Question 1

a network transport protocol that uses CSMA/CD communications

Accepted Answer

A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet 
A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet

Question 2

Which of the following is true of Ethernet?

Accepted Answer

A)  uses CSMA/CA 
B)  usually implemented in a ring topology 
C)  defined by the 802.11 standard 
D)  Fast Ethernet is 100 Mbps 
A)  uses CSMA/CA 
B)  usually implemented in a ring topology 
C)  defined by the 802.11 standard 
D)  Fast Ethernet is 100 Mbps

Question 3

Why do you need to configure a default gateway in a computer's IP configuration?

Accepted Answer

A default gateway is the address of a de

Question 4

a main connecting link or highway between networks,such as between floors in a building or between buildings

Accepted Answer

A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet 
A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet

Question 5

List three functions performed by TCP.

Accepted Answer

Establishes the communication session be

Question 6

Briefly describe a network.

Accepted Answer

A network is a system of compu

Question 7

What is the purpose of protocol binding?

Accepted Answer

Binding the protocol enables t

Question 8

You need to connect two groups of about 20 computer each that are located on different floors of a building. Which media type will work best for this scenario?

Accepted Answer

A)  coax 
B)  UTP 
C)  fiber-optic 
D)  HFC 
A)  coax 
B)  UTP 
C)  fiber-optic 
D)  HFC

Question 9

Which protocol enables routers to build tables of routing information?

Accepted Answer

A)  SMTP 
B)  RIP 
C)  TCP 
D)  PPP 
A)  SMTP 
B)  RIP 
C)  TCP 
D)  PPP

Question 10

a data unit sent over a network that contains source and destination,control,and error-detection information,as well as the data

Accepted Answer

A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet 
A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet

Question 11

Aside from TCP and IP,list three protocols used in the TCP/IP suite of protocols and a brief explanation of their purpose.

Accepted Answer

Routing Information Protocol (RIP)- Enab

Question 12

a transmission method in which a server divides recipients of an application,
such as a multimedia application,into groups

Accepted Answer

A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet 
A) binding 
B) bridge 
C) terminal 
D) backbone 
E) payload
F)frame
G)CIDR
H)multicast
I)APIPA
J)Ethernet

Question 13

Describe the difference between a LAN and a WAN.

Accepted Answer

A local area network (LAN)is one in whic

Question 14

Which of the following is true of IPv6 addresses?

Accepted Answer

A)  they are 128 bits in length 
B)  Windows Server 2008 does not support them 
C)  IPv6 follows IPv5 which used 48-bit addresses 
D)  they cannot be used for voice and video applications 
A)  they are 128 bits in length 
B)  Windows Server 2008 does not support them 
C)  IPv6 follows IPv5 which used 48-bit addresses 
D)  they cannot be used for voice and video applications

Question 15

Which of the following accurately describes a function of a LAN?

Accepted Answer

A)  offers networking services over a long distance 
B)  connects office networks in two different cities 
C)  uses a modem to connect to an ISP 
D)  uses switches to connect computers 
A)  offers networking services over a long distance 
B)  connects office networks in two different cities 
C)  uses a modem to connect to an ISP 
D)  uses switches to connect computers

Question 16

The transmission control method used by Ethernet is called collision sense multiple access with carrier detection (CSMA/CD)..

Accepted Answer

A) True 
 B)False

Question 17

You are troubleshooting a problem with a network that is composed of several subnets connected by routers. You have determined that the problem lies with the packet routing function. Which of the following is most responsible for this function?

Accepted Answer

A)  TCP 
B)  FTP 
C)  IP 
D)  SMTP 
A)  TCP 
B)  FTP 
C)  IP 
D)  SMTP

Question 18

A large file is broken into hundreds of small data units called packets and each data unit is transmitted across the network.

Accepted Answer

A) True 
 B)False

Question 19

You have a server on your network that your users frequently access. You don't want the server's address to change. What type of addressing method should you use?

Accepted Answer

A)  APIPA 
B)  static 
C)  DHCP 
D)  unicast 
A)  APIPA 
B)  static 
C)  DHCP 
D)  unicast

Question 20

A client OS coordinates network activities,authenticates users to access the network and enables workstations to access shared network resources.

Accepted Answer

A) True 
 B)False

a network transport protocol that uses CSMA/CD communications

Which of the following is true of Ethernet?

Why do you need to configure a default gateway in a computer's IP configuration?

a main connecting link or highway between networks,such as between floors in a building or between buildings

List three functions performed by TCP.

Briefly describe a network.

What is the purpose of protocol binding?

You need to connect two groups of about 20 computer each that are located on different floors of a building. Which media type will work best for this scenario?

Which protocol enables routers to build tables of routing information?

a data unit sent over a network that contains source and destination,control,and error-detection information,as well as the data

Aside from TCP and IP,list three protocols used in the TCP/IP suite of protocols and a brief explanation of their purpose.

a transmission method in which a server divides recipients of an application, such as a multimedia application,into groups

Describe the difference between a LAN and a WAN.

Which of the following is true of IPv6 addresses?

Which of the following accurately describes a function of a LAN?

The transmission control method used by Ethernet is called collision sense multiple access with carrier detection (CSMA/CD)..

You are troubleshooting a problem with a network that is composed of several subnets connected by routers. You have determined that the problem lies with the packet routing function. Which of the following is most responsible for this function?

A large file is broken into hundreds of small data units called packets and each data unit is transmitted across the network.

You have a server on your network that your users frequently access. You don't want the server's address to change. What type of addressing method should you use?

A client OS coordinates network activities,authenticates users to access the network and enables workstations to access shared network resources.

Operating System Theory

Popular Operating Systems

Operating System Hardware Components

File Systems

Installing and Upgrading Operating Systems

Configuring Input and Output Devices

Using and Configuring Storage Devices

Modem and Other Remote Communications Devices

Resource Sharing Over a Network

Standard Operating and Maintenance Proceedures

Filters

Exam 9: Network Connectivity

a network transport protocol that uses CSMA/CD communications

Which of the following is true of Ethernet?

Why do you need to configure a default gateway in a computer's IP configuration?

a main connecting link or highway between networks,such as between floors in a building or between buildings

List three functions performed by TCP.

Briefly describe a network.

What is the purpose of protocol binding?

You need to connect two groups of about 20 computer each that are located on different floors of a building. Which media type will work best for this scenario?

Which protocol enables routers to build tables of routing information?

a data unit sent over a network that contains source and destination,control,and error-detection information,as well as the data

Aside from TCP and IP,list three protocols used in the TCP/IP suite of protocols and a brief explanation of their purpose.

a transmission method in which a server divides recipients of an application, such as a multimedia application,into groups

Describe the difference between a LAN and a WAN.

Which of the following is true of IPv6 addresses?

Which of the following accurately describes a function of a LAN?

The transmission control method used by Ethernet is called collision sense multiple access with carrier detection (CSMA/CD)..

You are troubleshooting a problem with a network that is composed of several subnets connected by routers. You have determined that the problem lies with the packet routing function. Which of the following is most responsible for this function?

A large file is broken into hundreds of small data units called packets and each data unit is transmitted across the network.

You have a server on your network that your users frequently access. You don't want the server's address to change. What type of addressing method should you use?

A client OS coordinates network activities,authenticates users to access the network and enables workstations to access shared network resources.

Operating System Theory

Popular Operating Systems

Operating System Hardware Components

File Systems

Installing and Upgrading Operating Systems

Configuring Input and Output Devices

Using and Configuring Storage Devices

Modem and Other Remote Communications Devices

Resource Sharing Over a Network

Standard Operating and Maintenance Proceedures

Filters