Exam 10: Suspension System Service

_______ is the undesired condition produced when, upon hitting a bump, the vehicle darts to one side as the steering linkage is pushed and pulled as a result of the travel of the suspension.

(Multiple Choice)

4.7/5

(40)

Question 21

Unwanted ________ in the suspension system can be extremely dangerous and should be corrected as soon as possible.

(Multiple Choice)

4.8/5

(42)

Question 22

Tech A says that ball joints must be unloaded when checking them for wear. Tech B says that ball joints must be loaded when checking them for wear. Who is correct?

(Multiple Choice)

4.8/5

(45)

Question 23

The vehicle's stabilizer components should be checked ________.

(Multiple Choice)

4.8/5

(32)

Question 24

If making an adjustment to shocks on a vehicle that has adjustable shock absorbers, make sure the shock absorber adjustments are the same for the ________.

(Multiple Choice)

5.0/5

(39)

Question 25

Worn outer tie-rod ends should be removed from the steering arm/knuckle by all of the following, EXCEPT:

(Multiple Choice)

4.8/5

(43)

Question 26

The best method for testing a MacPherson strut suspension with only a lower control arm is to:

(Multiple Choice)

4.9/5

(43)

Question 27

Incorrect angles in the steering linkage due to a component being bent can result in:

(Multiple Choice)

4.8/5

(34)

Question 28

Suspension bushings should not be cracked and should have ____ give when pried against.

(Multiple Choice)

4.9/5

(41)

Question 29

Technician A says torque-steer is caused by low tire pressure. Technician B says steering return concerns may be caused by binding components. Who is correct?

(Multiple Choice)

4.8/5

(38)

Question 30

When diagnosing body sway, inspect the _______.

(Multiple Choice)

4.9/5

(39)

Question 31

On a ________suspension where the coil spring or torsion bar is pushing against the lower control arm, a floor jack must be placed under the lower control arm and the wheel must be raised off the ground.

(Multiple Choice)

4.8/5

(28)

Question 32

Vehicle wander may be caused by what?

(Multiple Choice)

4.8/5

(42)

Question 33

Technician A says that when checking shocks, you should bounce the car. Technician B says that only rear-wheel-drive cars need a shock test. Who is correct?

(Multiple Choice)

5.0/5

(34)

Question 34

All of the following statements with respect to suspension systems are true, except:

(Multiple Choice)

4.9/5

(28)

Question 35

A driver should not need to keep manipulating the steering wheel to maintain the vehicle in a _________ on straight, level roads.

(Multiple Choice)

4.8/5

(40)

Question 36

________ is a pull that occurs during heavy acceleration.

(Multiple Choice)

4.8/5

(28)

Question 37

When checking for a faulty shock absorber, you should look for:

(Multiple Choice)

4.8/5

(37)

Question 38

A vehicle will pull to the side with the ________ camber.

(Multiple Choice)

4.8/5

(41)

Question 39

You can check for noises in all these ways EXCEPT:

(Multiple Choice)

4.8/5

(37)

Question 40

Showing 21 - 40 of 40

_______ is the undesired condition produced when, upon hitting a bump, the vehicle darts to one side as the steering linkage is pushed and pulled as a result of the travel of the suspension.

Unwanted ________ in the suspension system can be extremely dangerous and should be corrected as soon as possible.

Tech A says that ball joints must be unloaded when checking them for wear. Tech B says that ball joints must be loaded when checking them for wear. Who is correct?

The vehicle's stabilizer components should be checked ________.

If making an adjustment to shocks on a vehicle that has adjustable shock absorbers, make sure the shock absorber adjustments are the same for the ________.

Worn outer tie-rod ends should be removed from the steering arm/knuckle by all of the following, EXCEPT:

The best method for testing a MacPherson strut suspension with only a lower control arm is to:

Incorrect angles in the steering linkage due to a component being bent can result in:

Suspension bushings should not be cracked and should have ____ give when pried against.

Technician A says torque-steer is caused by low tire pressure. Technician B says steering return concerns may be caused by binding components. Who is correct?

When diagnosing body sway, inspect the _______.

On a ________suspension where the coil spring or torsion bar is pushing against the lower control arm, a floor jack must be placed under the lower control arm and the wheel must be raised off the ground.

Vehicle wander may be caused by what?

Technician A says that when checking shocks, you should bounce the car. Technician B says that only rear-wheel-drive cars need a shock test. Who is correct?

All of the following statements with respect to suspension systems are true, except:

A driver should not need to keep manipulating the steering wheel to maintain the vehicle in a _________ on straight, level roads.

________ is a pull that occurs during heavy acceleration.

When checking for a faulty shock absorber, you should look for:

A vehicle will pull to the side with the ________ camber.

You can check for noises in all these ways EXCEPT:

Strategy-Based Diagnostics

Safety

Basic Tools and Precision Measuring

Fasteners and Thread Repair

Wheels and Tires

Tire Pressure Monitoring Systems

Tire and Wheel Diagnosis and Service

Wheel Bearing and Seal Service

Suspension Systems

Steering Systems

Steering Diagnosis and Service

Wheel Alignment Principles

Drive Axle Shafts and Cv Joints

Wheel Alignment Adjustments

Filters