Question 1

You are adding an RPA to a cluster using Deployment Manager. What requirement must be satisfied before proceeding?

Accepted Answer

A)  Zoning and LUN masking must be known to be identical to the existing RPAs in the cluster. 
B)  RPA iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader. 
C)  RPA and array iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader. 
D)  RPA and Storage iSCSI configuration settings will automatically be read from the cluster. 
A)  Zoning and LUN masking must be known to be identical to the existing RPAs in the cluster. 
B)  RPA iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader. 
C)  RPA and array iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader. 
D)  RPA and Storage iSCSI configuration settings will automatically be read from the cluster.

Question 2

What is the maximum number of copies of production data supported with RecoverPoint?

Accepted Answer

A)  Four remote copies 
B)  One local copy and four remote copies 
C)  Two remote copies 
D)  Two local copies and two remote copies 
A)  Four remote copies 
B)  One local copy and four remote copies 
C)  Two remote copies 
D)  Two local copies and two remote copies

Question 3

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible?

Accepted Answer

A)  Add two RPAs to the primary site and add two RPAs to the DR site 
B)  Add two RPAs to the primary site only 
C)  Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site 
D)  Add two RPAs to the DR site only 
A)  Add two RPAs to the primary site and add two RPAs to the DR site 
B)  Add two RPAs to the primary site only 
C)  Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site 
D)  Add two RPAs to the DR site only

Question 4

What is the order of deduplication and compression?

Accepted Answer

A)  Data is first deduplicated, then it is compressed 
B)  Data is first compressed, then it is deduplicated 
C)  Data is deduplicated and compressed at the same time 
D)  Data is only deduplicated so compression does not occur 
A)  Data is first deduplicated, then it is compressed 
B)  Data is first compressed, then it is deduplicated 
C)  Data is deduplicated and compressed at the same time 
D)  Data is only deduplicated so compression does not occur

Question 5

You have VMware SRM with RecoverPoint protection already configured. What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?

Accepted Answer

A)  VSI RecoverPoint Management plug-in 
B)  Replication Manager 
C)  VSI for VMware vSphere Web Client 
D)  RecoverPoint SRA 
A)  VSI RecoverPoint Management plug-in 
B)  Replication Manager 
C)  VSI for VMware vSphere Web Client 
D)  RecoverPoint SRA

Question 6

Which element of the GUI always displays the cluster you are actively managing?

Accepted Answer

A)  Status Bar 
B)  Workspace 
C)  Inventory Section 
D)  Storage Section 
A)  Status Bar 
B)  Workspace 
C)  Inventory Section 
D)  Storage Section

Question 7

An alert has been generated. Which document can you examine for more detailed information regarding the error?

Accepted Answer

A)  XtremIO User Guide 
B)  XtremIO Security Configuration Guide 
C)  XtremIO Release Notes 
D)  XtremIO Host Configuration Guide 
A)  XtremIO User Guide 
B)  XtremIO Security Configuration Guide 
C)  XtremIO Release Notes 
D)  XtremIO Host Configuration Guide

Question 8

What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

Accepted Answer

A)  RecoverPoint Splitter Enabler only 
B)  RecoverPoint Driver and RecoverPoint Splitter Enabler 
C)  RecoverPoint License 
D)  Unisphere Service Manager 
A)  RecoverPoint Splitter Enabler only 
B)  RecoverPoint Driver and RecoverPoint Splitter Enabler 
C)  RecoverPoint License 
D)  Unisphere Service Manager

Question 9

After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails. What might be the problem?

Accepted Answer

A)  New cluster has existing Consistency Group 
B)  RPAs at second cluster are not same type 
C)  Second cluster not yet added to the Repository 
D)  No splitter added to second cluster 
A)  New cluster has existing Consistency Group 
B)  RPAs at second cluster are not same type 
C)  Second cluster not yet added to the Repository 
D)  No splitter added to second cluster

Question 10

What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

Accepted Answer

A)  1 
B)  2 
C)  4 
D)  5 
A)  1 
B)  2 
C)  4 
D)  5

Question 11

Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

Accepted Answer

A)  MetroPoint 
B)  Continuous Remote Replication 
C)  Distributed Consistency Groups 
D)  Group Sets 
A)  MetroPoint 
B)  Continuous Remote Replication 
C)  Distributed Consistency Groups 
D)  Group Sets

Question 12

Which IP address on the physical XMS should you connect to perform initial configuration?

Accepted Answer

A)  10.0.0.1 
B)  128.221.252.2 
C)  169.254.254.1 
D)  192.168.0.1 
A)  10.0.0.1 
B)  128.221.252.2 
C)  169.254.254.1 
D)  192.168.0.1

Question 13

In which section in the Dashboard is the volume capacity displayed?

Accepted Answer

A)  Storage 
B)  Configuration 
C)  Inventory 
D)  Status 
A)  Storage 
B)  Configuration 
C)  Inventory 
D)  Status

Question 14

You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX. What is the recommended management solution?

Accepted Answer

A)  Create one CG using VNX and VMAX volumes 
B)  Create a new RecoverPoint cluster and add the VNX splitter 
C)  Migrate all LUNs to the VMAX 
D)  Create two CGs: one for VNX volumes and another for VMAX volumes 
A)  Create one CG using VNX and VMAX volumes 
B)  Create a new RecoverPoint cluster and add the VNX splitter 
C)  Migrate all LUNs to the VMAX 
D)  Create two CGs: one for VNX volumes and another for VMAX volumes

Question 15

A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies. What is the highest frequency available for point-in-time copies in this environment?

Accepted Answer

A)  One per I/O 
B)  One per sec. 
C)  One per 500 µsec. 
D)  One per 500 msec. 
A)  One per I/O 
B)  One per sec. 
C)  One per 500 µsec. 
D)  One per 500 msec.

Question 16

Which statement is true about Logged Access mode?

Accepted Answer

A)  RecoverPoint will roll back (or forward) the snapshots until the selected image is reached. 
B)  RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the storage. 
C)  RecoverPoint will retrieve the snapshot from the Image Access log. 
D)  When Logged Access is disabled, all writes made to the image will be saved to the journal. 
A)  RecoverPoint will roll back (or forward) the snapshots until the selected image is reached. 
B)  RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the storage. 
C)  RecoverPoint will retrieve the snapshot from the Image Access log. 
D)  When Logged Access is disabled, all writes made to the image will be saved to the journal.

Question 17

Where can site planning and other product related documentation be found?

Accepted Answer

A)  support.emc.com 
B)  powerlink.emc.com 
C)  xtremio.com 
D)  Procedure Generator 
A)  support.emc.com 
B)  powerlink.emc.com 
C)  xtremio.com 
D)  Procedure Generator

Question 18

Which element of the GUI displays the user ID who is logged into the cluster?

Accepted Answer

A)  Status Bar 
B)  Menu Bar 
C)  Storage Pane 
D)  Inventory Pane 
A)  Status Bar 
B)  Menu Bar 
C)  Storage Pane 
D)  Inventory Pane

Question 19

In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

Accepted Answer

A)  Test a Copy 
B)  Enable Image Access 
C)  Manage Recovery 
D)  Enable Direct Access 
A)  Test a Copy 
B)  Enable Image Access 
C)  Manage Recovery 
D)  Enable Direct Access

Question 20

What is the minimum percentage of charge of the BBUs required before the cluster can be started for the first time?

Accepted Answer

A)  70% 
B)  80% 
C)  90% 
D)  100% 
A)  70% 
B)  80% 
C)  90% 
D)  100%

You are adding an RPA to a cluster using Deployment Manager. What requirement must be satisfied before proceeding?

What is the maximum number of copies of production data supported with RecoverPoint?

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible?

What is the order of deduplication and compression?

You have VMware SRM with RecoverPoint protection already configured. What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?

Which element of the GUI always displays the cluster you are actively managing?

An alert has been generated. Which document can you examine for more detailed information regarding the error?

What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails. What might be the problem?

What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

Which IP address on the physical XMS should you connect to perform initial configuration?

In which section in the Dashboard is the volume capacity displayed?

A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies. What is the highest frequency available for point-in-time copies in this environment?

Which statement is true about Logged Access mode?

Where can site planning and other product related documentation be found?

Which element of the GUI displays the user ID who is logged into the cluster?

In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

What is the minimum percentage of charge of the BBUs required before the cluster can be started for the first time?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 2: XtremIO Solutions Specialist Exam for Implementation Engineers

You are adding an RPA to a cluster using Deployment Manager. What requirement must be satisfied before proceeding?

What is the maximum number of copies of production data supported with RecoverPoint?

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible?

What is the order of deduplication and compression?

You have VMware SRM with RecoverPoint protection already configured. What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?

Which element of the GUI always displays the cluster you are actively managing?

An alert has been generated. Which document can you examine for more detailed information regarding the error?

What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails. What might be the problem?

What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

Which IP address on the physical XMS should you connect to perform initial configuration?

In which section in the Dashboard is the volume capacity displayed?

A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies. What is the highest frequency available for point-in-time copies in this environment?

Which statement is true about Logged Access mode?

Where can site planning and other product related documentation be found?

Which element of the GUI displays the user ID who is logged into the cluster?

In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

What is the minimum percentage of charge of the BBUs required before the cluster can be started for the first time?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters