Question 1

To ensure that Linux has detected the correct amount of RAM in the system after installation, you can view the contents of the ____ file.

Accepted Answer

A) /proc/mem 
B) /proc/cpuinfo 
C) /proc/memoryinfo 
D) /proc/meminfo 
A) /proc/mem 
B) /proc/cpuinfo 
C) /proc/memoryinfo 
D) /proc/meminfo

Question 2

To verify hardware settings, you can examine the contents of the ____ directory.

Accepted Answer

A) /log 
B) /root 
C) /proc 
D) /hw 
A) /log 
B) /root 
C) /proc 
D) /hw

Question 3

By default, IRQ 7 is assigned to ____.

Accepted Answer

A) LPT2 
B) LPT1 
C) the keyboard 
D) the floppy disk controller 
A) LPT2 
B) LPT1 
C) the keyboard 
D) the floppy disk controller

Question 4

A(n)____________________ BIOS automatically assigns the necessary configuration information (IRQs, I/O addresses, and DMAs)to devices and avoids conflicts.

Accepted Answer

The answer of A(n)____________________ BIOS automatically assigns the necessary configuration...

Question 5

What is a SCSI ID and why is it used? List the priorities, from highest to lowest, of the SCSI IDs on a SCSI controller that supports 15 devices.

Accepted Answer

SCSI disk drives must be configured such

Question 6

RAID level ____ is often referred to as disk mirroring.

Accepted Answer

A) 1 
B) 2 
C) 3 
D) 4 
A) 1 
B) 2 
C) 3 
D) 4

Question 7

To perform a Linux installation over a network, you can connect to a server with the appropriate installation files via FTP.

Accepted Answer

A) True 
 B)False

Question 8

Some installations fail to place a boot loader on the hard disk properly; this is often the case with large hard disk drives that have over ____ cylinders.

Accepted Answer

A) 256 
B) 512 
C) 1024 
D) 2048 
A) 256 
B) 512 
C) 1024 
D) 2048

Question 9

The ____ file in the /proc directory contains a list of memory address ranges reserved for device use.

Accepted Answer

A) meminfo 
B) ioports 
C) iomem 
D) misc 
A) meminfo 
B) ioports 
C) iomem 
D) misc

Question 10

____ installation log file(s)is/are created by the Red Hat installation program.

Accepted Answer

A) One 
B) Two 
C) Three 
D) Four 
A) One 
B) Two 
C) Three 
D) Four

Question 11

IRQ 2 and IRQ 9 are linked such that they are seen by the system as a single IRQ.

Accepted Answer

A) True 
 B)False

Question 12

Multiple devices can use a DMA channel simultaneously.

Accepted Answer

A) True 
 B)False

To ensure that Linux has detected the correct amount of RAM in the system after installation, you can view the contents of the ____ file.

To verify hardware settings, you can examine the contents of the ____ directory.

By default, IRQ 7 is assigned to ____.

A(n)____________________ BIOS automatically assigns the necessary configuration information (IRQs, I/O addresses, and DMAs)to devices and avoids conflicts.

What is a SCSI ID and why is it used? List the priorities, from highest to lowest, of the SCSI IDs on a SCSI controller that supports 15 devices.

RAID level ____ is often referred to as disk mirroring.

To perform a Linux installation over a network, you can connect to a server with the appropriate installation files via FTP.

Some installations fail to place a boot loader on the hard disk properly; this is often the case with large hard disk drives that have over ____ cylinders.

The ____ file in the /proc directory contains a list of memory address ranges reserved for device use.

____ installation log file(s)is/are created by the Red Hat installation program.

IRQ 2 and IRQ 9 are linked such that they are seen by the system as a single IRQ.

Multiple devices can use a DMA channel simultaneously.

Introduction to Linux

Preparing for Linux Installation

Linux Installation and Usage

Exploring Linux Filesystems

Linux Filesystem Management

Linux Filesystem Administration

Working With the Bash Shell

System Initialization and X Windows

Managing Linux Processes

Common Administrative Tasks

Compression, System Backup, and Software Installation

Troubleshooting and Performance

Network Configuration

Configuring Network Services and Security

Filters

Exam 7: Advanced Installation

To ensure that Linux has detected the correct amount of RAM in the system after installation, you can view the contents of the ____ file.

To verify hardware settings, you can examine the contents of the ____ directory.

By default, IRQ 7 is assigned to ____.

A(n)____________________ BIOS automatically assigns the necessary configuration information (IRQs, I/O addresses, and DMAs)to devices and avoids conflicts.

What is a SCSI ID and why is it used? List the priorities, from highest to lowest, of the SCSI IDs on a SCSI controller that supports 15 devices.

RAID level ____ is often referred to as disk mirroring.

To perform a Linux installation over a network, you can connect to a server with the appropriate installation files via FTP.

Some installations fail to place a boot loader on the hard disk properly; this is often the case with large hard disk drives that have over ____ cylinders.

The ____ file in the /proc directory contains a list of memory address ranges reserved for device use.

____ installation log file(s)is/are created by the Red Hat installation program.

IRQ 2 and IRQ 9 are linked such that they are seen by the system as a single IRQ.

Multiple devices can use a DMA channel simultaneously.

Introduction to Linux

Preparing for Linux Installation

Linux Installation and Usage

Exploring Linux Filesystems

Linux Filesystem Management

Linux Filesystem Administration

Working With the Bash Shell

System Initialization and X Windows

Managing Linux Processes

Common Administrative Tasks

Compression, System Backup, and Software Installation

Troubleshooting and Performance

Network Configuration

Configuring Network Services and Security

Filters