Question 1

What component is a hot-pluggable CRU?

Accepted Answer

A)  DPE BBU 
B)  DPE I/O module 
C)  80 drive DAE cooling module 
D)  25 drive DPE cooling module 
A)  DPE BBU 
B)  DPE I/O module 
C)  80 drive DAE cooling module 
D)  25 drive DPE cooling module

Question 2

What is a consideration when managing Host I/O Limit polices?

Accepted Answer

A)  Only shared Host I/O Limit policies can be paused and resumed 
B)  All policies are resumed when any single policy is resumed 
C)  Each policy can be paused or resumed independently. 
D)  All policies are paused if a single policy is paused. 
A)  Only shared Host I/O Limit policies can be paused and resumed 
B)  All policies are resumed when any single policy is resumed 
C)  Each policy can be paused or resumed independently. 
D)  All policies are paused if a single policy is paused.

Question 3

Which Directory Services can be configured in the Unisphere Settings window?

Accepted Answer

A)  LDAP 
B)  NIS 
C)  NDS 
D)  Active Directory 
A)  LDAP 
B)  NIS 
C)  NDS 
D)  Active Directory

Question 4

What is an advantage for selecting Centralized ESRS over Integrated ESRS?

Accepted Answer

A)  External virtual machine is not required 
B)  WAN compression is not required to Unity systems 
C)  CHAP security is not required between Unity systems 
D)  Internet connectivity is not required for every Unity system 
A)  External virtual machine is not required 
B)  WAN compression is not required to Unity systems 
C)  CHAP security is not required between Unity systems 
D)  Internet connectivity is not required for every Unity system

Question 5

A file system is 1 TB in size and contains 250 GB of data. The file system is not fully allocated and only 450 GB of pool storage is in use. The user wants to reduce the file system to 300 GB. How much space is returned to the storage pool?

Accepted Answer

A)  150 GB 
B)  450 GB 
C)  700 GB 
D)  750 GB 
A)  150 GB 
B)  450 GB 
C)  700 GB 
D)  750 GB

Question 6

Which Unity feature supports provisioning within vCenter, provides full visibility to physical storage, and increases management efficiency?

Accepted Answer

A)  VSI 
B)  ODX 
C)  ESI 
D)  VAAI 
A)  VSI 
B)  ODX 
C)  ESI 
D)  VAAI

Question 7

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

Accepted Answer

A)  Create a snapshot of the LUN Configure LUN access for the secondary host Attach the snapshot to the secondary host 
B)  Configure snapshot access to the LUN for the secondary host 
C)  Create a Synchronous Replication session for the LUN Configure access to the replica LUN for the secondary host Attach the secondary host 
D)  Create an Asynchronous Replication on session for the LUN 
A)  Create a snapshot of the LUN Configure LUN access for the secondary host Attach the snapshot to the secondary host 
B)  Configure snapshot access to the LUN for the secondary host 
C)  Create a Synchronous Replication session for the LUN Configure access to the replica LUN for the secondary host Attach the secondary host 
D)  Create an Asynchronous Replication on session for the LUN

Question 8

In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?

Accepted Answer

A)  Exit the Service Mode task 
B)  Reboot the Storage Processor 
C)  Reboot the storage system 
D)  Restart the Management software 
A)  Exit the Service Mode task 
B)  Reboot the Storage Processor 
C)  Reboot the storage system 
D)  Restart the Management software

Question 9

Which layer of the Dell EMC Unity storage architecture provides access to both the virtual storage pool and configured LUN resources?

Accepted Answer

A)  Enclosure Services Interface 
B)  Common software 
C)  SCSI Enclosure Services 
D)  Communications Management interface 
A)  Enclosure Services Interface 
B)  Common software 
C)  SCSI Enclosure Services 
D)  Communications Management interface

Question 10

A storage administrator is considering adding another application to run on their Unity 300 but they are concerned about the application's performance. They ask what is considered "normal" for CPU utilization. Based on Dell EMC best practices, what should be your response?

