Question 1

Which condition will prevent HPE OneView from reapplying a server profile?

Accepted Answer

A)  The server hardware is in a degraded state 
B)  The server profile is assigned to the server hardware 
C)  The server hardware is powered off 
D)  The server hardware matches the server hardware type defined in the profile 
A)  The server hardware is in a degraded state 
B)  The server profile is assigned to the server hardware 
C)  The server hardware is powered off 
D)  The server hardware matches the server hardware type defined in the profile D

Question 2

Which behavior is the result of Device bay + server hardware affinity?

Accepted Answer

A)  When a blade server is replaced with a new one with the same serial number, the server profile is not reapplied. 
B)  When a blade server is replaced with a new one with a different serial number, the server profile is not applied. 
C)  When a blade server is moved to a different bay, the server profile is reapplied. 
D)  When a blade server is replaced with a new one with a different serial number, the server profile is reapplied. 
A)  When a blade server is replaced with a new one with the same serial number, the server profile is not reapplied. 
B)  When a blade server is replaced with a new one with a different serial number, the server profile is not applied. 
C)  When a blade server is moved to a different bay, the server profile is reapplied. 
D)  When a blade server is replaced with a new one with a different serial number, the server profile is reapplied. B

Question 3

A customer has an environment including HPE ProLiant DL servers and HPE 3PAR storage arrays. They are planning to provision storage using HPE OneView. Which licensing configuration will meet the customer needs?

Accepted Answer

A)  An HPE 3PAR Virtual Domain License must be activated on the HPE 3PAR storage array. 
B)  An HPE 3PAR Online Import License must be enabled on the HPE 3PAR storage array. 
C)  An HPE OneView Advanced License is required for every HPE server with provisioned storage. 
D)  An FC Upgrade License is required for every HPE server to enable FC connectivity. 
A)  An HPE 3PAR Virtual Domain License must be activated on the HPE 3PAR storage array. 
B)  An HPE 3PAR Online Import License must be enabled on the HPE 3PAR storage array. 
C)  An HPE OneView Advanced License is required for every HPE server with provisioned storage. 
D)  An FC Upgrade License is required for every HPE server to enable FC connectivity. C

Question 4

An administrator is configuring a server profile template, but does not see the Ethernet network called "VLAN 210" that had been created earlier. What could the cause be?

Accepted Answer

A)  VLAN 210 was never configured in the Logical Interconnect Group. 
B)  VLAN 210 does not exist on the upstream switches. 
C)  VLAN 210 is already in a Network Set. 
D)  VLAN 210 has Private Network enabled. 
A)  VLAN 210 was never configured in the Logical Interconnect Group. 
B)  VLAN 210 does not exist on the upstream switches. 
C)  VLAN 210 is already in a Network Set. 
D)  VLAN 210 has Private Network enabled.

Question 5

A systems administrator needs to add a VLAN to a network set to support a new application. They have added the network to the upstream switch and the Logical Interconnect Group in HPE OneView but traffic is not passing. What is the most likely cause of the problem?

Accepted Answer

A)  Intelligent Management Center (IM
C)  has not been updated via REST 
B)  The upstream switch doesn't have the VLAN enabled 
C)  The administrator needs to update the Logical Interconnects from the Logical Interconnect Group 
D)  The administrator failed to update the state change message bus 
A)  Intelligent Management Center (IM
C)  has not been updated via REST 
B)  The upstream switch doesn't have the VLAN enabled 
C)  The administrator needs to update the Logical Interconnects from the Logical Interconnect Group 
D)  The administrator failed to update the state change message bus

Question 6

A customer has a large environment with a mixture of HPE ProLiant DLs and BLs, and HPE Apollo devices all reporting to an HPE OneView appliance. In reviewing the devices in Map View, the administrator notices that two Gen6 devices aren't displaying as much information as other managed Gen7 and Gen8 devices. What is the most likely cause?

Accepted Answer

A)  The agent on the Gen6 device has stopped reporting data to HPE OneView 
B)  Remote support is not configured on the Gen6 devices 
C)  Gen6 devices are only monitored 
D)  Gen6 devices aren't supported by HPE OneView 
A)  The agent on the Gen6 device has stopped reporting data to HPE OneView 
B)  Remote support is not configured on the Gen6 devices 
C)  Gen6 devices are only monitored 
D)  Gen6 devices aren't supported by HPE OneView

Question 7

A server administrator wants to prevent excessive unknown destination frames from affecting the network performance of Synergy compute modules. Which HPE OneView setting at the Logical Interconnect Group level can help?

Accepted Answer

A)  storm control 
B)  loop protection 
C)  SNMPv3 
D)  IGMP snooping 
A)  storm control 
B)  loop protection 
C)  SNMPv3 
D)  IGMP snooping

Question 8

What is the connection between BIOS and firmware?

Accepted Answer

A)  BIOS is firmware that is exclusively used for Wake on LAN (WOL). 
B)  BIOS is firmware that is specific for video cards. 
C)  BIOS is firmware that is restricted for use with laptops. 
D)  BIOS is firmware that is only used during the booting process. 
A)  BIOS is firmware that is exclusively used for Wake on LAN (WOL). 
B)  BIOS is firmware that is specific for video cards. 
C)  BIOS is firmware that is restricted for use with laptops. 
D)  BIOS is firmware that is only used during the booting process.

Question 9

Which parameter does the server profile assign to a Flex-10 adapter in a blade server profile?

Accepted Answer

A)  MAC address 
B)  WWN 
C)  Hardware iSCSI initiator name 
D)  iLO IP address 
A)  MAC address 
B)  WWN 
C)  Hardware iSCSI initiator name 
D)  iLO IP address

Question 10

Which HPE product would you recommend to a customer who is running multiple HPE OneView appliances and Hyper Converged Systems to monitor their entire environment in a single application?

Accepted Answer

A)  Global Dashboard 
B)  HPE Synergy Composer 
C)  iLO Amplifier Pack 
D)  Central Management Console 
A)  Global Dashboard 
B)  HPE Synergy Composer 
C)  iLO Amplifier Pack 
D)  Central Management Console

Question 11

Which actions can be taken on alerts in the Activity page in HPE OneView?

Accepted Answer

A)  re-send email notification for specific alerts 
B)  assigning alerts to a specific user 
C)  delete alerts 
D)  forward alert to syslog server 
A)  re-send email notification for specific alerts 
B)  assigning alerts to a specific user 
C)  delete alerts 
D)  forward alert to syslog server

Question 12

Where is HPE OneView for Synergy deployed?

Accepted Answer

A)  on a virtual appliance running in Hyper-V 
B)  on a physical appliance - Image Streamer 
C)  on a physical appliance - Composer 
D)  on a virtual appliance running in VMware 
A)  on a virtual appliance running in Hyper-V 
B)  on a physical appliance - Image Streamer 
C)  on a physical appliance - Composer 
D)  on a virtual appliance running in VMware

Question 13

Which HPE tool can be integrated with HPE OneView to provision ToR switch ports automatically for newly added BladeSystem enclosures?

Accepted Answer

A)  Onboard Administrator 
B)  StoreServ Management Console 
C)  Synergy Composer 
D)  Global Dashboard 
E)  Intelligent Management Center 
A)  Onboard Administrator 
B)  StoreServ Management Console 
C)  Synergy Composer 
D)  Global Dashboard 
E)  Intelligent Management Center

Question 14

Why is HPE OneView periodic polling important?

Accepted Answer

A)  Because SNMP traps can be unreliable 
B)  Because a "SNMP Get" request cannot read the management information base (MI
B)  
C)  To prevent SNMP trap storms 
D)  To support different SNMP versions 
A)  Because SNMP traps can be unreliable 
B)  Because a "SNMP Get" request cannot read the management information base (MI
B)  
C)  To prevent SNMP trap storms 
D)  To support different SNMP versions

Question 15

What unique identifier does HPE OneView use to interact with each resource individually?

Accepted Answer

A)  serial number 
B)  MAC address 
C)  URI 
D)  WWN 
A)  serial number 
B)  MAC address 
C)  URI 
D)  WWN

Question 16

You added an iPDU to an environment managed by HPE OneView. How will servers that are connected to this iPDU be added to HPE OneView?

Accepted Answer

A)  with the same state (monitored or managed) as the iPDU 
B)  as managed devices if they have iLO Advanced license applied 
C)  in an unmanaged state 
D)  as monitored devices 
A)  with the same state (monitored or managed) as the iPDU 
B)  as managed devices if they have iLO Advanced license applied 
C)  in an unmanaged state 
D)  as monitored devices

Question 17

A customer is performing lifecycle management on their existing ESXi cluster. They edit the Server Profile Template for the ESXi cluster.   What will happen to all of the server profiles associated with the template after selecting the "Service Pack for HPE ProLiant 2017.07.1" and clicking OK?

Accepted Answer

A)  All server profiles associated with the template will be marked as inconsistent with the template 
B)  All server hardware associated with the profiles will immediately do a graceful shutdown and boot into Intelligent Provisioning to update the firmware 
C)  HPE OneView for vCenter will launch vCenter Update manager to begin updating the systems within the ESXi cluster 
D)  The Smart Update Tools will immediately begin to update the firmware and drivers on the systems while the ESXi hosts are still online 
A)  All server profiles associated with the template will be marked as inconsistent with the template 
B)  All server hardware associated with the profiles will immediately do a graceful shutdown and boot into Intelligent Provisioning to update the firmware 
C)  HPE OneView for vCenter will launch vCenter Update manager to begin updating the systems within the ESXi cluster 
D)  The Smart Update Tools will immediately begin to update the firmware and drivers on the systems while the ESXi hosts are still online

Question 18

Which option from the HPE OneView main menu provides the utilization data for a server?

