\[\text { Figure } 14 < 1\] -What is the secondary current in Figure 14-1 with a load resistor and 4: 1 turns ratio?

A) 600 mA B) 1.66 A C) 9.6 A D) 4.8 A A) 600 mA B) 1.66 A C) 9.6 A D) 4.8 A

\[\text { Figure } 14 S = 40 mA and the turns ratio equals 4:1 ?

A) 160 mA B) 4 mA C) 40 mA D) 10 mA A) 160 mA B) 4 mA C) 40 mA D) 10 mA

\[\text { Figure } 14 S is 240 mA ?

A) 9000 $\Omega$ B) 1500$\Omega$ C) 167$\Omega$ D) 500 $\Omega$ A) 9000 $\Omega$ B) 1500$\Omega$ C) 167$\Omega$ D) 500 $\Omega$

Exam 14: Time Response of Reactive Circuits

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?

(Multiple Choice)

4.8/5

(34)

Question 21

A step-up transformerW ill increase and decrease .

(Multiple Choice)

4.9/5

(33)

Question 22

WhichW indingW ill have the lowest measured resistance in a transformerW ith four secondary Windings?

(Multiple Choice)

4.9/5

(36)

Question 23

If a dc voltage is input to a transformerʹs primary, then an ac voltage is induced in its secondary.

(True/False)

4.9/5

(34)

Question 24

The small dot placed on schematics of transformers indicates:

(Multiple Choice)

4.9/5

(34)

Question 25

What is the likeliestW ay to fix a center-tapped transformerW hich outputs unequal voltages on each half of the secondary?

(Multiple Choice)

4.9/5

(33)

Question 26

When the turns ratio of a transformer is 1:10 and the primary AC voltage in 6 V, then the secondary voltage is ________.

(Multiple Choice)

4.8/5

(40)

Question 27

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?

(Multiple Choice)

4.7/5

(34)

Question 28

$\text { Figure } 14 < 1 -What is the secondary current in Figure 14-1 with a 50 load resistor and 4: 1 turns ratio?$ $\text { Figure } 14 < 1$ -What is the secondary current in Figure 14-1 with a 50 $\text { Figure } 14 < 1 -What is the secondary current in Figure 14-1 with a 50 load resistor and 4: 1 turns ratio?$ load resistor and 4: 1 turns ratio?

(Multiple Choice)

4.7/5

(27)

Question 29

For a transformer to operate properly, it must:

(Multiple Choice)

4.9/5

(46)

Question 30

Autotransformers cannot be used for isolation purposes since there is only one Winding.

(True/False)

4.7/5

(33)

Question 31

A matching transformer's primary needs______ more turns than its secondary to match a 600 $\Omega$ audio signal distribution line to an 8 $\Omega$ speaker.

(Multiple Choice)

4.8/5

(44)

Question 32

$\text { Figure } 14 < 1 -What is the primary current in Figure 14-1 if I<sub>S</sub> = 40 mA and the turns ratio equals 4:1 ?$ $\text { Figure } 14 < 1$ -What is the primary current in Figure 14-1 if I_S = 40 mA and the turns ratio equals 4:1 ?

(Multiple Choice)

4.9/5

(30)

Question 33

$\text { Figure } 14 < 1 -In Figure 14-1, if the secondary current is 50 mA, the primary current is .$ $\text { Figure } 14 < 1$ -In Figure 14-1, if the secondary current is 50 mA, the primary current is .

(Multiple Choice)

4.9/5

(38)

Question 34

A core material is not always necessary for proper operation of a transformer.

(True/False)

4.9/5

(27)

Question 35

Although the input voltage to the transformerʹs primary is correct, the transformer is outputting zero volts. A probable trouble is ________.

(Multiple Choice)

4.8/5

(28)

Question 36

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I<sub>S</sub> is 240 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I_S is 240 mA ?

(Multiple Choice)

4.8/5

(35)

Question 37

An ideal 10:1 transformer With 20 VA of power has less than 2 VA on the output.

(True/False)

4.8/5

(38)

Question 38

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?

(Multiple Choice)

5.0/5

(35)

Question 39

The phrase ʺMaximum power is delivered to the loadW hen the load resistance equals the source resistanceʺ is a definition of ________.

(Multiple Choice)

4.8/5

(38)

Question 40

Showing 21 - 40 of 65

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?

A step-up transformerW ill increase and decrease .

WhichW indingW ill have the lowest measured resistance in a transformerW ith four secondary Windings?

If a dc voltage is input to a transformerʹs primary, then an ac voltage is induced in its secondary.

The small dot placed on schematics of transformers indicates:

What is the likeliestW ay to fix a center-tapped transformerW hich outputs unequal voltages on each half of the secondary?

When the turns ratio of a transformer is 1:10 and the primary AC voltage in 6 V, then the secondary voltage is ________.

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?

For a transformer to operate properly, it must:

Autotransformers cannot be used for isolation purposes since there is only one Winding.

A matching transformer's primary needs______ more turns than its secondary to match a 600 $\Omega$ audio signal distribution line to an 8 $\Omega$ speaker.

$\text { Figure } 14 < 1 -What is the primary current in Figure 14-1 if I<sub>S</sub> = 40 mA and the turns ratio equals 4:1 ?$ $\text { Figure } 14 < 1$ -What is the primary current in Figure 14-1 if I_S = 40 mA and the turns ratio equals 4:1 ?

$\text { Figure } 14 < 1 -In Figure 14-1, if the secondary current is 50 mA, the primary current is .$ $\text { Figure } 14 < 1$ -In Figure 14-1, if the secondary current is 50 mA, the primary current is .

A core material is not always necessary for proper operation of a transformer.

Although the input voltage to the transformerʹs primary is correct, the transformer is outputting zero volts. A probable trouble is ________.

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I<sub>S</sub> is 240 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I_S is 240 mA ?

An ideal 10:1 transformer With 20 VA of power has less than 2 VA on the output.

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?

The phrase ʺMaximum power is delivered to the loadW hen the load resistance equals the source resistanceʺ is a definition of ________.

Quantities and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Parallel Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rc Circuits

Inductors

Rl Circuits

Rlc Circuits and Resonance

Transformers

Regulators, Filters, and Op-Amps

Understanding Transducers, Sensors, and Conversion in Industrial Processes

Filters

Exam 14: Time Response of Reactive Circuits

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?

A step-up transformerW ill increase ________ and decrease ________.

WhichW indingW ill have the lowest measured resistance in a transformerW ith four secondary Windings?

If a dc voltage is input to a transformerʹs primary, then an ac voltage is induced in its secondary.

The small dot placed on schematics of transformers indicates:

What is the likeliestW ay to fix a center-tapped transformerW hich outputs unequal voltages on each half of the secondary?

When the turns ratio of a transformer is 1:10 and the primary AC voltage in 6 V, then the secondary voltage is ________.

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the secondary current in Figure 14-1 with a 50 load resistor and 4: 1 turns ratio?

For a transformer to operate properly, it must:

Autotransformers cannot be used for isolation purposes since there is only one Winding.

A matching transformer's primary needs______ more turns than its secondary to match a 600 Ω\OmegaΩ audio signal distribution line to an 8 Ω\OmegaΩ speaker.

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the primary current in Figure 14-1 if IS = 40 mA and the turns ratio equals 4:1 ?

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -In Figure 14-1, if the secondary current is 50 mA, the primary current is ________.

A core material is not always necessary for proper operation of a transformer.

Although the input voltage to the transformerʹs primary is correct, the transformer is outputting zero volts. A probable trouble is ________.

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and IS is 240 mA ?

An ideal 10:1 transformer With 20 VA of power has less than 2 VA on the output.

Figure 14<1\text { Figure } 14 < 1 Figure 14<1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?

The phrase ʺMaximum power is delivered to the loadW hen the load resistance equals the source resistanceʺ is a definition of ________.

Quantities and Units

Voltage, Current, and Resistance

Ohms Law, Energy, and Power

Series Circuits

Parallel Circuits

Series-Parallel Circuits

Magnetism and Electromagnetism

Introduction to Alternating Current and Voltage

Capacitors

Rc Circuits

Inductors

Rl Circuits

Rlc Circuits and Resonance

Transformers

Regulators, Filters, and Op-Amps

Understanding Transducers, Sensors, and Conversion in Industrial Processes

Filters

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 9:1?

A step-up transformerW ill increase and decrease .

$\text { Figure } 14 < 1 -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?$ $\text { Figure } 14 < 1$ -What is the secondary voltage in Figure 14-1 if the turns ratio is 1: 3 ?

A matching transformer's primary needs______ more turns than its secondary to match a 600 $\Omega$ audio signal distribution line to an 8 $\Omega$ speaker.

$\text { Figure } 14 < 1 -What is the primary current in Figure 14-1 if I<sub>S</sub> = 40 mA and the turns ratio equals 4:1 ?$ $\text { Figure } 14 < 1$ -What is the primary current in Figure 14-1 if I_S = 40 mA and the turns ratio equals 4:1 ?

$\text { Figure } 14 < 1 -In Figure 14-1, if the secondary current is 50 mA, the primary current is .$ $\text { Figure } 14 < 1$ -In Figure 14-1, if the secondary current is 50 mA, the primary current is .

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I<sub>S</sub> is 240 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 3: 1 and I_S is 240 mA ?

$\text { Figure } 14 < 1 -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?$ $\text { Figure } 14 < 1$ -What is the reflected resistance seen by the primary in Figure 14-1 if the turns ratio is 4: 1 and IS is 40 mA ?