Question 1

A visual inspection of a new installation must be carried out:

Accepted Answer

A)  during the erection period 
B)  during testing upon completion 
C)  after testing upon completion 
D)  before testing upon completion. 
A)  during the erection period 
B)  during testing upon completion 
C)  after testing upon completion 
D)  before testing upon completion.

Question 2

Which hand tools would you use to cut and remove a notch in a floor joist?

Accepted Answer

A)  a pair of side cutters or knife 
B)  a screwdriver 
C)  a wood chisel and saw 
D)  a tenon saw. 
A)  a pair of side cutters or knife 
B)  a screwdriver 
C)  a wood chisel and saw 
D)  a tenon saw.

Question 3

When PAT testing a 110 V electric drill we are testing the:

Accepted Answer

A)  efficiency of the drill 
B)  earth continuity of the drill 
C)  hammer action of the drill 
D)  insulation resistance of the drill. 
A)  efficiency of the drill 
B)  earth continuity of the drill 
C)  hammer action of the drill 
D)  insulation resistance of the drill.

Question 4

All electrical test probes and leads must comply with the standards set by the:

Accepted Answer

A)  BS EN 60898 
B)  BS 7671 
C)  HSE Guidance Note GS 38 
D)  IET Regulations Part 2. 
A)  BS EN 60898 
B)  BS 7671 
C)  HSE Guidance Note GS 38 
D)  IET Regulations Part 2.

A visual inspection of a new installation must be carried out:

Which hand tools would you use to cut and remove a notch in a floor joist?

When PAT testing a 110 V electric drill we are testing the:

All electrical test probes and leads must comply with the standards set by the:

Health and Safety in Building Services Engineering

Understand the Fundamental Principles and Requirements of Environmental Technology Systems

Principles of Electrical Science

Electrical Installations: Inspection, Testing and Commissioning

Filters

Exam 4: Electrical Installations: Fault Diagnosis and Rectiﬁ Cation

A visual inspection of a new installation must be carried out:

Which hand tools would you use to cut and remove a notch in a floor joist?

When PAT testing a 110 V electric drill we are testing the:

All electrical test probes and leads must comply with the standards set by the:

Health and Safety in Building Services Engineering

Understand the Fundamental Principles and Requirements of Environmental Technology Systems

Principles of Electrical Science

Electrical Installations: Inspection, Testing and Commissioning

Filters