Question 1

Find the measurement that is the most accurate.

Accepted Answer

A)  123 ft 
B)  7,100 ft 
C)  710 ft 
D)  300 ft 
E)  The measurements have the same accuracy. 
A)  123 ft 
B)  7,100 ft 
C)  710 ft 
D)  300 ft 
E)  The measurements have the same accuracy. A

Question 2

Read the measurement shown on the vernier caliper.   __________ in.

Accepted Answer

6.592

Question 3

Consider the following measurement. $1.46$ cm
Find the precision.
__________ cm
Find the greatest possible error.
__________ cm
Find the relative error.
__________
Find the percent of error (to the nearest hundredth of a percent).
__________ %

Accepted Answer

$0.01 ; 0.005 ; 0.003425 ; 0.34$

Question 4

Read the measurement shown on the U.S. micrometer.   __________ in.

Accepted Answer

The answer of Read the measurement shown on the U.S....

Question 5

Read the measurement shown on the vernier caliper in inches.

Accepted Answer

A)  39.41 in. 
B)  4.341 in. 
C)  4.641 in. 
D)  3.941 in. 
E)  43.41 in. 
A)  39.41 in. 
B)  4.341 in. 
C)  4.641 in. 
D)  3.941 in. 
E)  43.41 in.

Question 6

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  15.925 mm 
B)  15.875 mm 
C)  158.75 mm 
D)  159.25 mm 
E)  168.25 mm 
A)  15.925 mm 
B)  15.875 mm 
C)  158.75 mm 
D)  159.25 mm 
E)  168.25 mm

Question 7

Read the measurement shown on the metric micrometer.

Accepted Answer

A)  54.2 mm 
B)  5.42 mm 
C)  0.542 mm 
D)  1.92 mm 
E)  10.42 mm 
A)  54.2 mm 
B)  5.42 mm 
C)  0.542 mm 
D)  1.92 mm 
E)  10.42 mm

Question 8

Read the measurement shown on the vernier caliper in inches.

Accepted Answer

A)  59.7 in. 
B)  6.82 in. 
C)  5.97 in. 
D)  5.87 in. 
E)  58.7 in. 
A)  59.7 in. 
B)  6.82 in. 
C)  5.97 in. 
D)  5.87 in. 
E)  58.7 in.

Question 9

Use the rules for addition of measurements to find the sum of the set of measurements.   $626 \text { in. } \quad 85.1 \text { in. } \quad 95 \text { in. }$

Accepted Answer

A)  810 in. 
B)  806.1 in. 
C)  800 in. 
D)  806 in. 
E)  1,215 in. 
A)  810 in. 
B)  806.1 in. 
C)  800 in. 
D)  806 in. 
E)  1,215 in.

Question 10

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  53.6 mm 
B)  60.6 mm 
C)  50.6 mm 
D)  5.06 mm 
E)  5.36 mm 
A)  53.6 mm 
B)  60.6 mm 
C)  50.6 mm 
D)  5.06 mm 
E)  5.36 mm

Question 11

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $4.001 \mathrm {~g}$

Accepted Answer

The answer of Determine the accuracy of the measurement; that...

Question 12

Read the measurement shown on each vernier caliper.   __________ mm

Accepted Answer

The answer of Read the measurement shown on each vernier...

Question 13

Read the measurement shown on each vernier caliper.   __________ mm

Accepted Answer

The answer of Read the measurement shown on each vernier...

Question 14

Use the rules for addition of measurements to find the sum of the set of measurements.
217 in.; 21.7 in.; 19 in.
__________ in.

Accepted Answer

The answer of Use the rules for addition of measurements...

Question 15

The measurement is $130$ V.
Find the precision of the measurement.
__________ V
Find the greatest possible error of the measurement.
__________ V

Accepted Answer

The answer of The measurement is $130$ V.
Find the precision...

Question 16

Read the English dial (the arrow near the zero indicates the initial deflection of the needle).   __________ in.

Accepted Answer

The answer of Read the English dial (the arrow near...

Question 17

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $0.0720$ in

Accepted Answer

The answer of Determine the accuracy of the measurement; that...

