Exam 20: Nonlinear Op-Amp Circuit Applications Key
Exam 1: Introduction38 Questions
Exam 2: Semoconductors50 Questions
Exam 3: Diode Theory Key50 Questions
Exam 4: Diode Circuits48 Questions
Exam 5: Special-Purpose Diodes Key50 Questions
Exam 6: BJT Fumdamentals50 Questions
Exam 7: BJT Biasing50 Questions
Exam 7: Basic BJT Amplifiers52 Questions
Exam 9: Multistage,CC,and CB Amplifiers50 Questions
Exam 10: Power Amplifiers48 Questions
Exam 11: JFETS50 Questions
Exam 12: Mosfets46 Questions
Exam 13: Thyristors50 Questions
Exam 14: Frequency Effects50 Questions
Exam 15: Differential Amplifiers50 Questions
Exam 16: Operational Amplifiers50 Questions
Exam 17: Negative Feedback49 Questions
Exam 18: Linear OP AMP Circuits50 Questions
Exam 19: Active Filters Key50 Questions
Exam 20: Nonlinear Op-Amp Circuit Applications Key50 Questions
Exam 21: Oscillators Key50 Questions
Exam 22: Regulated Power Supplies Key49 Questions
Select questions type
False triggering of a Schmitt trigger caused by noise is prevented by
Free
(Multiple Choice)
4.8/5
(34)
Correct Answer:
B
In order for a transistor output stage that is used with an IC comparator to work properly,an open collector must be connected to
Free
(Multiple Choice)
4.8/5
(35)
Correct Answer:
A
A comparator circuit that detects when the input voltage is between two limits is called
Free
(Multiple Choice)
4.9/5
(40)
Correct Answer:
C
A circuit that adds a dc component to the input signal and has an output which is the same size and shape as the input,except for the dc shift is the
(Multiple Choice)
4.8/5
(39)
A comparator whose positive output indicates that the input voltage exceeds a specific limit is referred to as
(Multiple Choice)
4.8/5
(31)
What can be done to alleviate speed limitations such as the slew-rate when using an op amp as a comparator?
(Multiple Choice)
5.0/5
(36)
A comparator has two input voltages and one output voltage which is either a low or a high voltage.
(True/False)
4.7/5
(38)
Linear circuits include comparators,waveshapers,and active diode circuits.
(True/False)
4.8/5
(38)
Some of the more sophisticated Class D amps use a MOSFET H-bridge circuit for the switching devices an can attain efficiencies upwards from
(Multiple Choice)
4.8/5
(33)
What will reduce the effect of a diode's knee voltage and enable the diode circuit to rectify,clip,and clamp signals with amplitudes less than the knee voltage?
(Multiple Choice)
4.9/5
(34)
Any kind of unwanted signal that is not derived from or harmonically related to the input signal is referred to as ________.
(Multiple Choice)
4.7/5
(40)
If the output swing of a zero-crossing detector is too large for an application,back-to-back zener diodes can be used and the output will be bounded.
(True/False)
4.8/5
(32)
The trip point of a comparator is located in the center of the linear region.
(True/False)
4.9/5
(31)
In order for an integrator to work properly,the closed-loop time constant should be how many times greater than the width of the input pulse?
(Multiple Choice)
5.0/5
(39)
Some optimized comparators have diode clamps built into input stages in order to protect sensitive circuits.
(True/False)
4.7/5
(36)
Hysteresis is desirable in a Schmitt trigger because it prevents noise from causing false triggering.
(True/False)
4.8/5
(28)
Showing 1 - 20 of 50
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)