Accepted Answer

A)  Settings 
B)  Server Hardware 
C)  Data Centers 
D)  Power Delivery Devices 
A)  Settings 
B)  Server Hardware 
C)  Data Centers 
D)  Power Delivery Devices

Question 19

What is required for a user to authenticate to an HPE OneView appliance configured for two-factor authentication?

Accepted Answer

A)  One-time Passwords 
B)  Smartcard 
C)  SMS 
D)  Self-signed certificate 
A)  One-time Passwords 
B)  Smartcard 
C)  SMS 
D)  Self-signed certificate

Question 20

You have a new HPE BladeSystem C7000 enclosure to add to your existing HPE OneView appliance as a management resource. What is the proper PowerShell Cmdlet to achieve this task?

Accepted Answer

A)  Add HPOVEnclosure -Hostname 192.168.1.100 -Username Administrator -Password MyP@ssw0rd 
B)  Add-HPOVServer -Hostname 192.130.4.520 -Username Administrator -Password MyP@ssw0rd 
C)  New-HPOVLogicalEnclosure - Name192.130.4.520 
D)  Add-HPOVPowerDevice -Hostname 192.168.1.100 -Username admin -Password MyP@ssw0rd 
A)  Add HPOVEnclosure -Hostname 192.168.1.100 -Username Administrator -Password MyP@ssw0rd 
B)  Add-HPOVServer -Hostname 192.130.4.520 -Username Administrator -Password MyP@ssw0rd 
C)  New-HPOVLogicalEnclosure - Name192.130.4.520 
D)  Add-HPOVPowerDevice -Hostname 192.168.1.100 -Username admin -Password MyP@ssw0rd

Exam 10: Building HPE Hybrid IT Solutions

Which condition will prevent HPE OneView from reapplying a server profile?

Which behavior is the result of Device bay + server hardware affinity?

A customer has an environment including HPE ProLiant DL servers and HPE 3PAR storage arrays. They are planning to provision storage using HPE OneView. Which licensing configuration will meet the customer needs?

An administrator is configuring a server profile template, but does not see the Ethernet network called "VLAN 210" that had been created earlier. What could the cause be?

A systems administrator needs to add a VLAN to a network set to support a new application. They have added the network to the upstream switch and the Logical Interconnect Group in HPE OneView but traffic is not passing. What is the most likely cause of the problem?

A server administrator wants to prevent excessive unknown destination frames from affecting the network performance of Synergy compute modules. Which HPE OneView setting at the Logical Interconnect Group level can help?

What is the connection between BIOS and firmware?

Which parameter does the server profile assign to a Flex-10 adapter in a blade server profile?

Which HPE product would you recommend to a customer who is running multiple HPE OneView appliances and Hyper Converged Systems to monitor their entire environment in a single application?

Which actions can be taken on alerts in the Activity page in HPE OneView?

Where is HPE OneView for Synergy deployed?

Which HPE tool can be integrated with HPE OneView to provision ToR switch ports automatically for newly added BladeSystem enclosures?

Why is HPE OneView periodic polling important?

What unique identifier does HPE OneView use to interact with each resource individually?

You added an iPDU to an environment managed by HPE OneView. How will servers that are connected to this iPDU be added to HPE OneView?

A customer is performing lifecycle management on their existing ESXi cluster. They edit the Server Profile Template for the ESXi cluster. What will happen to all of the server profiles associated with the template after selecting the "Service Pack for HPE ProLiant 2017.07.1" and clicking OK?

Which option from the HPE OneView main menu provides the utilization data for a server?

What is required for a user to authenticate to an HPE OneView appliance configured for two-factor authentication?

You have a new HPE BladeSystem C7000 enclosure to add to your existing HPE OneView appliance as a management resource. What is the proper PowerShell Cmdlet to achieve this task?

Designing Multi-Site HPE Storage Solutions

HPE Storage Solutions

Configuring HPE GreenLake Solutions

Architecting Advanced HPE Server Solutions

Designing HPE Server Solutions

Delta - Designing HPE Server Solutions

Designing HPE Hybrid IT Solutions

Implementing HPE Composable Infrastructure Solutions

Designing HPE Software-Defined Infrastructure Solutions

Designing HPE Nimble Solutions

Using HPE OneView

Selling Aruba Products and Solutions

Designing Aruba Solutions

Aruba Certified Design Associate

Aruba Certified ClearPass Professional (ACCP) V6.7

Aruba Certified Mobility Associate Exam

Aruba Certified Mobility Professional Exam

Aruba Certified Switching Associate

Aruba Certified Switching Professional

Aruba Certified Mobility Expert Written Exam

HPE Sales Certified - Aruba Products and Solutions

Filters