Question 1

__________ preventative maintenance includes checking for water in the oil and verifying accumulator charge.

Accepted Answer

A)  Hydraulic system 
B)  Electrical system 
C)  Mechanical system 
D)  Pneumatic system 
A)  Hydraulic system 
B)  Electrical system 
C)  Mechanical system 
D)  Pneumatic system A

Question 2

Getting the robot clear of the crash is the ______ step of crash recovery.

Accepted Answer

A)  third 
B)  second 
C)  fourth 
D)  first 
A)  third 
B)  second 
C)  fourth 
D)  first B

Question 3

What are the five steps of crash recovery?

Accepted Answer

• First,determine why the robot crashed.• Second,get the robot clear of the crash or impact area.• Third,determine how to prevent another crash.• Fourth,check the alignment of all equipment involved in the crash.• Fifth,determine what to do with the parts involved in the crash.

Question 4

Determining how to prevent another crash is the _____ step in robot crash recovery.

Accepted Answer

A)  third 
B)  fourth 
C)  second 
D)  first 
A)  third 
B)  fourth 
C)  second 
D)  first

Question 5

__________ preventative maintenance includes changing batteries,changing the wiring harness,and tightening terminal connections.

Accepted Answer

A)  Pneumatic system 
B)  Mechanical system 
C)  Hydraulic system 
D)  Electrical system 
A)  Pneumatic system 
B)  Mechanical system 
C)  Hydraulic system 
D)  Electrical system

Question 6

What is the common recommended PPE for arc flash?

Accepted Answer

This kit out includes the following: • A

Question 7

When crash recovery is complete,which of the following would be the best course of action?

Accepted Answer

A)  Have the operator run the first cycle 
B)  Stay close for the first couple of cycles and pay attention to the robot's operation 
C)  Move to the next piece of equipment that needs repair because your job is done 
D)  None of these are correct 
A)  Have the operator run the first cycle 
B)  Stay close for the first couple of cycles and pay attention to the robot's operation 
C)  Move to the next piece of equipment that needs repair because your job is done 
D)  None of these are correct

Question 8

Tightening electrical connections,replacing filters,and changing out the hydraulic oil are all examples of ______ preventative maintenance tasks.

Accepted Answer

A)  annual 
B)  monthly 
C)  daily 
D)  quarterly 
A)  annual 
B)  monthly 
C)  daily 
D)  quarterly

Question 9

What are the five guidelines to keep in mind if the troubleshooting solution does not work?

Accepted Answer

Guideline 1: Do not get frustrated.Guide

Question 10

When deciding where to place parts,which of the following are considerations?

Accepted Answer

A)  Opening that parts could fall into 
B)  Areas where people are still working 
C)  Areas where parts could roll under the machine 
D)  All of these are correct 
A)  Opening that parts could fall into 
B)  Areas where people are still working 
C)  Areas where parts could roll under the machine 
D)  All of these are correct

Question 11

A(n) _________ is an electrical catastrophe where two main legs of a system short out and draw enough amperage to create an electrical explosion complete with pressure waves,shrapnel,vaporized metal,and enough heat to instantly cause second- and third-degree burns.

Accepted Answer

A)  singularity 
B)  common short 
C)  crash 
D)  arc flash 
A)  singularity 
B)  common short 
C)  crash 
D)  arc flash

Question 12

What are the benefits of taking pictures before you start a repair?

Accepted Answer

This will give you a visual roadmap back

Question 13

What are some of the things we do during the information gathering phase of troubleshooting?

Accepted Answer

As we figure out what is wrong with the

Question 14

What is troubleshooting and what are the main steps of the process?

Accepted Answer

Troubleshooting is the logical process o

Question 15

Using the ___________ results in nothing left to hold the axis or axes in place,which could result in injury if you are not careful.

Accepted Answer

A)  brake release switch 
B)  pause/hold button 
C)  E-stop 
D)  dead man switch 
A)  brake release switch 
B)  pause/hold button 
C)  E-stop 
D)  dead man switch

Question 16

After a robot crash,you notice that each of the five different programs you load and check has positional issues.The most likely explanation for this is _________.

Accepted Answer

A)  you are running the robot at too slow of a speed 
B)  the crash has altered the position of one of the robot's axes or the tooling 
C)  you did not start the robot in the home position 
D)  you have accidently picked old programs that have issues 
A)  you are running the robot at too slow of a speed 
B)  the crash has altered the position of one of the robot's axes or the tooling 
C)  you did not start the robot in the home position 
D)  you have accidently picked old programs that have issues

Question 17

__________ preventative maintenance includes filling the lubricator,verifying muffler operation,and draining the reservoir.

Accepted Answer

A)  Hydraulic system 
B)  Mechanical system 
C)  Pneumatic system 
D)  Electrical system 
A)  Hydraulic system 
B)  Mechanical system 
C)  Pneumatic system 
D)  Electrical system

Question 18

Determining why the robot crashed is the ____ step in crash recovery.

