Question 1

What is the difference between RAM and ROM? What is each used for?

Accepted Answer

RAM requires a constant supply of electr

Question 2

USB version 2 allows a transfer speed of up to ____ per second (most USB supports up to 12MB per second), and can be used with a device called a USB hub to allow up to ____ different devices to connect to one USB port on the mainboard.

Accepted Answer

A) 24MB, 63 
B) 480MB, 127 
C) 480GB, 255 
D) 1000GB, 255 
A) 24MB, 63 
B) 480MB, 127 
C) 480GB, 255 
D) 1000GB, 255

Question 3

Match between columns
                        Premises: A small working area of RAM where the CPU can pass information to and receive information from a device.
Shuts off power to components such as PCMCIA devices if they are not being used.
Ability to automatically assign the correct IRQ, I/O address, and DMA channel (if used)without any user intervention.
Term for a processor that is able to complete more than one command in any given cycle.
The computer chips on a computer mainboard that contain the programs used to initialize hardware components at boot time.
Specifies a unique channel to the CPU, labeled with a number between 0 and 15.
A multi-processor system in which each processor is given a certain role or set of tasks to complete independently of the other processors.
Total number of pixels that can be displayed on a computer video screen.
The type of physical memory used for Level 2 processor caches and any memory chips attached directly to the main circuit boards of the computer.

Accepted Answer

The Answer of Input/Output (I/O)address and SRAM and IRQ and is...

Question 4

List and describe the tools that can be used to gather hardware information.

Accepted Answer

The computer manuals that are shipped wi

Question 5

The most important software information required before installation is the software packages needed to customize the Linux system to perform certain tasks.

Accepted Answer

A) True 
 B)False

Question 6

Before installing Linux, each individual hardware component in your computer should be checked against the _________________________.

Accepted Answer

HCL,Hardware Compati

Question 7

The information stored on ____ does not need constant refreshing and can go for short periods without a flow of electricity.

Accepted Answer

A) SDRAM 
B) RDRAM 
C) DDR SDRAM 
D) SRAM 
A) SDRAM 
B) RDRAM 
C) DDR SDRAM 
D) SRAM

Question 8

The ____ stores information for retrieval in a separate computer chip that is connected to the processor via a high-speed link.

Accepted Answer

A) Level 1 (L1)cache 
B) Level 2 (L2)cache 
C) Level 3 (L3)cache 
D) Control Unit 
A) Level 1 (L1)cache 
B) Level 2 (L2)cache 
C) Level 3 (L3)cache 
D) Control Unit

Question 9

The core component of any computer is the _________________________.

Accepted Answer

(CPU),central proces

Question 10

The table of all partition information for a certain hard disk is stored is called the _________________________.

Accepted Answer

MBR,Master

Question 11

____ ports allow a small card to be inserted into the computer with the electronics necessary to provide a certain function.

Accepted Answer

A) PCMCIA 
B) FireWire 
C) USB 
D) LPT 
A) PCMCIA 
B) FireWire 
C) USB 
D) LPT

Question 12

The NIC settings can be automatically configured during installation, provided a(n)_________________________ server exists on the network.

Accepted Answer

DHCP,Dynamic Host Co

What is the difference between RAM and ROM? What is each used for?

USB version 2 allows a transfer speed of up to per second (most USB supports up to 12MB per second), and can be used with a device called a USB hub to allow up to different devices to connect to one USB port on the mainboard.

List and describe the tools that can be used to gather hardware information.

The most important software information required before installation is the software packages needed to customize the Linux system to perform certain tasks.

Before installing Linux, each individual hardware component in your computer should be checked against the _________________________.

The information stored on ____ does not need constant refreshing and can go for short periods without a flow of electricity.

The ____ stores information for retrieval in a separate computer chip that is connected to the processor via a high-speed link.

The core component of any computer is the _________________________.

The table of all partition information for a certain hard disk is stored is called the _________________________.

____ ports allow a small card to be inserted into the computer with the electronics necessary to provide a certain function.

The NIC settings can be automatically configured during installation, provided a(n)_________________________ server exists on the network.

Introduction to Linux

Linux Installation and Usage

Exploring Linux Filesystems

Linux Filesystem Management

Linux Filesystem Administration

Advanced Installation

Working With the Bash Shell

System Initialization and X Windows

Managing Linux Processes

Common Administrative Tasks

Compression, System Backup, and Software Installation

Troubleshooting and Performance

Network Configuration

Configuring Network Services and Security

Filters

Exam 2: Preparing for Linux Installation

What is the difference between RAM and ROM? What is each used for?

USB version 2 allows a transfer speed of up to ____ per second (most USB supports up to 12MB per second), and can be used with a device called a USB hub to allow up to ____ different devices to connect to one USB port on the mainboard.

List and describe the tools that can be used to gather hardware information.

The most important software information required before installation is the software packages needed to customize the Linux system to perform certain tasks.

Before installing Linux, each individual hardware component in your computer should be checked against the _________________________.

The information stored on ____ does not need constant refreshing and can go for short periods without a flow of electricity.

The ____ stores information for retrieval in a separate computer chip that is connected to the processor via a high-speed link.

The core component of any computer is the _________________________.

The table of all partition information for a certain hard disk is stored is called the _________________________.

____ ports allow a small card to be inserted into the computer with the electronics necessary to provide a certain function.

The NIC settings can be automatically configured during installation, provided a(n)_________________________ server exists on the network.

Introduction to Linux

Linux Installation and Usage

Exploring Linux Filesystems

Linux Filesystem Management

Linux Filesystem Administration

Advanced Installation

Working With the Bash Shell

System Initialization and X Windows

Managing Linux Processes

Common Administrative Tasks

Compression, System Backup, and Software Installation

Troubleshooting and Performance

Network Configuration

Configuring Network Services and Security

Filters

USB version 2 allows a transfer speed of up to per second (most USB supports up to 12MB per second), and can be used with a device called a USB hub to allow up to different devices to connect to one USB port on the mainboard.