Question 1

Read the measurement shown on the vernier caliper.   __________ in.

Accepted Answer

The answer of Read the measurement shown on the vernier...

Question 2

We are given the measurement of $8 \frac { 11 } { 15 }$ mi. The tolerance is $\frac { 1 } { 30 }$ mi. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

Accepted Answer

A)  $16 \frac { 23 } { 60 } , 8 \frac { 21 } { 30 } , \frac { 2 } { 15 }$ 
B)  $8 \frac { 23 } { 30 } , 16 \frac { 21 } { 60 } , \frac { 3 } { 15 }$ 
C)  $8 \frac { 23 } { 30 } , 8 \frac { 21 } { 30 } , \frac { 1 } { 15 }$ 
D)  $24 \frac { 23 } { 30 } , 8 \frac { 42 } { 30 } , \frac { 1 } { 15 }$ 
E)  $8 \frac { 23 } { 60 } , 16 \frac { 21 } { 60 } , \frac { 3 } { 30 }$ 
A)  $16 \frac { 23 } { 60 } , 8 \frac { 21 } { 30 } , \frac { 2 } { 15 }$ 
B)  $8 \frac { 23 } { 30 } , 16 \frac { 21 } { 60 } , \frac { 3 } { 15 }$ 
C)  $8 \frac { 23 } { 30 } , 8 \frac { 21 } { 30 } , \frac { 1 } { 15 }$ 
D)  $24 \frac { 23 } { 30 } , 8 \frac { 42 } { 30 } , \frac { 1 } { 15 }$ 
E)  $8 \frac { 23 } { 60 } , 16 \frac { 21 } { 60 } , \frac { 3 } { 30 }$

Question 3

Read the metric dial (the arrow near the zero indicates the initial deflection of the needle).

Accepted Answer

A)  3.17 mm 
B)  -2.17 mm 
C)  2.17 mm 
D)  17.02 mm 
E)  -2.83 mm 
A)  3.17 mm 
B)  -2.17 mm 
C)  2.17 mm 
D)  17.02 mm 
E)  -2.83 mm

Question 4

Find the measurement that is the most accurate.

Accepted Answer

A)  20.0 km 
B)  665.7 km 
C)  91.2 km 
D)  54.8 km 
E)  The measurements have the same accuracy. 
A)  20.0 km 
B)  665.7 km 
C)  91.2 km 
D)  54.8 km 
E)  The measurements have the same accuracy.

Question 5

Read the scale.   __________ V

Accepted Answer

The answer of Read the scale.   __________ V...

Question 6

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  78.25 mm 
B)  8.675 mm 
C)  80.75 mm 
D)  8.075 mm 
E)  7.825 mm 
A)  78.25 mm 
B)  8.675 mm 
C)  80.75 mm 
D)  8.075 mm 
E)  7.825 mm

Question 7

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  4.65 mm 
B)  64 mm 
C)  4.05 mm 
D)  46.5 mm 
E)  40.5 mm 
A)  4.65 mm 
B)  64 mm 
C)  4.05 mm 
D)  46.5 mm 
E)  40.5 mm

Question 8

An architect estimates a bid of $ $175,600$ . The maximum rate above the estimate is $7$ %. Find the maximum acceptable bid.

Accepted Answer

A)  $ $193,225$ 
B)  $ $187,466$ 
C)  $ $188,113$ 
D)  $ $195,906$ 
E)  $ $187,892$ 
A)  $ $193,225$ 
B)  $ $187,466$ 
C)  $ $188,113$ 
D)  $ $195,906$ 
E)  $ $187,892$

Question 9

Consider the following measurement. $60,200 \mathrm {~V}$ Find the precision, the greatest possible error, the relative error and the percent of error (to the nearest hundredth of a percent).

Accepted Answer

A)  $100 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.25 \%$ 
B)  $100 \mathrm {~V} ; 100 \mathrm {~V} ; 0.001661 ; 0.08 \%$ 
C)  $200 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.17 \%$ 
D)  $100 \mathrm {~V} ; 50 \mathrm {~V} ; 0.000831 ; 0.08 \%$ 
E)  $200 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.08 \%$ 
A)  $100 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.25 \%$ 
B)  $100 \mathrm {~V} ; 100 \mathrm {~V} ; 0.001661 ; 0.08 \%$ 
C)  $200 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.17 \%$ 
D)  $100 \mathrm {~V} ; 50 \mathrm {~V} ; 0.000831 ; 0.08 \%$ 
E)  $200 \mathrm {~V} ; 100 \mathrm {~V} ; 0.000831 ; 0.08 \%$

Question 10

Read the scale.   __________Ω

Accepted Answer

The answer of Read the scale.   __________Ω...

Question 11

Read the measurement shown on the metric micrometer.   __________ mm

Accepted Answer

The answer of Read the measurement shown on the metric...

Question 12

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  75.25 mm 
B)  73.25 mm 
C)  6.825 mm 
D)  7.325 mm 
E)  68.25 mm 
A)  75.25 mm 
B)  73.25 mm 
C)  6.825 mm 
D)  7.325 mm 
E)  68.25 mm

Question 13

What color code on the first three bands is needed for the resistance? $350 \Omega$

Accepted Answer

A)  First band Second Band Third band
Yellow white green 
B)  First band Second band Third band
Orange white orange 
C)  First band Second band Third band
White yellow green 
D)  First band Second band Third band
Yellow orange white 
E)  First band Second band Third band
Orange green yellow 
A)  First band Second Band Third band
Yellow white green 
B)  First band Second band Third band
Orange white orange 
C)  First band Second band Third band
White yellow green 
D)  First band Second band Third band
Yellow orange white 
E)  First band Second band Third band
Orange green yellow

Question 14

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  10.77 mm 
B)  107.7 mm 
C)  10.42 mm 
D)  104.2 mm 
E)  113.2 mm 
A)  10.77 mm 
B)  107.7 mm 
C)  10.42 mm 
D)  104.2 mm 
E)  113.2 mm

Question 15

What color code on the first three bands is needed for the resistance? $79 \Omega$

Accepted Answer

A)  First band Second band Third band
Violet red violet 
B)  First band Second band Third band
Red black white 
C)  First band Second band Third band
Black violet red 
D)  First band Second band Third band
Violet white black 
E)  First band Second band Third band
White red black 
A)  First band Second band Third band
Violet red violet 
B)  First band Second band Third band
Red black white 
C)  First band Second band Third band
Black violet red 
D)  First band Second band Third band
Violet white black 
E)  First band Second band Third band
White red black

Question 16

Read the measurement shown on the vernier caliper in inches.

Accepted Answer

A)  4.578 in. 
B)  3.878 in. 
C)  38.78 in. 
D)  37.28 in. 
E)  3.728 in. 
A)  4.578 in. 
B)  3.878 in. 
C)  38.78 in. 
D)  37.28 in. 
E)  3.728 in.

Question 17

The measurement is 9.4030 mi. Find the precision and the greatest possible error of the measurement.

Accepted Answer

A)  The precision of the measurement is 0.000001 mi. The greatest possible error of the measurement is 0.000005 mi. 
B)  The precision of the measurement is 0.0001 mi. The greatest possible error of the measurement is 0.00005 mi. 
C)  The precision of the measurement is 0.00001 mi. The greatest possible error of the measurement is 0.00005 mi. 
D)  The precision of the measurement is 0.00001 mi. The greatest possible error of the measurement is 0.000005 mi. 
E)  The precision of the measurement is 0.000001 mi. The greatest possible error of the measurement is 0.0000005 mi. 
A)  The precision of the measurement is 0.000001 mi. The greatest possible error of the measurement is 0.000005 mi. 
B)  The precision of the measurement is 0.0001 mi. The greatest possible error of the measurement is 0.00005 mi. 
C)  The precision of the measurement is 0.00001 mi. The greatest possible error of the measurement is 0.00005 mi. 
D)  The precision of the measurement is 0.00001 mi. The greatest possible error of the measurement is 0.000005 mi. 
E)  The precision of the measurement is 0.000001 mi. The greatest possible error of the measurement is 0.0000005 mi.

Question 18

Find the measurement that is the most accurate.

Accepted Answer

A)  123 ft 
B)  7,100 ft 
C)  710 ft 
D)  300 ft 
E)  The measurements have the same accuracy. 
A)  123 ft 
B)  7,100 ft 
C)  710 ft 
D)  300 ft 
E)  The measurements have the same accuracy.

Question 19

Read the measurement shown on each vernier caliper.   __________ mm

Accepted Answer

The answer of Read the measurement shown on each vernier...

Question 20

We are given a measurement of 17,000 V. The tolerance is $\pm 2,000$ V.
Find the upper limit.
__________ V
Find the lower limit.
__________ V
Find the tolerance interval.
__________ V

Accepted Answer

19,000; 15

Read the measurement shown on the vernier caliper. __________ in.

We are given the measurement of $8 \frac { 11 } { 15 }$ mi. The tolerance is $\frac { 1 } { 30 }$ mi. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

Read the metric dial (the arrow near the zero indicates the initial deflection of the needle).

Find the measurement that is the most accurate.

Read the scale. __________ V

Read the measurement shown on the vernier caliper in millimeters.

Read the measurement shown on the vernier caliper in millimeters.

An architect estimates a bid of $ $175,600$ . The maximum rate above the estimate is $7$ %. Find the maximum acceptable bid.

Consider the following measurement. $60,200 \mathrm {~V}$ Find the precision, the greatest possible error, the relative error and the percent of error (to the nearest hundredth of a percent).

Read the scale. __________Ω

Read the measurement shown on the metric micrometer. __________ mm

Read the measurement shown on the vernier caliper in millimeters.

What color code on the first three bands is needed for the resistance? $350 \Omega$

Read the measurement shown on the vernier caliper in millimeters.

What color code on the first three bands is needed for the resistance? $79 \Omega$

Read the measurement shown on the vernier caliper in inches.

The measurement is 9.4030 mi. Find the precision and the greatest possible error of the measurement.

Find the measurement that is the most accurate.

Read the measurement shown on each vernier caliper. __________ mm

We are given a measurement of 17,000 V. The tolerance is $\pm 2,000$ V. Find the upper limit. V Find the lower limit. V Find the tolerance interval. __ V

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

Exam 4: Measurement

Read the measurement shown on the vernier caliper. __________ in.

We are given the measurement of 811158 \frac { 11 } { 15 }81511​ mi. The tolerance is 130\frac { 1 } { 30 }301​ mi. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

Read the metric dial (the arrow near the zero indicates the initial deflection of the needle).

Find the measurement that is the most accurate.

Read the scale. __________ V

Read the measurement shown on the vernier caliper in millimeters.

Read the measurement shown on the vernier caliper in millimeters.

An architect estimates a bid of $ 175,600175,600175,600 . The maximum rate above the estimate is 777 %. Find the maximum acceptable bid.

Consider the following measurement. 60,200 V60,200 \mathrm {~V}60,200 V Find the precision, the greatest possible error, the relative error and the percent of error (to the nearest hundredth of a percent).

Read the scale. __________Ω

Read the measurement shown on the metric micrometer. __________ mm

Read the measurement shown on the vernier caliper in millimeters.

What color code on the first three bands is needed for the resistance? 350Ω350 \Omega350Ω

Read the measurement shown on the vernier caliper in millimeters.

What color code on the first three bands is needed for the resistance? 79Ω79 \Omega79Ω

Read the measurement shown on the vernier caliper in inches.

The measurement is 9.4030 mi. Find the precision and the greatest possible error of the measurement.

Find the measurement that is the most accurate.

Read the measurement shown on each vernier caliper. __________ mm

We are given a measurement of 17,000 V. The tolerance is ±2,000\pm 2,000±2,000 V. Find the upper limit. __________ V Find the lower limit. __________ V Find the tolerance interval. __________ V

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

We are given the measurement of $8 \frac { 11 } { 15 }$ mi. The tolerance is $\frac { 1 } { 30 }$ mi. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

An architect estimates a bid of $ $175,600$ . The maximum rate above the estimate is $7$ %. Find the maximum acceptable bid.

Consider the following measurement. $60,200 \mathrm {~V}$ Find the precision, the greatest possible error, the relative error and the percent of error (to the nearest hundredth of a percent).

What color code on the first three bands is needed for the resistance? $350 \Omega$

What color code on the first three bands is needed for the resistance? $79 \Omega$

We are given a measurement of 17,000 V. The tolerance is $\pm 2,000$ V. Find the upper limit. V Find the lower limit. V Find the tolerance interval. __ V