Accepted Answer

A)  Below 50% 
B)  50% - 70% 
C)  70% - 90% 
D)  90% - 95% 
A)  Below 50% 
B)  50% - 70% 
C)  70% - 90% 
D)  90% - 95%

Question 11

A storage administrator is creating a host profile in Unisphere to provide host access to block storage resources using the iSCSI protocol. The host initiators were not automatically discovered and must be manually added. In addition to the SAN host IQN, what other configuration can be performed through the "Create iSCSI Initiator Wizard" window?

Accepted Answer

A)  Enable and disable CHAP settings 
B)  Create Mutual CHAP secret 
C)  Create Global CHAP secret 
D)  Enter CHAP username and secret 
A)  Enable and disable CHAP settings 
B)  Create Mutual CHAP secret 
C)  Create Global CHAP secret 
D)  Enter CHAP username and secret

Question 12

Which operation can be performed on the General tab of the LUN Properties page?

Accepted Answer

A)  Extand the LUN 
B)  Grant Host access 
C)  Replicate the LUN 
D)  Set Host I/O limits 
A)  Extand the LUN 
B)  Grant Host access 
C)  Replicate the LUN 
D)  Set Host I/O limits

Question 13

What is a consideration when implementing a Thin Clone on a Dell EMC Unity array?

Accepted Answer

A)  Thin Clone is only supported on physical Dell EMC Unity systems. 
B)  Thin Clone can be expanded independently from the base LUN 
C)  Thin Clone can be created directly from the base LUN 
D)  Data Reduction can be enabled independently on source LUN and on Thin Clone 
A)  Thin Clone is only supported on physical Dell EMC Unity systems. 
B)  Thin Clone can be expanded independently from the base LUN 
C)  Thin Clone can be created directly from the base LUN 
D)  Data Reduction can be enabled independently on source LUN and on Thin Clone

Question 14

For high availability within iSCSI, connections should be attached using what?

Accepted Answer

A)  Different subnets 
B)  Flow control 
C)  Twinax cables 
D)  Jumbo frames 
A)  Different subnets 
B)  Flow control 
C)  Twinax cables 
D)  Jumbo frames

Question 15

When can a file system be defined as thin or thick?

Accepted Answer

A)  Only when creating the file system 
B)  Any time after the file system has been created 
C)  Only when adding host access to the file system 
D)  Only when enabling data reduction on the file system 
A)  Only when creating the file system 
B)  Any time after the file system has been created 
C)  Only when adding host access to the file system 
D)  Only when enabling data reduction on the file system

Question 16

What is the maximum storage capacity supported by a Dell EMC UnityVSA with the Community Edition subscription?

Accepted Answer

A)  4 TB 
B)  10 TB 
C)  25 TB 
D)  50 TB 
A)  4 TB 
B)  10 TB 
C)  25 TB 
D)  50 TB

Question 17

What is the recommended configuration for iSCSI connections to ensure continuous access to the Dell EMC Unity storage system in the event of a failover?

Accepted Answer

A)  Set up iSCSI interfaces to use VLAN tagging and configure the host to utilize the same VLAN 
B)  Set up iSCSI interfaces on the same port of each SP and leverage the host-based multi-pathing software. 
C)  Set up iSCSI interfaces on network ports on different SPs that are configured with Fail Safe Networking (FSN) 
D)  Set up iSCSI interfaces on network ports that are configured with LACP on the same SP 
A)  Set up iSCSI interfaces to use VLAN tagging and configure the host to utilize the same VLAN 
B)  Set up iSCSI interfaces on the same port of each SP and leverage the host-based multi-pathing software. 
C)  Set up iSCSI interfaces on network ports on different SPs that are configured with Fail Safe Networking (FSN) 
D)  Set up iSCSI interfaces on network ports that are configured with LACP on the same SP

Question 18

What is used by the Local LUN Move data mobility feature?