Accepted Answer

A)  first 
B)  third 
C)  second 
D)  fifth 
A)  first 
B)  third 
C)  second 
D)  fifth

Question 19

What is the number one guideline to remember when you have a troubleshooting failure?

Accepted Answer

A)  Eliminate the impossible to find the solution 
B)  Try again 
C)  Reevaluate the information 
D)  Do not get frustrated 
A)  Eliminate the impossible to find the solution 
B)  Try again 
C)  Reevaluate the information 
D)  Do not get frustrated

Question 20

What,if anything,have we learned if we made the process worst instead of better during the troubleshooting process?

Accepted Answer

A)  That what we worked on had nothing to do with the problem 
B)  Likely there are multiple failures 
C)  You are on the right track,but need to correct in the opposite direction 
D)  None of these are correct 
A)  That what we worked on had nothing to do with the problem 
B)  Likely there are multiple failures 
C)  You are on the right track,but need to correct in the opposite direction 
D)  None of these are correct

__________ preventative maintenance includes checking for water in the oil and verifying accumulator charge.

Getting the robot clear of the crash is the ______ step of crash recovery.

What are the five steps of crash recovery?

Determining how to prevent another crash is the _____ step in robot crash recovery.

__________ preventative maintenance includes changing batteries,changing the wiring harness,and tightening terminal connections.

What is the common recommended PPE for arc flash?

When crash recovery is complete,which of the following would be the best course of action?

Tightening electrical connections,replacing filters,and changing out the hydraulic oil are all examples of ______ preventative maintenance tasks.

What are the five guidelines to keep in mind if the troubleshooting solution does not work?

When deciding where to place parts,which of the following are considerations?

A(n) _________ is an electrical catastrophe where two main legs of a system short out and draw enough amperage to create an electrical explosion complete with pressure waves,shrapnel,vaporized metal,and enough heat to instantly cause second- and third-degree burns.

What are the benefits of taking pictures before you start a repair?

What are some of the things we do during the information gathering phase of troubleshooting?

What is troubleshooting and what are the main steps of the process?

Using the ___________ results in nothing left to hold the axis or axes in place,which could result in injury if you are not careful.

After a robot crash,you notice that each of the five different programs you load and check has positional issues.The most likely explanation for this is _________.

__________ preventative maintenance includes filling the lubricator,verifying muffler operation,and draining the reservoir.

Determining why the robot crashed is the ____ step in crash recovery.

What is the number one guideline to remember when you have a troubleshooting failure?

What,if anything,have we learned if we made the process worst instead of better during the troubleshooting process?

Safety

Introduction to Industrial Robotics

Components of the Robot

Classification of Robots

End-Of-Arm Tooling

Programming and File Management

Automation Sensors

Vision Systems

Integration and Networking

Programmable Logic Controllers Plcs and Human-Machine Interfaces Hmis

Justifying the Use of a Robot

Filters

Exam 11: Maintenance and Troubleshooting

__________ preventative maintenance includes checking for water in the oil and verifying accumulator charge.

Getting the robot clear of the crash is the ______ step of crash recovery.

What are the five steps of crash recovery?

Determining how to prevent another crash is the _____ step in robot crash recovery.

__________ preventative maintenance includes changing batteries,changing the wiring harness,and tightening terminal connections.

What is the common recommended PPE for arc flash?

When crash recovery is complete,which of the following would be the best course of action?

Tightening electrical connections,replacing filters,and changing out the hydraulic oil are all examples of ______ preventative maintenance tasks.

What are the five guidelines to keep in mind if the troubleshooting solution does not work?

When deciding where to place parts,which of the following are considerations?

A(n) _________ is an electrical catastrophe where two main legs of a system short out and draw enough amperage to create an electrical explosion complete with pressure waves,shrapnel,vaporized metal,and enough heat to instantly cause second- and third-degree burns.

What are the benefits of taking pictures before you start a repair?

What are some of the things we do during the information gathering phase of troubleshooting?

What is troubleshooting and what are the main steps of the process?

Using the ___________ results in nothing left to hold the axis or axes in place,which could result in injury if you are not careful.

After a robot crash,you notice that each of the five different programs you load and check has positional issues.The most likely explanation for this is _________.

__________ preventative maintenance includes filling the lubricator,verifying muffler operation,and draining the reservoir.

Determining why the robot crashed is the ____ step in crash recovery.

What is the number one guideline to remember when you have a troubleshooting failure?

What,if anything,have we learned if we made the process worst instead of better during the troubleshooting process?

Safety

Introduction to Industrial Robotics

Components of the Robot

Classification of Robots

End-Of-Arm Tooling

Programming and File Management

Automation Sensors

Vision Systems

Integration and Networking

Programmable Logic Controllers Plcs and Human-Machine Interfaces Hmis

Justifying the Use of a Robot

Filters