Exam 13: Exposure Technique Selection

arrow
  • Select Tags
search iconSearch Question
flashcardsStudy Flashcards
  • Select Tags

Using a lower mA station during an AEC examination results in

(Multiple Choice)
4.8/5
(36)

When your patient for an AP abdomen is very heavy,using AEC results in

(Multiple Choice)
4.8/5
(40)

When the radiographer has the opportunity to set the back-up time,it should be approximately _____________ of the expected exposure time

(Multiple Choice)
4.7/5
(38)

When using AEC with digital imaging,errors resulting in overexposure to the IR result in

(Multiple Choice)
4.9/5
(41)

With digital imaging using AEC,if an AP thoracic spine is imaged with the central ray passing 3 inches to the right of the spine,the brightness in the area of interest is __________________ and the exposure time is ________________________.(Assume all other factors are appropriate. )

(Multiple Choice)
4.9/5
(35)

With digital imaging using AEC,if an AP thoracic spine is imaged with the density setting changed from 0 to -2,the brightness in the area of interest is __________________ and the ____________ is increased.(Assume all other factors are appropriate. )

(Multiple Choice)
5.0/5
(38)

Which of the following is the most critical aspect of successfully performing an examination using AEC?

(Multiple Choice)
4.9/5
(29)

Ionization chamber AEC detectors are entrance-type devices because the x-rays must

(Multiple Choice)
4.9/5
(38)

AEC controls the amount of radiation reaching the IR by controlling the

(Multiple Choice)
4.8/5
(40)

The maximum length of time that an exposure lasts when using AEC is the

(Multiple Choice)
4.9/5
(28)

With digital imaging using AEC,if an AP thoracic spine is imaged using 110 kVp instead of 80 kVp,the brightness in the area of interest is __________________ and the patient exposure is ________________________.(Assume all other factors are appropriate. )

(Multiple Choice)
4.7/5
(38)

When using AEC,the kVp

(Multiple Choice)
4.7/5
(38)

Once a part has been selected using APR,the exposure factors cannot be adjusted.

(True/False)
4.8/5
(38)

With film-screen imaging using AEC,if an AP thoracic spine is imaged with the density setting changed from 0 to +2,the density in the area of interest will be __________________ and the exposure time will be ________________________.(Assume all other factors are appropriate. )

(Multiple Choice)
4.9/5
(37)

The mAs readout is of little value because there is no need to set manual exposure factors.

(True/False)
4.8/5
(43)

If the patient for an AP thoracic spine image is centered so that the spine is not over the top of the detector

(Multiple Choice)
4.9/5
(41)

An ionization chamber is a hollow cell that contains

(Multiple Choice)
4.7/5
(37)

With film-screen imaging using AEC,if an AP thoracic spine is imaged using an outside instead of center detector,the density in the area of interest will be __________________ and the patient will be ________________________.(Assume all other factors are appropriate. )

(Multiple Choice)
4.9/5
(36)

If an AEC has three detectors,only one of the three can be selected for an exposure.

(True/False)
4.7/5
(38)

The actual amount of exposure used for an image when AEC is being used is the

(Multiple Choice)
4.9/5
(38)
Showing 21 - 40 of 63
close modal

Filters

  • Essay(0)
  • Multiple Choice(0)
  • Short Answer(0)
  • True False(0)
  • Matching(0)