Question 1

The type of line that consist of an inclined line with an arrow at the end is:

Accepted Answer

A) Visible line 
B) Dimension line 
C) Leader line 
D) Extension line 
A) Visible line 
B) Dimension line 
C) Leader line 
D) Extension line C

Question 2

The type of line that might be used to show mechanisms in alternative positions is:

Accepted Answer

A) Symmetry line 
B) Break line 
C) Phantom line 
D) Section line 
A) Symmetry line 
B) Break line 
C) Phantom line 
D) Section line C

Question 3

A hidden line is the same as a phantom line.

Accepted Answer

A) True 
 B)False  False

Question 4

Thin, solid lines with arrowheads at each end, that are used to show the distance being measured are:

Accepted Answer

A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines 
A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines

Question 5

The type of line that is used to show that a view of a part has been shortened is:

Accepted Answer

A) Visible line 
B) Break line 
C) Leader line 
D) Extension line 
A) Visible line 
B) Break line 
C) Leader line 
D) Extension line

Question 6

Alternate long and short dashes are used for:

Accepted Answer

A) Visible lines 
B) Dimension lines 
C) Centerlines 
D) Extension lines 
A) Visible lines 
B) Dimension lines 
C) Centerlines 
D) Extension lines

Question 7

The symbol Ø in front of a dimension indicates a diameter.

Accepted Answer

A) True 
 B)False

Question 8

The type of line that consists of a centerline having two dark, parallel lines, drawn at right angles to each end is:

Accepted Answer

A) Symmetry line 
B) Dimension line 
C) Cutting plane line 
D) Chain line 
A) Symmetry line 
B) Dimension line 
C) Cutting plane line 
D) Chain line

Question 9

The outline, or edges of a part are shown by:

Accepted Answer

A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines 
A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines

Question 10

Dimensions are usually placed between:

Accepted Answer

A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines 
A) Visible lines 
B) Dimension lines 
C) Leader lines 
D) Extension lines

The type of line that consist of an inclined line with an arrow at the end is:

The type of line that might be used to show mechanisms in alternative positions is:

A hidden line is the same as a phantom line.

Thin, solid lines with arrowheads at each end, that are used to show the distance being measured are:

The type of line that is used to show that a view of a part has been shortened is:

Alternate long and short dashes are used for:

The symbol Ø in front of a dimension indicates a diameter.

The type of line that consists of a centerline having two dark, parallel lines, drawn at right angles to each end is:

The outline, or edges of a part are shown by:

Dimensions are usually placed between:

Industrial Drawings

Title Blocks

Pictorial Sketching

Orthographic Projection

Three-View Drawings

Two-View Drawings

One-View Drawings

Auxiliary Views

Section Views

Dimensions and Tolerances

Decimal Dimensions and Tolerances

Dimensioning Holes, Keyways, and Keyseats

Dimensioning Arcs and Radii

Hole Patterns and Revision Blocks

Angles, Dovetails, and Slots

Metric Dimensions and Tolerances

Machining Symbols, Bosses, and Pads

Surface Texture

Tapers and Chamfers

Undercuts and Knurling

Screw Thread Specifications

Screw Thread Representation and Threaded Fasteners

Pipe Threads

Assembly Drawings

Welding Symbols

Geometric Tolerances - Datums

Geometric Tolerances - Location and Form

Filters

Exam 3: Lines and Symbols

The type of line that consist of an inclined line with an arrow at the end is:

The type of line that might be used to show mechanisms in alternative positions is:

A hidden line is the same as a phantom line.

Thin, solid lines with arrowheads at each end, that are used to show the distance being measured are:

The type of line that is used to show that a view of a part has been shortened is:

Alternate long and short dashes are used for:

The symbol Ø in front of a dimension indicates a diameter.

The type of line that consists of a centerline having two dark, parallel lines, drawn at right angles to each end is:

The outline, or edges of a part are shown by:

Dimensions are usually placed between:

Industrial Drawings

Title Blocks

Pictorial Sketching

Orthographic Projection

Three-View Drawings

Two-View Drawings

One-View Drawings

Auxiliary Views

Section Views

Dimensions and Tolerances

Decimal Dimensions and Tolerances

Dimensioning Holes, Keyways, and Keyseats

Dimensioning Arcs and Radii

Hole Patterns and Revision Blocks

Angles, Dovetails, and Slots

Metric Dimensions and Tolerances

Machining Symbols, Bosses, and Pads

Surface Texture

Tapers and Chamfers

Undercuts and Knurling

Screw Thread Specifications

Screw Thread Representation and Threaded Fasteners

Pipe Threads

Assembly Drawings

Welding Symbols

Geometric Tolerances - Datums

Geometric Tolerances - Location and Form

Filters