Question 1

In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

Accepted Answer

A)  Admin Tab > System Analysis Tools > Collect System Information 
B)  Admin Tab > System Notifications > Configure System Reports and Alerts 
C)  Dashboard Tab > System Analysis Tools > Detect Bottlenecks 
D)  Admin Tab > RPA Clusters > Export Consolidated Statistics 
A)  Admin Tab > System Analysis Tools > Collect System Information 
B)  Admin Tab > System Notifications > Configure System Reports and Alerts 
C)  Dashboard Tab > System Analysis Tools > Detect Bottlenecks 
D)  Admin Tab > RPA Clusters > Export Consolidated Statistics

Question 2

While attaching an MS Windows host to an EMC XtremIO array, you are tasked with adjusting the queue depth on the Qlogic HBAs. For optimum performance with XtremIO, what value should you use?

Accepted Answer

A)  32 
B)  128 
C)  256 
D)  512 
A)  32 
B)  128 
C)  256 
D)  512

Question 3

In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack's PDUs?

Accepted Answer

A)  0 
B)  1 
C)  2 
D)  4 
A)  0 
B)  1 
C)  2 
D)  4

Question 4

Which XMCLI command can be used to confirm connectivity between the XMS and an ESRS Gateway Server?

Accepted Answer

A)  test-xms-tcp-connectivity 
B)  test-ip-connectivity 
C)  show-syr-notifier 
D)  show-xms-info 
A)  test-xms-tcp-connectivity 
B)  test-ip-connectivity 
C)  show-syr-notifier 
D)  show-xms-info

Question 5

When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

Accepted Answer

A)  Volumes that are all close to the same size 
B)  Volumes masked to the production host 
C)  Any volume less than 10 GB 
D)  Only thin LUNs 
A)  Volumes that are all close to the same size 
B)  Volumes masked to the production host 
C)  Any volume less than 10 GB 
D)  Only thin LUNs

Question 6

Which network port on the physical XMS should be connected to the Ethernet switch?

Accepted Answer

A)  MGMT 
B)  TECH 
C)  Any Unused 
D)  KVM 
A)  MGMT 
B)  TECH 
C)  Any Unused 
D)  KVM

Question 7

What is a characteristic of XtremIO Data Protection (XDP)?

Accepted Answer

A)  Uses a protection capacity overhead of 8% 
B)  Automatically rebuilds failed disk on hot spare 
C)  Can sustain only one simultaneous drive failure 
D)  Manually rebuilds failed disk in case of drive failure 
A)  Uses a protection capacity overhead of 8% 
B)  Automatically rebuilds failed disk on hot spare 
C)  Can sustain only one simultaneous drive failure 
D)  Manually rebuilds failed disk in case of drive failure

Question 8

A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances. What should you advise them?

Accepted Answer

A)  They can only use physical RPAs in the current environment. 
B)  For performance reasons, they can mix vRPAs and physical RPAs in the same RPA cluster, but only at remote sites. 
C)  For performance reasons, they cannot mix physical and vRPAs within an RPA cluster. 
D)  They can mix vRPA and physical RPAs in the same RPA cluster at all sites. 
A)  They can only use physical RPAs in the current environment. 
B)  For performance reasons, they can mix vRPAs and physical RPAs in the same RPA cluster, but only at remote sites. 
C)  For performance reasons, they cannot mix physical and vRPAs within an RPA cluster. 
D)  They can mix vRPA and physical RPAs in the same RPA cluster at all sites.

Question 9

A company recently acquired a new DR site and requires local Fibre Channel based production data to be replicated synchronously. They are investigating what infrastructure is needed on this DR site. What is an important connectivity consideration?

Accepted Answer

A)  Site-to-site connectivity can be based on IP. 
B)  Site-to-site connectivity requires Fibre Channel. 
C)  Site-to-site connectivity requires FCIP. 
D)  Maximum synchronous replication speed is 400 MBps. 
A)  Site-to-site connectivity can be based on IP. 
B)  Site-to-site connectivity requires Fibre Channel. 
C)  Site-to-site connectivity requires FCIP. 
D)  Maximum synchronous replication speed is 400 MBps.

Question 10

An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal?

Accepted Answer

A)  It is deleted. 
B)  It is replicated to the journal at the production site. 
C)  It is replicated to the journal volume at the DR site. 
D)  It remains as accessible snapshots at the DR site. 
A)  It is deleted. 
B)  It is replicated to the journal at the production site. 
C)  It is replicated to the journal volume at the DR site. 
D)  It remains as accessible snapshots at the DR site.

Question 11

A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR site. RP will be protecting three datastores: A thick 100 GB LUN containing 60 GB of data A thin 50 GB LUN containing 15 GB of data A thick 75 GB LUN containing 75 GB of data How much of the user data is being replicated to the DR site?

Accepted Answer

A)  150 
B)  185 
C)  190 
D)  225 
A)  150 
B)  185 
C)  190 
D)  225

Question 12

You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available. What would be a possible cause?

Accepted Answer

A)  The volumes are not masked to the RPAs. 
B)  The volumes are masked to a host. 
C)  The journal volumes are on a non-licensed array. 
D)  Consistency Groups can only be created by boxmgmt. 
A)  The volumes are not masked to the RPAs. 
B)  The volumes are masked to a host. 
C)  The journal volumes are on a non-licensed array. 
D)  Consistency Groups can only be created by boxmgmt.

Question 13

Which RecoverPoint tool is used for system conversions?

Accepted Answer

A)  Deployment Manager 
B)  Unisphere for RecoverPoint 
C)  SolVe Desktop 
D)  BCSD Sizing 
A)  Deployment Manager 
B)  Unisphere for RecoverPoint 
C)  SolVe Desktop 
D)  BCSD Sizing

Question 14

What is a possible trigger to initiate RecoverPoint Snap-based Replication?

Accepted Answer

A)  High Load condition detected 
B)  RecoverPoint snapshot takes place 
C)  INIT snapshot takes place 
D)  Incoming date marked on Delta Marker stream 
A)  High Load condition detected 
B)  RecoverPoint snapshot takes place 
C)  INIT snapshot takes place 
D)  Incoming date marked on Delta Marker stream

Question 15

What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

Accepted Answer

A)  Distributed Consistency Groups 
B)  Journal Compression 
C)  Fibre Channel connections 
D)  Multi-Cluster copies 
A)  Distributed Consistency Groups 
B)  Journal Compression 
C)  Fibre Channel connections 
D)  Multi-Cluster copies

Question 16

A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version. How should this be done?

Accepted Answer

A)  Choose the option to upgrade the RPA version from an ISO while installing RecoverPoint using Deployment Manager. 
B)  Before doing the install ensure all the RPAs IP addresses reach each other. Connect to RPA1 with boxmgmt and do the upgrade. 
C)  Install the new system with Deployment Manager and then log in as boxmgmt and perform the upgrade on one RPA. 
D)  Upgrade the RPAs to the latest version first; otherwise Deployment Manager will prevent the installation. 
A)  Choose the option to upgrade the RPA version from an ISO while installing RecoverPoint using Deployment Manager. 
B)  Before doing the install ensure all the RPAs IP addresses reach each other. Connect to RPA1 with boxmgmt and do the upgrade. 
C)  Install the new system with Deployment Manager and then log in as boxmgmt and perform the upgrade on one RPA. 
D)  Upgrade the RPAs to the latest version first; otherwise Deployment Manager will prevent the installation.

Question 17

A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint. Which RecoverPoint option should they use?

Accepted Answer

A)  Test a Copy 
B)  Fail Over 
C)  Fail Back 
D)  Recover Production 
A)  Test a Copy 
B)  Fail Over 
C)  Fail Back 
D)  Recover Production

Question 18

A company is using RecoverPoint to protect their environment. They need to add a new Replication Set to a Consistency Group that will have an extremely high I/O load. What would best meet their needs?

Accepted Answer

A)  Use the Distributed Consistency Group feature 
B)  Increase the number of storage LUNs for the journal 
C)  Devote an RPA to just that Consistency Group 
D)  Increase the Consistency Group journal volume size 
A)  Use the Distributed Consistency Group feature 
B)  Increase the number of storage LUNs for the journal 
C)  Devote an RPA to just that Consistency Group 
D)  Increase the Consistency Group journal volume size

Question 19

What is a characteristic of a volume sweep?

Accepted Answer

A)  Initialization is done on specific volumes in a Consistency Group. 
B)  Initialization is done on all volumes in a Consistency Group. 
C)  A volume sweep occurs when a user enables a disabled volume. 
D)  A volume sweep occurs when a user enables a disabled splitter. 
A)  Initialization is done on specific volumes in a Consistency Group. 
B)  Initialization is done on all volumes in a Consistency Group. 
C)  A volume sweep occurs when a user enables a disabled volume. 
D)  A volume sweep occurs when a user enables a disabled splitter.

Question 20

When determining the journal volume size, which parameters must be considered?

Accepted Answer

A)  Rate of change Data set to be replicated Number of snapshots to retain 
B)  Percentage of sequential writes RPO/RTO 
C)  Consistency Group type 
D)  Number of Consistency Groups Network type 
A)  Rate of change Data set to be replicated Number of snapshots to retain 
B)  Percentage of sequential writes RPO/RTO 
C)  Consistency Group type 
D)  Number of Consistency Groups Network type

In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

While attaching an MS Windows host to an EMC XtremIO array, you are tasked with adjusting the queue depth on the Qlogic HBAs. For optimum performance with XtremIO, what value should you use?

In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack's PDUs?

Which XMCLI command can be used to confirm connectivity between the XMS and an ESRS Gateway Server?

When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

Which network port on the physical XMS should be connected to the Ethernet switch?

What is a characteristic of XtremIO Data Protection (XDP)?

A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances. What should you advise them?

A company recently acquired a new DR site and requires local Fibre Channel based production data to be replicated synchronously. They are investigating what infrastructure is needed on this DR site. What is an important connectivity consideration?

An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal?

You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available. What would be a possible cause?

Which RecoverPoint tool is used for system conversions?

What is a possible trigger to initiate RecoverPoint Snap-based Replication?

What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version. How should this be done?

A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint. Which RecoverPoint option should they use?

A company is using RecoverPoint to protect their environment. They need to add a new Replication Set to a Consistency Group that will have an extremely high I/O load. What would best meet their needs?

What is a characteristic of a volume sweep?

When determining the journal volume size, which parameters must be considered?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 2: XtremIO Solutions Specialist Exam for Implementation Engineers

In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

While attaching an MS Windows host to an EMC XtremIO array, you are tasked with adjusting the queue depth on the Qlogic HBAs. For optimum performance with XtremIO, what value should you use?

In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack's PDUs?

Which XMCLI command can be used to confirm connectivity between the XMS and an ESRS Gateway Server?

When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

Which network port on the physical XMS should be connected to the Ethernet switch?

What is a characteristic of XtremIO Data Protection (XDP)?

A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances. What should you advise them?

A company recently acquired a new DR site and requires local Fibre Channel based production data to be replicated synchronously. They are investigating what infrastructure is needed on this DR site. What is an important connectivity consideration?

An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal?

You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available. What would be a possible cause?

Which RecoverPoint tool is used for system conversions?

What is a possible trigger to initiate RecoverPoint Snap-based Replication?

What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version. How should this be done?

A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint. Which RecoverPoint option should they use?

A company is using RecoverPoint to protect their environment. They need to add a new Replication Set to a Consistency Group that will have an extremely high I/O load. What would best meet their needs?

What is a characteristic of a volume sweep?

When determining the journal volume size, which parameters must be considered?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters