Exam 3: Describing Logic Circuits
Exam 1: Introductory Concepts69 Questions
Exam 2: Number Systems and Codes81 Questions
Exam 3: Describing Logic Circuits92 Questions
Exam 4: Combinational Logic Circuits81 Questions
Exam 5: Flip-Flops and Related Devices80 Questions
Exam 6: Digital Arithmetic: Operations and Circuits74 Questions
Exam 7: Counters and Registers75 Questions
Exam 8: Integrated-Circuit Logic Families104 Questions
Exam 9: MSI Logic Circuits78 Questions
Exam 10: Digital System Projects Using HDL77 Questions
Exam 11: Interfacing With the Analog World91 Questions
Exam 12: Memory Devices116 Questions
Exam 13: Programmable Logic Device Architectures41 Questions
Select questions type
The output from a logic gate changes at the same instant that the input to the gate changes.
(True/False)
4.8/5
(36)
-If we use DeMorgan's theorem to simplify the output expression for the circuit in Figure 3-1, we get:

(Multiple Choice)
5.0/5
(33)
To change a logic gate to its alternate representation, a simple three- step process is followed.
(True/False)
4.9/5
(38)
A logic control system in an automobile generates an audible alarm when any one, two, or three of the following three conditions occur: 1. The ignition is off but the ignition key has not been removed from the switch and a door is opened.
2. The headlamp switch is on with the ignition off and the key removed from the switch.
3. The ignition is on with the engine running but the driver's seatbelt has not been fastened.
Detection circuits generate HIGH inputs to a 3- input logic gate when any of these conditions occurs. The logic gate responds to the high input(s) by generating a HIGH output that triggers the alarm. The 3- input logic gate is most likely a(n):
(Multiple Choice)
4.8/5
(44)
The output from a_______ gate is HIGH (1) only when all inputs are LOW (0).
(Short Answer)
4.8/5
(47)
Which of the following accurately describes the logic circuit for the Boolean expression AB + BCD?
(Multiple Choice)
4.9/5
(40)
The output of a three input (A, B, and C) AND gate is connected to a two input OR gate. A second input to the OR gate is labeled D. The Boolean expression representing this logic circuit is:
(Multiple Choice)
4.9/5
(37)
Which of the following statements best describes the function of the logic variable X?
(Multiple Choice)
4.8/5
(42)
How many NAND gates would be required to perform the OR operation if two inputs are required?
(Multiple Choice)
4.9/5
(34)
The_______laws indicate that the order in which variables are ORed or ANDed is unimportant.
(Short Answer)
4.9/5
(42)
A certain printer requires that all of the following conditions be satisfied before it will send a HIGH to a microprocessor acknowledging that it is ready to print: 1. The printer's electronic circuits must be energized.
2. Paper must be loaded and ready to advance.
3. The printer must be "on line" with the microprocessor.
As each of the above conditions is satisfied, a HIGH is generated and applied to a 3- input logic gate. When all three conditions are met, the logic gate produces a HIGH output indicating readiness to print. The basic logic gate used in this circuit would be a(n):
(Multiple Choice)
4.9/5
(36)
The basic logic gate that must have all of its inputs HIGH to have a high output is the:
(Multiple Choice)
4.7/5
(26)
Basic operations in Boolean algebra are called_______operations.
(Short Answer)
4.8/5
(31)
A small circle on the output of a logic gate is used to represent the:
(Multiple Choice)
4.7/5
(45)
A tennis player is waiting to receive a serve from their opponent. The opponent hits the
ball to the outside of the service court. The time it takes for the player to process the visual information and then begin to move in the direction of the serve is an example of _______.
(Short Answer)
4.9/5
(35)
Showing 61 - 80 of 92
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)