Question 1

Which of the following are common ways to protect video while using a wireless network? (Choose two)

Accepted Answer

A)  VPN 
B)  WPA2 
C)  IEEE 802.1x 
D)  IEEE802.11N 
E)  HTTPS

Question 2

Who should be responsible for documenting a video surveillance installation?

Accepted Answer

A)  The camera manufacturer 
B)  The customer's security manager 
C)  The customer's IT department 
D)  The integrator

Question 3

An installer needs a camera to monitor a hallway in an office complex. The hallway is 2.5 m (8 ft 2 in) wide. The customer wants to be able to identify people (80 pixels per face). What is the minimum resolution needed to meet this requirement?

Accepted Answer

A)  1024x768 
B)  1280x720 
C)  1920x1024 
D)  800 x 600

Question 4

When would the most noticeable difference between progressive scan and interlaced video be apparent?

Accepted Answer

A)  Viewing frame-by-frame recorded video of moving vehicles 
B)  Viewing frame-by-frame recorded video of an empty field 
C)  During live viewing of a football game 
D)  During live viewing of an office lobby, after work hours

Question 5

If a camera is pointed down a hallway with no windows and the color seems "washed out" or faded, which of the following settings should first be adjusted to improve the image?

Accepted Answer

A)  Decrease image brightness 
B)  Increase image contrast 
C)  Uncheck backlight compensation 
D)  Adjust the exposure settings

Question 6

What is 3D privacy masking?

Accepted Answer

A)  A privacy mask with three dimensions 
B)  A privacy mask that is changing its shape depending on angle of view 
C)  A privacy mask that contains three individual set of blobs 
D)  A privacy mask that remains in the field of view

Question 7

Which of the following are outdoor rated products? (Choose two)

Accepted Answer

A)  AXIS M3114-R 
B)  AXIS P3304-VR 
C)  AXIS P1344-E 
D)  AXIS P3344-VE 
E)  AXIS M1031-W

Question 8

IP51 and IP52 means that the camera

Accepted Answer

A)  Can be placed in or outdoors. 
B)  Is resistant to dust and dripping water. 
C)  Is vandal resistant. 
D)  Is designed for tough environments.

Question 9

Looking at the picture below, which setting would best address the blurring that's occurring with faster moving objects?

Accepted Answer

A)  Increase image brightness 
B)  Adjust the exposure settings 
C)  Uncheck backlight compensation 
D)  Increase image contrast

Question 10

A customer asks for a fixed mini dome with a DC-iris lens. 2.8-10 mm varifocal lens and wide dynamic range. Which of the following cameras is the only choice to fit all of the requirements?

Accepted Answer

A)  AXIS P3301 
B)  AXIS M3203 
C)  AXIS Q1604 
D)  AXIS M5014

Question 11

When using HTTPS on Axis products, true security is implemented after the

Accepted Answer

A)  64 character password is in place. 
B)  256 character password is in place. 
C)  MAC address filtering is activated. 
D)  Signed certificate is installed.

Question 12

While setting up an AXIS Q7404 Video Encoder for control of an analog PTZ using Pelco D protocol, you run into a problem. After uploading of the proper Pelco drivers into the AXIS Q7404 Video Encoder you find that channel 1 is controlling the wrong analog PTZ. Which option below would you adjust to fix this problem so you can avoid changing physical cables?

Accepted Answer

A)  IP address 
B)  Device ID 
C)  Baud rate 
D)  Device type

Question 13

In order to comply with SMPTE standards of HDTV, the camera must meet the following:

Accepted Answer

A)  Light sensitivity, aspect ratio, resolution, color fidelity 
B)  Aspect ratio, resolution, light sensitivity, frame rate 
C)  Light sensitivity, color fidelity, frame rate, aspect ratio 
D)  Frame rate, aspect ratio, resolution, color fidelity

Question 14

What are the effects of changing the capture mode on an AXIS P1346 from 2048x1536 (3 MP) to 1920x1080 (HDTV)? (Choose two)

Accepted Answer

A)  Minimum illumination decreases 
B)  Vertical angle of view decreases 
C)  Maximum frame rate decreases 
D)  Maximum frame rate increases 
E)  Motion blur increases

Question 15

What is the appropriate usage for an Axis thermal camera?

Accepted Answer

A)  Identifying people in complete darkness 
B)  Detecting motion only at nighttime 
C)  Measuring exact temperatures in daytime 
D)  Detecting activity in daylight and complete darkness

Question 16

To get the best accuracy for a people counting application for customers entering a store, the camera should be mounted

Accepted Answer

A)  Facing the entrance. 
B)  Facing the entrance at eye level. 
C)  Directly above the entrance. 
D)  Facing away from the entrance.

Question 17

What is the main purpose of the Arctic Temperature Control functionality?

Accepted Answer

A)  To protect the camera electronics 
B)  To protect the camera mechanics 
C)  To protect the camera lens 
D)  To protect the camera power

Question 18

In an Ethernet network, broadcast traffic is received and processed by

Accepted Answer

A)  All devices on the network, making it unsuitable for network video since the network load would be unacceptable. 
B)  All devices on the network, making it suitable for network video since any device can access the video without any overhead from establishing a separate connection to the server. 
C)  Only those devices that have registered with the server to receive the traffic, making it unsuitable for network video, due to the overhead from establishing a separate connection to the server. 
D)  Only those devices that have registered with the server to receive the traffic, making it suitable for network video since the network load would be kept reasonable.

Question 19

When using Axis' Corridor Format

Accepted Answer

A)  The depth of field is automatically adjusted to keep the entire length of a corridor in focus. 
B)  The image is rotated 90 degrees, changing the aspect ratio to 9:16. 
C)  Axis PTZ cameras can automatically track people walking down a corridor. 
D)  Privacy masks block out areas outside the specified corridor width.

Question 20

Incorrect colors due to faulty calibration or configuration may result in

Accepted Answer

A)  False representation of video footage. 
B)  Limiting the possibility of sufficient pixel density for facial recognition. 
C)  Increasing bandwidth due to high levels of noise. 
D)  The camera automatically switching to black and white mode.

Exam 1: Axis Network Video