Question 1

Coordinate dimensions are used for bolt hole circles that will be produced on machines equipped with digital readouts.

Accepted Answer

A) True 
 B)False  False

Question 2

A circle contains:

Accepted Answer

A) 360 degrees 
B) 90 degrees 
C) 180 degrees 
D) 270 degrees 
A) 360 degrees 
B) 90 degrees 
C) 180 degrees 
D) 270 degrees A

Question 3

If a drawing dimension is changed, but the print is not redrawn:

Accepted Answer

A) No special notation is required 
B) A "Not to Scale" symbol should be shown for those dimensions that require them 
C) Users will be confused, so this should never happen 
A) No special notation is required 
B) A "Not to Scale" symbol should be shown for those dimensions that require them 
C) Users will be confused, so this should never happen B

Question 4

A bolt circle is usually dimensioned by specifying the diameter of the circle.

Accepted Answer

A) True 
 B)False

Question 5

Holes located on a bolt hole circle may be equally spaced from each other or unequally spaced

Accepted Answer

A) True 
 B)False

Question 6

A revision block should include:

Accepted Answer

A) A description of the change that was made 
B) A revision number or letter 
C) The date of the change 
D) The name or initials of the person making the change 
E) All of the above 
A) A description of the change that was made 
B) A revision number or letter 
C) The date of the change 
D) The name or initials of the person making the change 
E) All of the above

Question 7

If four holes are equally spaced on a bolt circle, but two holes are different sizes than the other two:

Accepted Answer

A) They are dimensioned the same as a pattern that included holes that are of the same size 
B) Additional dimensions and leader lines are required 
C) This is not a good practice, and should not be specified 
A) They are dimensioned the same as a pattern that included holes that are of the same size 
B) Additional dimensions and leader lines are required 
C) This is not a good practice, and should not be specified

Question 8

In a bolt hole circle consisting of five equally spaced holes, the holes will be:

Accepted Answer

A) 72 degrees apart 
B) 90 degrees apart 
C) 36 degrees apart 
D) 60 degrees apart 
A) 72 degrees apart 
B) 90 degrees apart 
C) 36 degrees apart 
D) 60 degrees apart

Question 9

For a bolt hole circle that is dimensioned using coordinate dimensions, the bolt circle diameter is dimensioned just the same as for bolt circles that do not show coordinate dimensions.

Accepted Answer

A) True 
 B)False

Question 10

The place on a print where a revision was made may be indicated by a letter or number enclosed in a circle or triangle.

Accepted Answer

A) True 
 B)False

Question 11

Equal-sized holes that are unequally spaced on a bolt circle require:

Accepted Answer

A) A hole size dimension shown for each hole 
B) An angular dimension, even for those shown to be vertically or horizontally in line with the center of the bolt hole circle 
C) Angular dimensions for each hole that is not shown to be vertically or horizontally in line with the center of the bolt hole circle 
D) Dimensioning that is no different than that for equally spaced hole 
A) A hole size dimension shown for each hole 
B) An angular dimension, even for those shown to be vertically or horizontally in line with the center of the bolt hole circle 
C) Angular dimensions for each hole that is not shown to be vertically or horizontally in line with the center of the bolt hole circle 
D) Dimensioning that is no different than that for equally spaced hole

Coordinate dimensions are used for bolt hole circles that will be produced on machines equipped with digital readouts.

A circle contains:

If a drawing dimension is changed, but the print is not redrawn:

A bolt circle is usually dimensioned by specifying the diameter of the circle.

Holes located on a bolt hole circle may be equally spaced from each other or unequally spaced

A revision block should include:

If four holes are equally spaced on a bolt circle, but two holes are different sizes than the other two:

In a bolt hole circle consisting of five equally spaced holes, the holes will be:

For a bolt hole circle that is dimensioned using coordinate dimensions, the bolt circle diameter is dimensioned just the same as for bolt circles that do not show coordinate dimensions.

The place on a print where a revision was made may be indicated by a letter or number enclosed in a circle or triangle.

Equal-sized holes that are unequally spaced on a bolt circle require:

Industrial Drawings

Title Blocks

Lines and Symbols

Pictorial Sketching

Orthographic Projection

Three-View Drawings

Two-View Drawings

One-View Drawings

Auxiliary Views

Section Views

Dimensions and Tolerances

Decimal Dimensions and Tolerances

Dimensioning Holes, Keyways, and Keyseats

Dimensioning Arcs and Radii

Angles, Dovetails, and Slots

Metric Dimensions and Tolerances

Machining Symbols, Bosses, and Pads

Surface Texture

Tapers and Chamfers

Undercuts and Knurling

Screw Thread Specifications

Screw Thread Representation and Threaded Fasteners

Pipe Threads

Assembly Drawings

Welding Symbols

Geometric Tolerances - Datums

Geometric Tolerances - Location and Form

Filters

Exam 15: Hole Patterns and Revision Blocks

Coordinate dimensions are used for bolt hole circles that will be produced on machines equipped with digital readouts.

A circle contains:

If a drawing dimension is changed, but the print is not redrawn:

A bolt circle is usually dimensioned by specifying the diameter of the circle.

Holes located on a bolt hole circle may be equally spaced from each other or unequally spaced

A revision block should include:

If four holes are equally spaced on a bolt circle, but two holes are different sizes than the other two:

In a bolt hole circle consisting of five equally spaced holes, the holes will be:

For a bolt hole circle that is dimensioned using coordinate dimensions, the bolt circle diameter is dimensioned just the same as for bolt circles that do not show coordinate dimensions.

The place on a print where a revision was made may be indicated by a letter or number enclosed in a circle or triangle.

Equal-sized holes that are unequally spaced on a bolt circle require:

Industrial Drawings

Title Blocks

Lines and Symbols

Pictorial Sketching

Orthographic Projection

Three-View Drawings

Two-View Drawings

One-View Drawings

Auxiliary Views

Section Views

Dimensions and Tolerances

Decimal Dimensions and Tolerances

Dimensioning Holes, Keyways, and Keyseats

Dimensioning Arcs and Radii

Angles, Dovetails, and Slots

Metric Dimensions and Tolerances

Machining Symbols, Bosses, and Pads

Surface Texture

Tapers and Chamfers

Undercuts and Knurling

Screw Thread Specifications

Screw Thread Representation and Threaded Fasteners

Pipe Threads

Assembly Drawings

Welding Symbols

Geometric Tolerances - Datums

Geometric Tolerances - Location and Form

Filters