Accepted Answer

A)  Transparent Data Transfer 
B)  SANCopy push 
C)  Inband Migration Tool 
D)  Common base Snapshots 
A)  Transparent Data Transfer 
B)  SANCopy push 
C)  Inband Migration Tool 
D)  Common base Snapshots

Question 19

What is the maximum number of Dell EMC Unity arrays that can participate is a Synchronous Replication topology?

Accepted Answer

A)  2 
B)  4 
C)  5 
D)  16 
A)  2 
B)  4 
C)  5 
D)  16

Question 20

What is one method that is used to verify an ESRS configuration?

Accepted Answer

A)  Proxy server authentication 
B)  RSA authentication 
C)  Trigger an SNMP trap test 
D)  Send an e-mail verification 
A)  Proxy server authentication 
B)  RSA authentication 
C)  Trigger an SNMP trap test 
D)  Send an e-mail verification

What component is a hot-pluggable CRU?

What is a consideration when managing Host I/O Limit polices?

Which Directory Services can be configured in the Unisphere Settings window?

What is an advantage for selecting Centralized ESRS over Integrated ESRS?

A file system is 1 TB in size and contains 250 GB of data. The file system is not fully allocated and only 450 GB of pool storage is in use. The user wants to reduce the file system to 300 GB. How much space is returned to the storage pool?

Which Unity feature supports provisioning within vCenter, provides full visibility to physical storage, and increases management efficiency?

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?

Which layer of the Dell EMC Unity storage architecture provides access to both the virtual storage pool and configured LUN resources?

A storage administrator is considering adding another application to run on their Unity 300 but they are concerned about the application's performance. They ask what is considered "normal" for CPU utilization. Based on Dell EMC best practices, what should be your response?

Which operation can be performed on the General tab of the LUN Properties page?

What is a consideration when implementing a Thin Clone on a Dell EMC Unity array?

For high availability within iSCSI, connections should be attached using what?

When can a file system be defined as thin or thick?

What is the maximum storage capacity supported by a Dell EMC UnityVSA with the Community Edition subscription?

What is the recommended configuration for iSCSI connections to ensure continuous access to the Dell EMC Unity storage system in the event of a failover?

What is used by the Local LUN Move data mobility feature?

What is the maximum number of Dell EMC Unity arrays that can participate is a Synchronous Replication topology?

What is one method that is used to verify an ESRS configuration?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 3: RecoverPoint Specialist for Implementation Engineers

What component is a hot-pluggable CRU?

What is a consideration when managing Host I/O Limit polices?

Which Directory Services can be configured in the Unisphere Settings window?

What is an advantage for selecting Centralized ESRS over Integrated ESRS?

A file system is 1 TB in size and contains 250 GB of data. The file system is not fully allocated and only 450 GB of pool storage is in use. The user wants to reduce the file system to 300 GB. How much space is returned to the storage pool?

Which Unity feature supports provisioning within vCenter, provides full visibility to physical storage, and increases management efficiency?

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?

Which layer of the Dell EMC Unity storage architecture provides access to both the virtual storage pool and configured LUN resources?

A storage administrator is considering adding another application to run on their Unity 300 but they are concerned about the application's performance. They ask what is considered "normal" for CPU utilization. Based on Dell EMC best practices, what should be your response?

Which operation can be performed on the General tab of the LUN Properties page?

What is a consideration when implementing a Thin Clone on a Dell EMC Unity array?

For high availability within iSCSI, connections should be attached using what?

When can a file system be defined as thin or thick?

What is the maximum storage capacity supported by a Dell EMC UnityVSA with the Community Edition subscription?

What is the recommended configuration for iSCSI connections to ensure continuous access to the Dell EMC Unity storage system in the event of a failover?

What is used by the Local LUN Move data mobility feature?

What is the maximum number of Dell EMC Unity arrays that can participate is a Synchronous Replication topology?

What is one method that is used to verify an ESRS configuration?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters