Question 1

In a dark indoor environment one single Axis illuminator is available. At a distance of 1 m (3 ft 3 in) away from the illuminator the light intensity is 1024 lux. At what distance from the light source will the light intensity be 256 lux?

Accepted Answer

A)  2 m (6 ft 7 in) 
B)  4m{13 ft 1 in) 
C)  8 m (26 ft 3 in) 
D)  16 m (52 ft 6 in)

Question 2

Ghost image is when

Accepted Answer

A)  The lens is using too high f-stop value. 
B)  The shutter time is too long. 
C)  The gain is too high. 
D)  The frame rate is too low.

Question 3

The Axis pixel counter allows a user to

Accepted Answer

A)  Convert pixels to actual distances. 
B)  Verify that the resolution requirements for a scene are met. 
C)  Determine the file size for each video frame. 
D)  Specify different exposure zones in a scene.

Question 4

Which API is used to ensure interoperability between products from different vendors?

Accepted Answer

A)  ONVIF 
B)  VAPIX® 
C)  AVHS 
D)  HDTV

Question 5

In a network surveillance installation, the purpose of a router is to

Accepted Answer

A)  Forward the video stream between networks. 
B)  Forward the video stream to the correct receiver within a network. 
C)  Separate audio and video traffic to reduce audio latency. 
D)  Separate the video stream from the camera control signaling.

Question 6

What is one of the main purposes of using AXIS Camera Application Platform?

Accepted Answer

A)  Loading of applications directly to the SD/SDHC card on the camera 
B)  Loading a Video Management Software (VMS) to be run directly on the camera 
C)  Loading of applications to be run directly on the camera 
D)  Loading of VAPIX® applications directly on the camera

Question 7

Working with a retailer on a site survey, they ask if there's any way to get more of the aisle and less of the shelves on the short sides in the shot. An AXIS M3204 camera is being used. Which would be the best suggestion to the retailer?

Accepted Answer

A)  Adjusting the varifocal lens from 2.8 mm to 10 mm 
B)  Adjusting the varifocal lens from 2.8 mm to 4 mm 
C)  Using Axis' Corridor Format 
D)  Switching the camera to a 16:9 view

Question 8

In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:

Accepted Answer

A)  Downloading the correct Device ID from the Axis website 
B)  Setting the Baud Rate to match the analog PTZ' s 
C)  Setting the Device ID to match the analog ID 
D)  Uploading the correct PTZ driver

Question 9

An installer wants to be sure that the AXIS P3347 always delivers full frame rate (30 fps) even in darker conditions. Which of the following options should be used?

Accepted Answer

A)  Set priority to frame rate 
B)  Set maximum shutter time to 1/30 s 
C)  Set the capture mode to 3 megapixel 
D)  Set the Group of Video (GOV) length to 30

Question 10

A VPN

Accepted Answer

A)  Is required to enable viewing network surveillance video on mobile devices. 
B)  Is a network specially optimized to handle video data packets. 
C)  Creates a secure tunnel through the network, where your information travels encrypted. 
D)  Translates domain names to IP addresses, according to the IPv4 standard.

Question 11

The purpose of a router is to

Accepted Answer

A)  Forward traffic within a local network. 
B)  Forward traffic between different networks. 
C)  Manage server connections to a local network. 
D)  Establish encrypted connections between networks over the internet.

Question 12

Why is it recommended to make a list of the Axis network video product serial numbers in an installation?

Accepted Answer

A)  It provides an overview of what equipment has been used 
B)  The product name can be found inside the serial number 
C)  It make it is easier to identify the camera in AXIS Camera Management 
D)  It gives the status of the camera or encoder

Question 13

Using AXIS Camera Management, which of the following can be performed? (Choose two)

Accepted Answer

A)  Apply templates to devices 
B)  View recorded video 
C)  Upgrade firmware 
D)  Set motion detection windows 
E)  Configure crossline detection

Question 14

When installing a camera outdoors to an existing pole, what is the most important consideration?

Accepted Answer

A)  Availability of power 
B)  The material of the housing 
C)  The camera has to be ruggedized 
D)  Wide dynamic range

Question 15

When choosing a camera for extreme low temperature environments, how would Arctic Temperature Control ensure camera longevity?

Accepted Answer

A)  The product is always kept cold 
B)  The product can handle low ambient temperatures 
C)  The product is protected against extreme temperatures 
D)  The product performs a stepped start-up at low ambient temperature

Question 16

When zooming in on an object with varifocal or zoom lens, light sensitivity of the camera is

Accepted Answer

A)  increasing 
B)  decreasing 
C)  the same 
D)  dependent on lens

Question 17

After an installer sets up a motion detection window they then zoom out the camera. How will this affect the camera's ability to detect motion if no settings are changed?

Accepted Answer

A)  More pixels are needed to change to trigger motion detection 
B)  Less pixels are needed to change to trigger motion detection 
C)  More movement needed to change to trigger motion detection 
D)  Less movement needed to change to trigger motion detection

Question 18

A camera is positioned where backlighting is a problem. What would be the preferred action?

Accepted Answer

A)  Use a lens with a polarized filter 
B)  Axis P-iris technology will solve your problem 
C)  Increase the shutter speed to more than 1 /100 s 
D)  Add additional light sources to counter backlighting

Question 19

In what way does VAPIX ® help integrators?

Accepted Answer

A)  It offers a multi-language tutorial for implementation of analytics 
B)  It improves efficiency when implementing multi-camera tracking 
C)  It connects products to automatically upgrade products with the latest firmware 
D)  The openness helps integrate Axis products with other system components

Question 20

How does the AXIS Design Tool allow users to estimate the effects of scene complexity and motion on bandwidth and storage usage?

Accepted Answer

A)  AXIS Design Tool requires users to manually enter their own estimated bit rate for each camera 
B)  Users can view model scenario videos and select the scenario that best matches their scene 
C)  Users can upload recorded surveillance video to allow AXIS Design Tool to make estimates 
D)  AXIS Design Tool uses a statistical model based on selected camera model

Exam 1: Axis Network Video