Question 1

DHCP is used to reduce the amount of time required to manage IP addresses for devices on the network.

Accepted Answer

A) True 
 B)False  True

Question 2

A class B address has ________ networks and ________ hosts.

Accepted Answer

16,384; 68,532

Question 3

IP addressing refers to the ________ octet address used to define each end point.

Accepted Answer

A)  10 
B)  8 
C)  4 
D)  1 for class A, 2 for class B, and 4 for Class C 
E)  None of the above 
A)  10 
B)  8 
C)  4 
D)  1 for class A, 2 for class B, and 4 for Class C 
E)  None of the above C

Question 4

The term static routing refers to:

Accepted Answer

A)  Assigning a static route between two device interfaces. 
B)  All traffic traveling between the devices use the static route. 
C)  The device does not need to look up or determine which route is best. It automatically sends traffic destined for the end device out the static routes interface. 
D)  All of the above 
E)  None of the above 
A)  Assigning a static route between two device interfaces. 
B)  All traffic traveling between the devices use the static route. 
C)  The device does not need to look up or determine which route is best. It automatically sends traffic destined for the end device out the static routes interface. 
D)  All of the above 
E)  None of the above

Question 5

A term used to describe the process of segmenting the address space in order to increase the number of possible host addresses is ________.

Accepted Answer

A)  Subcalculating 
B)  Segmenting 
C)  Subnetting 
D)  Cidr 
E)  Classless 
A)  Subcalculating 
B)  Segmenting 
C)  Subnetting 
D)  Cidr 
E)  Classless

Question 6

Classless addressing refers to IPv4 address method that eliminates the need to segment the address into classes.

Accepted Answer

A) True 
 B)False

Question 7

Dynamic routing only occurs when the working path fails.

Accepted Answer

A) True 
 B)False

Question 8

All of the following factors impact the time required to reroute traffic using layer 3 routing except the:

Accepted Answer

A)  Type of protocol being used 
B)  Number of redundant circuits 
C)  TCP port number allocation 
D)  Number of new hops the traffic has to travel through on the new routeF) None of the above 
E)  Load on the router
F)None of the above 
A)  Type of protocol being used 
B)  Number of redundant circuits 
C)  TCP port number allocation 
D)  Number of new hops the traffic has to travel through on the new routeF) None of the above 
E)  Load on the router
F)None of the above

Question 9

________ is used to translate the IP address into an easy to understand URL address.

Accepted Answer

A)  Digital Interpretation Protocol 
B)  UDP port numbers 
C)  ARP 
D)  DNS 
E)  Both c and d
F) All of the above
G) None of the above 
A)  Digital Interpretation Protocol 
B)  UDP port numbers 
C)  ARP 
D)  DNS 
E)  Both c and d
F) All of the above
G) None of the above

Question 10

A(n) ________ server is a computing device with software that allows it to receive and forward mail requests.

Accepted Answer

The answer of A(n) ________ server is a computing device...

Question 11

IPv6 was introduced with the sole purpose of:

Accepted Answer

A)  Eliminate the need for DNS functionality. 
B)  Eliminate the need for DHCP 
C)  Provide sufficient IP address space. 
D)  None of the above 
E)  All of the above 
A)  Eliminate the need for DNS functionality. 
B)  Eliminate the need for DHCP 
C)  Provide sufficient IP address space. 
D)  None of the above 
E)  All of the above

Question 12

Routing across a LAN on an internal private network requires public IP address space.

Accepted Answer

A) True 
 B)False

Question 13

A class C address has ________ networks and ________ hosts.

Accepted Answer

The answer of A class C address has ________ networks...

Question 14

The goal of CIDR is to:

Accepted Answer

A)  Utilize the IP address space more efficiently. 
B)  Reduce the table conversions between routing devices. 
C)  Simplify routing across the Internet. 
D)  All of the above 
E)  None of the above 
A)  Utilize the IP address space more efficiently. 
B)  Reduce the table conversions between routing devices. 
C)  Simplify routing across the Internet. 
D)  All of the above 
E)  None of the above

Question 15

Classful routing refers to a 5 tier addressing methodology used to differentiate networks and hosts.

Accepted Answer

A) True 
 B)False

Question 16

Each routing protocol uses routing algorithms to determine the best route to choose. The two primary methods for calculating the path are link state and split horizon.

Accepted Answer

A) True 
 B)False

Question 17

One important function of a dynamic routing protocol is to save the server's processing power.

Accepted Answer

A) True 
 B)False

Question 18

The term IP routing refers to routing ________ across a network using the IP protocol.

Accepted Answer

The answer of The term IP routing refers to routing...

Question 19

A class A address has ________ networks and ________ hosts.

Accepted Answer

The answer of A class A address has ________ networks...

Question 20

The structure of the IPv4 IP address is defined as a Network and Host. The number of networks and hosts can be calculated by identifying the address as a class ________, ________, ________, ________.

Accepted Answer

The answer of The structure of the IPv4 IP address...

Exam 12: IP Routing Fundamentals

DHCP is used to reduce the amount of time required to manage IP addresses for devices on the network.

A class B address has ________ networks and ________ hosts.

IP addressing refers to the ________ octet address used to define each end point.

The term static routing refers to:

A term used to describe the process of segmenting the address space in order to increase the number of possible host addresses is ________.

Classless addressing refers to IPv4 address method that eliminates the need to segment the address into classes.

Dynamic routing only occurs when the working path fails.

All of the following factors impact the time required to reroute traffic using layer 3 routing except the:

________ is used to translate the IP address into an easy to understand URL address.

A(n) ________ server is a computing device with software that allows it to receive and forward mail requests.

IPv6 was introduced with the sole purpose of:

Routing across a LAN on an internal private network requires public IP address space.

A class C address has ________ networks and ________ hosts.

The goal of CIDR is to:

Classful routing refers to a 5 tier addressing methodology used to differentiate networks and hosts.

Each routing protocol uses routing algorithms to determine the best route to choose. The two primary methods for calculating the path are link state and split horizon.

One important function of a dynamic routing protocol is to save the server's processing power.

The term IP routing refers to routing ________ across a network using the IP protocol.

A class A address has ________ networks and ________ hosts.

The structure of the IPv4 IP address is defined as a Network and Host. The number of networks and hosts can be calculated by identifying the address as a class ________, ________, ________, ________.

The Basics - Sound, Electrical Signal, Electromagnetic Spectrum

The Telephone and the Telephone Line

Connecting the Dots - Transporting Information Across the Superhighway

Manipulating Information for Transmission

Osi Model - Relationship to Networking

Layer 3/4 Networking/ Transport Protocols

Layer 2 Networking Protocols

Layer 1 Networking Protocols

Digital Circuit Switch

Signaling

Distributed Switching Architecture - Voice Over IP

Transmission Medium

OSP -Outside Plant Infrastructure

Core Network

Metropolitan Network

Access Network & LAN

Pstn Central Office

Pstn Network Topology

Customer Premises

Catv Caple Television As a Telecommunication Service Provider

Catv Networking Topology

The Cellulare/PCS Telephone Network

Wireless Broadband Providers

Residential Services

Business Services

The Internet

Emerging Technologies

Filters

A class B address has networks and hosts.

A class C address has networks and hosts.

A class A address has networks and hosts.

The structure of the IPv4 IP address is defined as a Network and Host. The number of networks and hosts can be calculated by identifying the address as a class , , , .