,______

(Multiple Choice)

4.9/5

(42)

Question 20

Showing 1 - 20 of 62

The power dissipated by any branch of a parallel circuit_____

If one resistor opens in a parallel circuit, the total current________

If you measure a lower than normal total current in a parallel circuit, ________.

IT equals 0.1 mA in a 3-branch parallel circuit. If I₁=0.022 mA and I₂=0.007 mA, I₃=?

If you Want to measure a load voltage With a DVM, connect the meter ________.

If three equal resistors are connected in parallel across 12 V, each resistor drops 4 V.

In a parallel circuit, total power PT is calculated as:

$\text { Figure } 5 < 1 -Refer to Figure 5-1. What is the power dissipation of R3?$ $\text { Figure } 5 < 1$ -Refer to Figure 5-1. What is the power dissipation of R3?

A two-branch parallel circuit contains these values: R₁=1200 $\Omega$ , I_T=0.005 mA, I₂=0.003 mA . What is the value of V_R1 ?

As additional branch resistors are connected in a parallel circuit,_________

Kirchhoffʹs Current Law states that the sum of the currents into a junction must equal the sum of the currents out of that junction.

If three 22 $\mathrm { k } \Omega$ resistors are connected in parallel across a 10 V source, P_T equals________

An open in one branch of a parallel circuit results in:

A formula that applies to a two-branch parallel circuit is_______

If a 1 $\mathrm { M } \Omega$ resistor, 0.47 $\mathrm { M } \Omega$ resistor and 0.5 $\mathrm { M } \Omega$ resistor are connected in parallel across an 18 V source, what is the total current if the 1 $\mathrm { M } \Omega$ resistor opens?

If a 4.7 $\mathrm { k } \Omega$ resistor and 2.2 $\mathrm { k } \Omega$ resistor are connected in parallel, the total resistance is____

As resistors are disconnected from a parallel circuit,______

Quantities and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rc Circuits

Inductors

Rl Circuits

Rlc Circuits and Resonance

Time Response of Reactive Circuits

Transformers

Regulators, Filters, and Op-Amps

Understanding Transducers, Sensors, and Conversion in Industrial Processes

Filters

Exam 5: Parallel Circuits

If a 500, 1200 Ω\OmegaΩ and 10 kΩ\mathrm { k } \OmegakΩ resistor are connected in parallel across a 25 V source, how much current flows through the 1200 Ω\OmegaΩ resistor?

The power dissipated by any branch of a parallel circuit_____

Figure 5<1\text { Figure } 5 < 1 Figure 5<1 -Refer to Figure 5-1. The total current for this circuit is measured and the ammeter reads 57.8 mA . What is the problem, if any?

If one resistor opens in a parallel circuit, the total current________

If you measure a lower than normal total current in a parallel circuit, ________.

IT equals 0.1 mA in a 3-branch parallel circuit. If I1=0.022 mA and I2=0.007 mA, I3=?

If you Want to measure a load voltage With a DVM, connect the meter ________.

If three equal resistors are connected in parallel across 12 V, each resistor drops 4 V.

Figure 5<1\text { Figure } 5 < 1 Figure 5<1 -Refer to Figure 5-1. The fuse in this circuit is rated at 100 mA . Would the fuse blow if an additional 1 kΩ\mathrm { k } \OmegakΩ were placed in parallel with R5?

In a parallel circuit, total power PT is calculated as:

Figure 5<1\text { Figure } 5 < 1 Figure 5<1 -Refer to Figure 5-1. What is the power dissipation of R3?

A two-branch parallel circuit contains these values: R1=1200 Ω\OmegaΩ , IT=0.005 mA, I2=0.003 mA . What is the value of VR1 ?

As additional branch resistors are connected in a parallel circuit,_________

Kirchhoffʹs Current Law states that the sum of the currents into a junction must equal the sum of the currents out of that junction.

If three 22 kΩ\mathrm { k } \OmegakΩ resistors are connected in parallel across a 10 V source, PT equals________

An open in one branch of a parallel circuit results in:

A formula that applies to a two-branch parallel circuit is_______

If a 1 MΩ\mathrm { M } \OmegaMΩ resistor, 0.47 MΩ\mathrm { M } \OmegaMΩ resistor and 0.5 MΩ\mathrm { M } \OmegaMΩ resistor are connected in parallel across an 18 V source, what is the total current if the 1 MΩ\mathrm { M } \OmegaMΩ resistor opens?

If a 4.7 kΩ\mathrm { k } \OmegakΩ resistor and 2.2 kΩ\mathrm { k } \OmegakΩ resistor are connected in parallel, the total resistance is____

As resistors are disconnected from a parallel circuit,______

Quantities and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rc Circuits

Inductors

Rl Circuits

Rlc Circuits and Resonance

Time Response of Reactive Circuits

Transformers

Regulators, Filters, and Op-Amps

Understanding Transducers, Sensors, and Conversion in Industrial Processes

Filters

IT equals 0.1 mA in a 3-branch parallel circuit. If I₁=0.022 mA and I₂=0.007 mA, I₃=?

$\text { Figure } 5 < 1 -Refer to Figure 5-1. What is the power dissipation of R3?$ $\text { Figure } 5 < 1$ -Refer to Figure 5-1. What is the power dissipation of R3?

A two-branch parallel circuit contains these values: R₁=1200 $\Omega$ , I_T=0.005 mA, I₂=0.003 mA . What is the value of V_R1 ?

If three 22 $\mathrm { k } \Omega$ resistors are connected in parallel across a 10 V source, P_T equals________

If a 1 $\mathrm { M } \Omega$ resistor, 0.47 $\mathrm { M } \Omega$ resistor and 0.5 $\mathrm { M } \Omega$ resistor are connected in parallel across an 18 V source, what is the total current if the 1 $\mathrm { M } \Omega$ resistor opens?

If a 4.7 $\mathrm { k } \Omega$ resistor and 2.2 $\mathrm { k } \Omega$ resistor are connected in parallel, the total resistance is____