Question 1

What is the maximum number of virtual volumes that can be placed into a single consistency group?

Accepted Answer

A)  800 
B)  900 
C)  1000 
D)  1100 
A)  800 
B)  900 
C)  1000 
D)  1100 C

Question 2

Which protocol does the service laptop use to communicate with and maintain an EMC VPLEX environment?

Accepted Answer

A)  SSH 
B)  SNMP 
C)  Telnet 
D)  UDP 
A)  SSH 
B)  SNMP 
C)  Telnet 
D)  UDP D

Question 3

When using VPLEX Metro, what is the supported round trip time between clusters?

Accepted Answer

A)  5 ms 
B)  15 ms 
C)  20 ms 
D)  30 ms 
A)  5 ms 
B)  15 ms 
C)  20 ms 
D)  30 ms A

Question 4

You set up a meeting to gather information on a new project with the IT manager and plan to use a workflow profile assessment (WPA) to document the requirements. Why is it recommended to talk to as many stakeholders as possible?

Accepted Answer

A)  Helps downstream personnel, such as implementation and delivery, to have a clearer understanding of the requirements. 
B)  Completing this document gives sales a list of who the stakeholders are at customer site. 
C)  Using workflow profile enables sales to take this information to EMC consulting for review to validate the configuration. 
D)  Using the WPA tool will give you the best "big picture" to see things such as block size, de-dupe, file size and volumes. 
A)  Helps downstream personnel, such as implementation and delivery, to have a clearer understanding of the requirements. 
B)  Completing this document gives sales a list of who the stakeholders are at customer site. 
C)  Using workflow profile enables sales to take this information to EMC consulting for review to validate the configuration. 
D)  Using the WPA tool will give you the best "big picture" to see things such as block size, de-dupe, file size and volumes.

Question 5

What is a characteristic of global commands in the VPlexcli?

Accepted Answer

A)  Executable from any director 
B)  Control tasks running on all directors 
C)  Run exclusively from the root context 
D)  Accessible from all contexts 
A)  Executable from any director 
B)  Control tasks running on all directors 
C)  Run exclusively from the root context 
D)  Accessible from all contexts

Question 6

What is the maximum number of synchronous consistency groups supported by VPLEX?

Accepted Answer

A)  256 
B)  512 
C)  1024 
D)  2048 
A)  256 
B)  512 
C)  1024 
D)  2048

Question 7

Which type of statistics is used to track latencies, determine median, mode, percentiles, minimums, and maximums?

Accepted Answer

A)  Buckets 
B)  Monitors 
C)  Readings 
D)  Counters 
A)  Buckets 
B)  Monitors 
C)  Readings 
D)  Counters

Question 8

What is a supported geometry for a VPLEX device?

Accepted Answer

A)  JBOD 
B)  RAID-5 
C)  RAID-C 
D)  2-1 mapping 
A)  JBOD 
B)  RAID-5 
C)  RAID-C 
D)  2-1 mapping

Question 9

Which VPLEX model is recommended for VPLEX for All Flash (VAF)?

Accepted Answer

A)  VS2 and VS6 
B)  VS6 only 
C)  VS2 only 
D)  VS1 
A)  VS2 and VS6 
B)  VS6 only 
C)  VS2 only 
D)  VS1

Question 10

What is required before a host can detect the virtual volumes presented by the VPLEX?

Accepted Answer

A)  Virtual volumes can only be detected after a reboot 
B)  RAID configuration must be enabled for Virtual volumes 
C)  EZ Provisioning wizard must be run on the host 
D)  Host must initiate a bus-scan of the HBAs 
A)  Virtual volumes can only be detected after a reboot 
B)  RAID configuration must be enabled for Virtual volumes 
C)  EZ Provisioning wizard must be run on the host 
D)  Host must initiate a bus-scan of the HBAs

Question 11

In preparing a host to access its storage from VPLEX, what is considered a best practice when zoning?

Accepted Answer

A)  Ports on host HBA should be zoned to either an A director or a B director. 
B)  Each host should have at least one path to an A director and at least one path to a B director on each fabric, for a total of four logical paths. 
C)  Dual fabrics should be merged into a single fabric to ensure all zones are in a single zoneset. 
D)  Each host should have either one path to an A director or one path to a B director on each fabric, for a minimum of two logical paths. 
A)  Ports on host HBA should be zoned to either an A director or a B director. 
B)  Each host should have at least one path to an A director and at least one path to a B director on each fabric, for a total of four logical paths. 
C)  Dual fabrics should be merged into a single fabric to ensure all zones are in a single zoneset. 
D)  Each host should have either one path to an A director or one path to a B director on each fabric, for a minimum of two logical paths.

Question 12

VPLEX Metro has been added to an existing HP OpenView network monitoring environment. The VPLEX SNMP agent and other integration information have been added to assist in the implementation. After VPLEX is added to SNMP monitoring, only the remote VPLEX cluster is reporting performance statistics. What is the cause of this issue?

Accepted Answer

A)  Local VPLEX Witness has a misconfigured SNMP agent. 
B)  HP OpenView is running SNMP version 2C, which may cause reporting that does not contain the performance statistics. 
C)  TCP Port 443 is blocked at the local site's firewall. 
D)  Local VPLEX cluster management server has a misconfigured SNMP agent. 
A)  Local VPLEX Witness has a misconfigured SNMP agent. 
B)  HP OpenView is running SNMP version 2C, which may cause reporting that does not contain the performance statistics. 
C)  TCP Port 443 is blocked at the local site's firewall. 
D)  Local VPLEX cluster management server has a misconfigured SNMP agent.

Question 13

You get a call from a customer that has just added 200 user connections to the cluster. They want to know how fast they are writing data with these new users. What tool would you use to gather this information?

Accepted Answer

A)  InsightIQ 
B)  Network Monitor 
C)  Wireshark 
D)  Watch4net 
A)  InsightIQ 
B)  Network Monitor 
C)  Wireshark 
D)  Watch4net

Question 14

What is the relationship between a storage volume and an extent?

Accepted Answer

A)  A storage volume can be split into multiple extents 
B)  An extent must map to an entire storage volume 
C)  A storage volume can be created out of multiple extents 
D)  An extent can span multiple storage volumes 
A)  A storage volume can be split into multiple extents 
B)  An extent must map to an entire storage volume 
C)  A storage volume can be created out of multiple extents 
D)  An extent can span multiple storage volumes

Question 15

You are helping a customer create a cost-effective Isilon solution. The customer environment includes high IOPS-intensive, random access file-based applications. Which Isilon storage node type will meet the customer's needs?

Accepted Answer

A)  S-Series 
B)  NL-Series 
C)  X-Series 
D)  Performance Accelerator 
A)  S-Series 
B)  NL-Series 
C)  X-Series 
D)  Performance Accelerator

Question 16

What is a consideration when using VPLEX RecoverPoint enabled consistency groups?

Accepted Answer

A)  Repository volume and journal volumes must be in different consistency groups. 
B)  Local virtual volumes and distributed virtual volumes can be in the same consistency group. 
C)  Local copy volumes and production volumes must reside in separate consistency groups. 
D)  Production and local copy journals must be in different consistency groups. 
A)  Repository volume and journal volumes must be in different consistency groups. 
B)  Local virtual volumes and distributed virtual volumes can be in the same consistency group. 
C)  Local copy volumes and production volumes must reside in separate consistency groups. 
D)  Production and local copy journals must be in different consistency groups.

Question 17

Which type of VPLEX statistic provides an instantaneous value that displays CPU utilization and memory utilization?

Accepted Answer

A)  Buckets 
B)  Counters 
C)  Readings 
D)  Journal Lag 
A)  Buckets 
B)  Counters 
C)  Readings 
D)  Journal Lag

Question 18

Which protocol is presented by "B" in the exhibit?

