Question 1

Read the English dial (the arrow near the zero indicates the initial deflection of the needle).   __________ in.

Accepted Answer

The answer of Read the English dial (the arrow near...

Question 2

Read the measurement shown on each vernier caliper.   __________ mm

Accepted Answer

The answer of Read the measurement shown on each vernier...

Question 3

Consider the set of measurements.
900 ft, 730 ft, and 693 ft
Find the measurement that is the most accurate. If all have the same accuracy, so indicate.
__________
Find the measurement that is the most precise. If all have the same precision, so indicate.
__________

Accepted Answer

The answer of Consider the set of measurements.
900 ft, 730...

Question 4

Read the measurement shown on the vernier caliper in inches.

Accepted Answer

A)  17.03 in. 
B)  1.703 in. 
C)  16.03 in. 
D)  2.253 in. 
E)  1.603 in. 
A)  17.03 in. 
B)  1.703 in. 
C)  16.03 in. 
D)  2.253 in. 
E)  1.603 in.

Question 5

Read the measurement shown on the U.S. micrometer.   __________ in.

Accepted Answer

The answer of Read the measurement shown on the U.S....

Question 6

We are given the measurement of 2.11 cm. The tolerance is ±0.05 cm..
Find the upper limit.
__________ cm
Find the lower limit.
__________ cm
Find the tolerance interval.
__________ cm

Accepted Answer

The answer of We are given the measurement of 2.11...

Question 7

The measurement is $80 , \overline { 0 } 00 \mathrm {~L}$ .
Find the precision of the measurement.
__________ $L$ Find the greatest possible error of the measurement.
__________ $L$

Accepted Answer

The answer of The measurement is \(80 , \overline {...

Question 8

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 0.052000 A

Accepted Answer

A)  5 
B)  2 
C)  7 
D)  3 
E)  6 
A)  5 
B)  2 
C)  7 
D)  3 
E)  6

Question 9

For the resistor shown below, find the resistance and the tolerance, written as a percent.

Accepted Answer

A)  160000 Ω , ±20% 
B)  170000 Ω , ±20% 
C)  1600 Ω , ±20% 
D)  460000 Ω , ±5% 
E)  460000 Ω , ±20% 
A)  160000 Ω , ±20% 
B)  170000 Ω , ±20% 
C)  1600 Ω , ±20% 
D)  460000 Ω , ±5% 
E)  460000 Ω , ±20%

Question 10

The measurement is 34 km. Find the precision and the greatest possible error of the measurement.

Accepted Answer

A)  The precision of the measurement is 0.1 km. The greatest possible error of the measurement is 5 km. 
B)  The precision of the measurement is 10 km. The greatest possible error of the measurement is 0.5 km. 
C)  The precision of the measurement is 0.1 km. The greatest possible error of the measurement is 0.05 km. 
D)  The precision of the measurement is 1 km. The greatest possible error of the measurement is 0.5 km. 
E)  The precision of the measurement is 10 km. The greatest possible error of the measurement is 5 km. 
A)  The precision of the measurement is 0.1 km. The greatest possible error of the measurement is 5 km. 
B)  The precision of the measurement is 10 km. The greatest possible error of the measurement is 0.5 km. 
C)  The precision of the measurement is 0.1 km. The greatest possible error of the measurement is 0.05 km. 
D)  The precision of the measurement is 1 km. The greatest possible error of the measurement is 0.5 km. 
E)  The precision of the measurement is 10 km. The greatest possible error of the measurement is 5 km.

Question 11

The antifreeze of a car leaks. One day it lost 0.79 gal, a second day it lost 0.7 gal, and a third day it lost 0.21 gal. What is the total antifreeze lost over the three-day period? Use the rules for addition and subtraction of measurements.
__________ gal

Accepted Answer

The answer of The antifreeze of a car leaks. One...

Question 12

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  6.19 mm 
B)  63.4 mm 
C)  56.9 mm 
D)  61.9 mm 
E)  5.69 mm 
A)  6.19 mm 
B)  63.4 mm 
C)  56.9 mm 
D)  61.9 mm 
E)  5.69 mm

Question 13

For the resistor shown below, find the resistance and the tolerance, written as a percent.

Accepted Answer

A)  10000 Ω , ±20% 
B)  300000 Ω , ±10% 
C)  10000 Ω , ±10% 
D)  30000 Ω , ±10% 
E)  39000 Ω , ±10% 
A)  10000 Ω , ±20% 
B)  300000 Ω , ±10% 
C)  10000 Ω , ±10% 
D)  30000 Ω , ±10% 
E)  39000 Ω , ±10%

Question 14

We are given a measurement of $22,100$ V. The tolerance is $\pm 100$ V. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

Accepted Answer

A)  $44,400,22,000,100$ 
B)  $22,200,44,000,200$ 
C)  $22,200,44,000,100$ 
D)  $44,400,66,000,100$ 
E)  $22,200,22,000,200$ 
A)  $44,400,22,000,100$ 
B)  $22,200,44,000,200$ 
C)  $22,200,44,000,100$ 
D)  $44,400,66,000,100$ 
E)  $22,200,22,000,200$

Question 15

An architect estimates a bid of $ $168,400$ . The maximum rate above the estimate is $13$ %.
Find the maximum acceptable bid. Round your answer to the nearest dollar.
$__________

Accepted Answer

The answer of An architect estimates a bid of $...

Question 16

Read the measurement shown on the vernier caliper in millimeters.

Accepted Answer

A)  8.39 mm 
B)  8.69 mm 
C)  83.9 mm 
D)  86.9 mm 
E)  92.9 mm 
A)  8.39 mm 
B)  8.69 mm 
C)  83.9 mm 
D)  86.9 mm 
E)  92.9 mm

Question 17

Consider the following measurement.
10 lb
Find the precision.
__________ lb
Find the greatest possible error.
__________ lb
Find the relative error.
__________
Find the percent of error (to the nearest hundredth of a percent).
__________ %

Accepted Answer

The answer of Consider the following measurement.
10 lb
Find the precision.
__________...

Question 18

Read the measurement shown on each vernier caliper.   __________ mm

Accepted Answer

The answer of Read the measurement shown on each vernier...

Question 19

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $543 , \overline { 0 } 00$ mi

Accepted Answer

A)  5 
B)  6 
C)  2 
D)  1 
E)  4 
A)  5 
B)  6 
C)  2 
D)  1 
E)  4

Question 20

For the resistor shown below, find the upper and the lower limit in ohms, Ω.

Accepted Answer

A)  1,116,500 Ω, 763,500 Ω 
B)  1,198,000 Ω, 682,000 Ω 
C)  1,093,000 Ω, 787,000 Ω 
D)  1,128,000 Ω, 752,000 Ω 
E)  1,093,000 Ω, 763,500 Ω 
A)  1,116,500 Ω, 763,500 Ω 
B)  1,198,000 Ω, 682,000 Ω 
C)  1,093,000 Ω, 787,000 Ω 
D)  1,128,000 Ω, 752,000 Ω 
E)  1,093,000 Ω, 763,500 Ω

Read the English dial (the arrow near the zero indicates the initial deflection of the needle). __________ in.

Read the measurement shown on each vernier caliper. __________ mm

Consider the set of measurements. 900 ft, 730 ft, and 693 ft Find the measurement that is the most accurate. If all have the same accuracy, so indicate. Find the measurement that is the most precise. If all have the same precision, so indicate.

Read the measurement shown on the vernier caliper in inches.

Read the measurement shown on the U.S. micrometer. __________ in.

We are given the measurement of 2.11 cm. The tolerance is ±0.05 cm.. Find the upper limit. cm Find the lower limit. cm Find the tolerance interval. __ cm

The measurement is $80 , \overline { 0 } 00 \mathrm {~L}$ . Find the precision of the measurement. $L$ Find the greatest possible error of the measurement. $L$

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 0.052000 A

For the resistor shown below, find the resistance and the tolerance, written as a percent.

The measurement is 34 km. Find the precision and the greatest possible error of the measurement.

The antifreeze of a car leaks. One day it lost 0.79 gal, a second day it lost 0.7 gal, and a third day it lost 0.21 gal. What is the total antifreeze lost over the three-day period? Use the rules for addition and subtraction of measurements. __________ gal

Read the measurement shown on the vernier caliper in millimeters.

For the resistor shown below, find the resistance and the tolerance, written as a percent.

We are given a measurement of $22,100$ V. The tolerance is $\pm 100$ V. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

An architect estimates a bid of $ $168,400$ . The maximum rate above the estimate is $13$ %. Find the maximum acceptable bid. Round your answer to the nearest dollar. $__________

Read the measurement shown on the vernier caliper in millimeters.

Consider the following measurement. 10 lb Find the precision. lb Find the greatest possible error. lb Find the relative error. Find the percent of error (to the nearest hundredth of a percent). %

Read the measurement shown on each vernier caliper. __________ mm

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $543 , \overline { 0 } 00$ mi

For the resistor shown below, find the upper and the lower limit in ohms, Ω.

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

Exam 4: Measurement

Read the English dial (the arrow near the zero indicates the initial deflection of the needle). __________ in.

Read the measurement shown on each vernier caliper. __________ mm

Consider the set of measurements. 900 ft, 730 ft, and 693 ft Find the measurement that is the most accurate. If all have the same accuracy, so indicate. __________ Find the measurement that is the most precise. If all have the same precision, so indicate. __________

Read the measurement shown on the vernier caliper in inches.

Read the measurement shown on the U.S. micrometer. __________ in.

We are given the measurement of 2.11 cm. The tolerance is ±0.05 cm.. Find the upper limit. __________ cm Find the lower limit. __________ cm Find the tolerance interval. __________ cm

The measurement is 80,0‾00 L80 , \overline { 0 } 00 \mathrm {~L}80,000 L . Find the precision of the measurement. __________ LLL Find the greatest possible error of the measurement. __________ LLL

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 0.052000 A

For the resistor shown below, find the resistance and the tolerance, written as a percent.

The measurement is 34 km. Find the precision and the greatest possible error of the measurement.

The antifreeze of a car leaks. One day it lost 0.79 gal, a second day it lost 0.7 gal, and a third day it lost 0.21 gal. What is the total antifreeze lost over the three-day period? Use the rules for addition and subtraction of measurements. __________ gal

Read the measurement shown on the vernier caliper in millimeters.

For the resistor shown below, find the resistance and the tolerance, written as a percent.

We are given a measurement of 22,10022,10022,100 V. The tolerance is ±100\pm 100±100 V. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

An architect estimates a bid of $ 168,400168,400168,400 . The maximum rate above the estimate is 131313 %. Find the maximum acceptable bid. Round your answer to the nearest dollar. $__________

Read the measurement shown on the vernier caliper in millimeters.

Consider the following measurement. 10 lb Find the precision. __________ lb Find the greatest possible error. __________ lb Find the relative error. __________ Find the percent of error (to the nearest hundredth of a percent). __________ %

Read the measurement shown on each vernier caliper. __________ mm

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. 543,0‾00543 , \overline { 0 } 00543,000 mi

For the resistor shown below, find the upper and the lower limit in ohms, Ω.

Basic Concepts

Signed Numbers and Powers of 10

The Metric System

Polynomials: an Introduction to Algebra

Equations and Formulas

Ratio and Proportion

Graphing Linear Equations

Systems of Linear Equations

Factoring Algebraic Expressions

Quadratic Equations

Geometry

Right Triangle Trigonometry

Trigonometry With Any Angle

Basic Statistics

Binary and Hexadecimal Numbers

Filters

Consider the set of measurements. 900 ft, 730 ft, and 693 ft Find the measurement that is the most accurate. If all have the same accuracy, so indicate. Find the measurement that is the most precise. If all have the same precision, so indicate.

We are given the measurement of 2.11 cm. The tolerance is ±0.05 cm.. Find the upper limit. cm Find the lower limit. cm Find the tolerance interval. __ cm

The measurement is $80 , \overline { 0 } 00 \mathrm {~L}$ . Find the precision of the measurement. $L$ Find the greatest possible error of the measurement. $L$

We are given a measurement of $22,100$ V. The tolerance is $\pm 100$ V. Find the upper limit, the lower limit, and the tolerance interval for the measurement.

An architect estimates a bid of $ $168,400$ . The maximum rate above the estimate is $13$ %. Find the maximum acceptable bid. Round your answer to the nearest dollar. $__________

Consider the following measurement. 10 lb Find the precision. lb Find the greatest possible error. lb Find the relative error. Find the percent of error (to the nearest hundredth of a percent). %

Determine the accuracy of the measurement; that is, give the number of significant digits for the measurement. $543 , \overline { 0 } 00$ mi