Question 1

A SCSI daisy-chain should be terminated on one end for proper operation.

Accepted Answer

A) True 
 B)False  False

Question 2

USB 2.0 ports run at a top speed of ______ per second.

Accepted Answer

A)  256 kilobytes 
B)  248 megabits 
C)  480 megabits 
D)  896 megabits 
A)  256 kilobytes 
B)  248 megabits 
C)  480 megabits 
D)  896 megabits C

Question 3

Microphones plug into the ______ on a sound card or integrated motherboard audio.

Accepted Answer

A)  MIDI Port 
B)  1/3-inch audio mini jack 
C)  1/4-inch audio mini jack 
D)  1/8-inch audio mini jack 
A)  MIDI Port 
B)  1/3-inch audio mini jack 
C)  1/4-inch audio mini jack 
D)  1/8-inch audio mini jack D

Question 4

Systems with USB 2.0 ports provide backward-compatibility with USB 1.1 devices and speeds.

Accepted Answer

A) True 
 B)False

Question 5

The maximum length for a USB cable attached to 12Mbps or 480Mbps device is ______ meter(s).

Accepted Answer

A)  1 meter 
B)  3 meters 
C)  5 meters 
D)  10 meters 
A)  1 meter 
B)  3 meters 
C)  5 meters 
D)  10 meters

Question 6

If two SCSI devices contain the same device ID number, the devices will not interfere with each other.

Accepted Answer

A) True 
 B)False

Question 7

Matching
-Daisy-chaining

Accepted Answer

A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers. 
A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers.

Question 8

The mouse is considered the primary method used for sending commands to the computer and entering data.

Accepted Answer

A) True 
 B)False

Question 9

The parallel port allows for only parallel printers to be attached.

Accepted Answer

A) True 
 B)False

Question 10

Matching
-KVM switch

Accepted Answer

A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers. 
A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers.

Question 11

Which of the following types of monitors incorporate touch-screen technology?

Accepted Answer

A)  LCoS 
B)  DLP 
C)  LCD 
D)  CRT 
A)  LCoS 
B)  DLP 
C)  LCD 
D)  CRT

Question 12

USB 1.1 ports run at a top speed of ______ per second.

Accepted Answer

A)  56 kilobytes 
B)  6 megabits 
C)  12 megabits 
D)  36 megabits 
A)  56 kilobytes 
B)  6 megabits 
C)  12 megabits 
D)  36 megabits

Question 13

A single IEEE-1394 port can daisy-chain up to ______ devices.

Accepted Answer

A)  8 
B)  16 
C)  24 
D)  36 
A)  8 
B)  16 
C)  24 
D)  36

Question 14

IEEE 1394 refers to a USB port.

Accepted Answer

A) True 
 B)False

Question 15

All the following reasons would cause an external SCSI device to not be available except ________?

Accepted Answer

A)  Device not powered on when the system was turned on 
B)  Excess cable length or excessive daisy-chain length 
C)  Undersized cable length 
D)  Incorrect or no termination 
A)  Device not powered on when the system was turned on 
B)  Excess cable length or excessive daisy-chain length 
C)  Undersized cable length 
D)  Incorrect or no termination

Question 16

Each SCSI device must carry a unique device ID to distinguish itself from others on the same channel.

Accepted Answer

A) True 
 B)False

Question 17

Matching
-Parallel port

Accepted Answer

A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers. 
A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers.

Question 18

Matching
-IEEE 1394

Accepted Answer

A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers. 
A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers.

Question 19

Matching
-PS/2

Accepted Answer

A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers. 
A)  A new universal standard that has largely replaced PS/2 connector, serial ports, and parallel ports on newer systems. 
B)  A set of standards for connecting and transferring data to hard disk, tape drives, hard drives, and optical drives. These devices also come with different interfaces that include narrow and wide. 
C)  A communication interface that transfers data in or out one bit at a time. 
D)  A communication interface that enables 8 bits sending or multiples of 8 in a single operation. 
E)  A serial bus communication interface that uses a high-speed connection.
F) A common connector that uses a 6-pin din for connecting keyboards and mice.
G) The connecting of multiple devices through a single port.
H) Distributes both USB signals and power via the USB bus to other devices.
I) Has its own power source; it plugs in to an AC wall outlet.
J) Device that enables a single keyboard, video display, and mouse to work with two or more computers.

Question 20

Which of the following are the two types of USB ports found on recent systems?

Accepted Answer

A)  USB 1.1 
B)  USB 1.5 
C)  USB 2.0 
D)  USB 3.0 
A)  USB 1.1 
B)  USB 1.5 
C)  USB 2.0 
D)  USB 3.0

A SCSI daisy-chain should be terminated on one end for proper operation.

USB 2.0 ports run at a top speed of ______ per second.

Microphones plug into the ______ on a sound card or integrated motherboard audio.

Systems with USB 2.0 ports provide backward-compatibility with USB 1.1 devices and speeds.

The maximum length for a USB cable attached to 12Mbps or 480Mbps device is ______ meter(s).

If two SCSI devices contain the same device ID number, the devices will not interfere with each other.

Matching -Daisy-chaining

The mouse is considered the primary method used for sending commands to the computer and entering data.

The parallel port allows for only parallel printers to be attached.

Matching -KVM switch

Which of the following types of monitors incorporate touch-screen technology?

USB 1.1 ports run at a top speed of ______ per second.

A single IEEE-1394 port can daisy-chain up to ______ devices.

IEEE 1394 refers to a USB port.

All the following reasons would cause an external SCSI device to not be available except ________?

Each SCSI device must carry a unique device ID to distinguish itself from others on the same channel.

Matching -Parallel port

Matching -IEEE 1394

Matching -PS/2

Which of the following are the two types of USB ports found on recent systems?

Technician Essentials and PC Anatomy

Motherboards and Processors

BIOS

Power Supplies and System Cooling

Ram

Video Displays and Video Cards

Customized PCs and Multimedia Devices

Laptop and Notebook Computers

Mobile Devices

Printers

Storage Devices

Installing and Upgrading Windows

Using and Managing Windows

Troubleshooting and Maintaining Windows

Networking

Security

Operational Procedures and Communications Methods

Filters

Exam 6: I/O and Input Ports and Devices

A SCSI daisy-chain should be terminated on one end for proper operation.

USB 2.0 ports run at a top speed of ______ per second.

Microphones plug into the ______ on a sound card or integrated motherboard audio.

Systems with USB 2.0 ports provide backward-compatibility with USB 1.1 devices and speeds.

The maximum length for a USB cable attached to 12Mbps or 480Mbps device is ______ meter(s).

If two SCSI devices contain the same device ID number, the devices will not interfere with each other.

Matching -Daisy-chaining

The mouse is considered the primary method used for sending commands to the computer and entering data.

The parallel port allows for only parallel printers to be attached.

Matching -KVM switch

Which of the following types of monitors incorporate touch-screen technology?

USB 1.1 ports run at a top speed of ______ per second.

A single IEEE-1394 port can daisy-chain up to ______ devices.

IEEE 1394 refers to a USB port.

All the following reasons would cause an external SCSI device to not be available except ________?

Each SCSI device must carry a unique device ID to distinguish itself from others on the same channel.

Matching -Parallel port

Matching -IEEE 1394

Matching -PS/2

Which of the following are the two types of USB ports found on recent systems?

Technician Essentials and PC Anatomy

Motherboards and Processors

BIOS

Power Supplies and System Cooling

Ram

Video Displays and Video Cards

Customized PCs and Multimedia Devices

Laptop and Notebook Computers

Mobile Devices

Printers

Storage Devices

Installing and Upgrading Windows

Using and Managing Windows

Troubleshooting and Maintaining Windows

Networking

Security

Operational Procedures and Communications Methods

Filters