Accepted Answer

A)  FC 
B)  iSCSI 
C)  FCoE 
D)  IPFC 
A)  FC 
B)  iSCSI 
C)  FCoE 
D)  IPFC

Question 19

What is a valid target for a device data migration in VPLEX?

Accepted Answer

A)  Distributed device 
B)  Device with no existing virtual volume 
C)  Device with an existing virtual volume 
D)  Extent 
A)  Distributed device 
B)  Device with no existing virtual volume 
C)  Device with an existing virtual volume 
D)  Extent

Question 20

What condition would prevent volume expansion?

Accepted Answer

A)  Migration occurring on the volume 
B)  Volume not belonging to a consistency group 
C)  Metadata volume being backed up 
D)  Logging volume in re-synchronization state 
A)  Migration occurring on the volume 
B)  Volume not belonging to a consistency group 
C)  Metadata volume being backed up 
D)  Logging volume in re-synchronization state

What is the maximum number of virtual volumes that can be placed into a single consistency group?

Which protocol does the service laptop use to communicate with and maintain an EMC VPLEX environment?

When using VPLEX Metro, what is the supported round trip time between clusters?

You set up a meeting to gather information on a new project with the IT manager and plan to use a workflow profile assessment (WPA) to document the requirements. Why is it recommended to talk to as many stakeholders as possible?

What is a characteristic of global commands in the VPlexcli?

What is the maximum number of synchronous consistency groups supported by VPLEX?

Which type of statistics is used to track latencies, determine median, mode, percentiles, minimums, and maximums?

What is a supported geometry for a VPLEX device?

Which VPLEX model is recommended for VPLEX for All Flash (VAF)?

What is required before a host can detect the virtual volumes presented by the VPLEX?

In preparing a host to access its storage from VPLEX, what is considered a best practice when zoning?

You get a call from a customer that has just added 200 user connections to the cluster. They want to know how fast they are writing data with these new users. What tool would you use to gather this information?

What is the relationship between a storage volume and an extent?

You are helping a customer create a cost-effective Isilon solution. The customer environment includes high IOPS-intensive, random access file-based applications. Which Isilon storage node type will meet the customer's needs?

What is a consideration when using VPLEX RecoverPoint enabled consistency groups?

Which type of VPLEX statistic provides an instantaneous value that displays CPU utilization and memory utilization?

Which protocol is presented by "B" in the exhibit?

What is a valid target for a device data migration in VPLEX?

What condition would prevent volume expansion?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 6: Isilon Solutions and Design Specialist for Technology Architects

What is the maximum number of virtual volumes that can be placed into a single consistency group?

Which protocol does the service laptop use to communicate with and maintain an EMC VPLEX environment?

When using VPLEX Metro, what is the supported round trip time between clusters?

You set up a meeting to gather information on a new project with the IT manager and plan to use a workflow profile assessment (WPA) to document the requirements. Why is it recommended to talk to as many stakeholders as possible?

What is a characteristic of global commands in the VPlexcli?

What is the maximum number of synchronous consistency groups supported by VPLEX?

Which type of statistics is used to track latencies, determine median, mode, percentiles, minimums, and maximums?

What is a supported geometry for a VPLEX device?

Which VPLEX model is recommended for VPLEX for All Flash (VAF)?

What is required before a host can detect the virtual volumes presented by the VPLEX?

In preparing a host to access its storage from VPLEX, what is considered a best practice when zoning?

You get a call from a customer that has just added 200 user connections to the cluster. They want to know how fast they are writing data with these new users. What tool would you use to gather this information?

What is the relationship between a storage volume and an extent?

You are helping a customer create a cost-effective Isilon solution. The customer environment includes high IOPS-intensive, random access file-based applications. Which Isilon storage node type will meet the customer's needs?

What is a consideration when using VPLEX RecoverPoint enabled consistency groups?

Which type of VPLEX statistic provides an instantaneous value that displays CPU utilization and memory utilization?

Which protocol is presented by "B" in the exhibit?

What is a valid target for a device data migration in VPLEX?

What condition would prevent volume expansion?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters