Question 1

For First class building drawing room and dining room floors shall be of _____________

Accepted Answer

A) concrete 
B) tiles 
C) mosaic 
D) wooden 
A) concrete 
B) tiles 
C) mosaic 
D) wooden C

Question 2

For 2nd class building rain water pipes shall be of _____________finished painted.

Accepted Answer

A) cast iron 
B) bog iron 
C) brown ore 
D) pyrite 
A) cast iron 
B) bog iron 
C) brown ore 
D) pyrite A

Question 3

For first class building the foundation and plinth shall be of 1st class brickwork in lime mortar or 1:2 cement mortar over lime concrete or 1:6:7 cement concrete.

Accepted Answer

A) True 
 B)False  False

Question 4

General specification gives the nature and the class of the work and the materials in general terms.

Accepted Answer

A) True 
 B)False

Question 5

The quantity of coarse aggregate required for RCC (1:3:6) for 20 cubic metres of work is___________

Accepted Answer

A) 18.24 m3 
B) 15.23 m3 
C) 24.87 m3 
D) 32.45 m3 
A) 18.24 m3 
B) 15.23 m3 
C) 24.87 m3 
D) 32.45 m3

Question 6

For third class building flooring shall be of brick-on-edge floor over well rammed earth.

Accepted Answer

A) True 
 B)False

Question 7

For 2nd class building superstructure shall be of 1st class brickwork in lime mortar.

Accepted Answer

A) True 
 B)False

Question 8

The water proof mud- plaster consists of

Accepted Answer

A) soil 
B) janta emulsion 
C) cowdung 
D) soil, janta emulsion and cowdung 
A) soil 
B) janta emulsion 
C) cowdung 
D) soil, janta emulsion and cowdung

Question 9

It is often difficult to estimate size at an early stage in a project when only a specification is available

Accepted Answer

A) True 
 B)False

Question 10

The unit of payment of cement concrete in lintels is_____________

Accepted Answer

A) per sqm 
B) per cum 
C) quintal 
D) kilograms 
A) per sqm 
B) per cum 
C) quintal 
D) kilograms

Question 11

The brick work is not measured in cu m in case of _____________

Accepted Answer

A) one or more than one brick wall 
B) brick work in arches 
C) reinforced brick work 
D) half brick wall 
A) one or more than one brick wall 
B) brick work in arches 
C) reinforced brick work 
D) half brick wall

Question 12

For fourth class building the doors and windows shall be of_____________wood or country wood.

Accepted Answer

A) sal 
B) neem 
C) teak 
D) mango 
A) sal 
B) neem 
C) teak 
D) mango

Question 13

The quantity of sand required for RCC (1:2:4) for 15 cubic metres of work is

Accepted Answer

A) 4.76 m3 
B) 10.32 m3 
C) 8.43 m3 
D) 6.51 m3 
A) 4.76 m3 
B) 10.32 m3 
C) 8.43 m3 
D) 6.51 m3

Question 14

The specifications are written in a language so that they indicate what the work should be and words "shall be" or "should be" are used.

Accepted Answer

A) True 
 B)False

Question 15

Specification does not specify or describes the nature and the class off the work, materials to be used in the work, workmanship, etc.

Accepted Answer

A) True 
 B)False

Question 16

Which of the following are parameters involved in computing the total cost of a software development project?

Accepted Answer

A) hardware and software costs 
B) effort costs 
C) travel and training costs 
D) all of the mentioned 
A) hardware and software costs 
B) effort costs 
C) travel and training costs 
D) all of the mentioned

Question 17

The roofing cannot be made with slate.

Accepted Answer

A) True 
 B)False

Question 18

Which of the following costs is not part of the total effort cost?

Accepted Answer

A) costs of networking and communications 
B) costs of providing heating and lighting office space 
C) costs of lunch time food 
D) costs of support staff 
A) costs of networking and communications 
B) costs of providing heating and lighting office space 
C) costs of lunch time food 
D) costs of support staff

Question 19

What is related to the overall functionality of the delivered software?

Accepted Answer

A) function-related metrics 
B) product-related metrics 
C) size-related metrics 
D) none of the mentioned 
A) function-related metrics 
B) product-related metrics 
C) size-related metrics 
D) none of the mentioned

Question 20

The excavation exceeding 1.5 m in width and 10 sq. m in plan area with a depth not exceeding 30 cm, is termed as _____________

Accepted Answer

A) excavation 
B) surface dressing 
C) surface excavation 
D) cutting 
A) excavation 
B) surface dressing 
C) surface excavation 
D) cutting

For First class building drawing room and dining room floors shall be of _____________

For 2nd class building rain water pipes shall be of _____________finished painted.

For first class building the foundation and plinth shall be of 1st class brickwork in lime mortar or 1:2 cement mortar over lime concrete or 1:6:7 cement concrete.

General specification gives the nature and the class of the work and the materials in general terms.

The quantity of coarse aggregate required for RCC (1:3:6) for 20 cubic metres of work is___________

For third class building flooring shall be of brick-on-edge floor over well rammed earth.

For 2nd class building superstructure shall be of 1st class brickwork in lime mortar.

The water proof mud- plaster consists of

It is often difficult to estimate size at an early stage in a project when only a specification is available

The unit of payment of cement concrete in lintels is_____________

The brick work is not measured in cu m in case of _____________

For fourth class building the doors and windows shall be of_____________wood or country wood.

The quantity of sand required for RCC (1:2:4) for 15 cubic metres of work is

The specifications are written in a language so that they indicate what the work should be and words "shall be" or "should be" are used.

Specification does not specify or describes the nature and the class off the work, materials to be used in the work, workmanship, etc.

Which of the following are parameters involved in computing the total cost of a software development project?

The roofing cannot be made with slate.

Which of the following costs is not part of the total effort cost?

What is related to the overall functionality of the delivered software?

The excavation exceeding 1.5 m in width and 10 sq. m in plan area with a depth not exceeding 30 cm, is termed as _____________

Construction and Costing Projects

Septic Tanks, Soil Plasticity, and Structures for Water Flow

Structures, Equipment, and Materials Used in Construction

Construction Techniques, Reports, and Cyber Crimes

Cyber-Crimes, Quotations, Tenders, and Contract Law

Reverse Engineering and Cost Estimation in Construction Industry

Filters

Exam 4: Construction and Software Development Project Management

For First class building drawing room and dining room floors shall be of _____________

For 2nd class building rain water pipes shall be of _____________finished painted.

For first class building the foundation and plinth shall be of 1st class brickwork in lime mortar or 1:2 cement mortar over lime concrete or 1:6:7 cement concrete.

General specification gives the nature and the class of the work and the materials in general terms.

The quantity of coarse aggregate required for RCC (1:3:6) for 20 cubic metres of work is___________

For third class building flooring shall be of brick-on-edge floor over well rammed earth.

For 2nd class building superstructure shall be of 1st class brickwork in lime mortar.

The water proof mud- plaster consists of

It is often difficult to estimate size at an early stage in a project when only a specification is available

The unit of payment of cement concrete in lintels is_____________

The brick work is not measured in cu m in case of _____________

For fourth class building the doors and windows shall be of_____________wood or country wood.

The quantity of sand required for RCC (1:2:4) for 15 cubic metres of work is

The specifications are written in a language so that they indicate what the work should be and words "shall be" or "should be" are used.

Specification does not specify or describes the nature and the class off the work, materials to be used in the work, workmanship, etc.

Which of the following are parameters involved in computing the total cost of a software development project?

The roofing cannot be made with slate.

Which of the following costs is not part of the total effort cost?

What is related to the overall functionality of the delivered software?

The excavation exceeding 1.5 m in width and 10 sq. m in plan area with a depth not exceeding 30 cm, is termed as _____________

Construction and Costing Projects

Septic Tanks, Soil Plasticity, and Structures for Water Flow

Structures, Equipment, and Materials Used in Construction

Construction Techniques, Reports, and Cyber Crimes

Cyber-Crimes, Quotations, Tenders, and Contract Law

Reverse Engineering and Cost Estimation in Construction Industry

Filters