Question 18

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  5.895 mm 
B)  62.95 mm 
C)  5.395 mm 
D)  53.95 mm 
E)  58.95 mm 
A)  5.895 mm 
B)  62.95 mm 
C)  5.395 mm 
D)  53.95 mm 
E)  58.95 mm

Question 19

Read the scale.   __________ V

Accepted Answer

The answer of Read the scale.   __________ V...

Question 20

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $2,5 \overline { 0 } 0$ m

Accepted Answer

A)  3 
B)  4 
C)  2 
D)  6 
E)  5 
A)  3 
B)  4 
C)  2 
D)  6 
E)  5

Find the measurement that is the most accurate.

Read the measurement shown on the vernier caliper. __________ in.

Consider the following measurement. $1.46$ cm Find the precision. cm Find the greatest possible error. cm Find the relative error. Find the percent of error (to the nearest hundredth of a percent). %

Read the measurement shown on the U.S. micrometer. __________ in.

Read the measurement shown on the vernier caliper in inches.

Read the measurement shown on the vernier caliper in millimeters.

Read the measurement shown on the metric micrometer.

Read the measurement shown on the vernier caliper in inches.

Use the rules for addition of measurements to find the sum of the set of measurements. $626 \text { in. } \quad 85.1 \text { in. } \quad 95 \text { in. }$

Read the measurement shown on the vernier caliper in millimeters.

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $4.001 \mathrm {~g}$

Read the measurement shown on each vernier caliper. __________ mm

Read the measurement shown on each vernier caliper. __________ mm

Use the rules for addition of measurements to find the sum of the set of measurements. 217 in.; 21.7 in.; 19 in. __________ in.

The measurement is $130$ V. Find the precision of the measurement. V Find the greatest possible error of the measurement. V

Read the English dial (the arrow near the zero indicates the initial deflection of the needle). __________ in.

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $0.0720$ in

Read the measurement shown on the vernier caliper in millimeters.

Read the scale. __________ V

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $2,5 \overline { 0 } 0$ m

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

Exam 4: Measurement

Find the measurement that is the most accurate.

Read the measurement shown on the vernier caliper. __________ in.

Consider the following measurement. 1.461.461.46 cm Find the precision. __________ cm Find the greatest possible error. __________ cm Find the relative error. __________ Find the percent of error (to the nearest hundredth of a percent). __________ %

Read the measurement shown on the U.S. micrometer. __________ in.

Read the measurement shown on the vernier caliper in inches.

Read the measurement shown on the vernier caliper in millimeters.

Read the measurement shown on the metric micrometer.

Read the measurement shown on the vernier caliper in inches.

Use the rules for addition of measurements to find the sum of the set of measurements. 626 in. 85.1 in. 95 in. 626 \text { in. } \quad 85.1 \text { in. } \quad 95 \text { in. }626 in. 85.1 in. 95 in.

Read the measurement shown on the vernier caliper in millimeters.

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 4.001 g4.001 \mathrm {~g}4.001 g

Read the measurement shown on each vernier caliper. __________ mm

Read the measurement shown on each vernier caliper. __________ mm

Use the rules for addition of measurements to find the sum of the set of measurements. 217 in.; 21.7 in.; 19 in. __________ in.

The measurement is 130130130 V. Find the precision of the measurement. __________ V Find the greatest possible error of the measurement. __________ V

Read the English dial (the arrow near the zero indicates the initial deflection of the needle). __________ in.

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 0.07200.07200.0720 in

Read the measurement shown on the vernier caliper in millimeters.

Read the scale. __________ V

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 2,50‾02,5 \overline { 0 } 02,500 m

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

Consider the following measurement. $1.46$ cm Find the precision. cm Find the greatest possible error. cm Find the relative error. Find the percent of error (to the nearest hundredth of a percent). %

Use the rules for addition of measurements to find the sum of the set of measurements. $626 \text { in. } \quad 85.1 \text { in. } \quad 95 \text { in. }$

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $4.001 \mathrm {~g}$

The measurement is $130$ V. Find the precision of the measurement. V Find the greatest possible error of the measurement. V

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $0.0720$ in

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $2,5 \overline { 0 } 0$ m