Question 1

Describe the border of a sheet.

Accepted Answer

. The border is the format margin of a sheet, usually between the edges of the sheet to borderlines. The borderlines form a rectangle to establish the border.

Question 2

Give the purpose of the angle of projection block.

Accepted Answer

. The angle of projection block specifies how to interpret a drawing according to the method of view projection.

Question 3

Where do the ASME standards recommend placing the title block?

Accepted Answer

. In the lower-right corner of sheet borderlines.

Question 4

Give another name for photocopy printers when used in an engineering environment, and briefly describe their function.

Accepted Answer

. Photocopy printers are also known as e

Question 5

How is the 50 scale on the mechanical engineer's scale calibrated?

Accepted Answer

. The 50 scale is for scaling

Question 6

Give the purpose of the sheet block in the title block and show how two multiple sheets are identified.

Accepted Answer

The answer of Give the purpose of the sheet block...

Question 7

What does the zoning location D4 mean?

Accepted Answer

. The item can be fo

Question 8

Identify the basic function of a scale.

Accepted Answer

A scale establishes a proporti

Question 9

Describe the function of the revision status of sheets block and when it is used.

Accepted Answer

. A revision status of sheets block, sho

Question 10

State the general note that all engineering drawings shall have as related the linear units used on the drawing.

Accepted Answer

. A general note stating UNLES

Question 11

Define brainstorming.

Accepted Answer

Brainstorming is a problem-sol

Question 12

Identify the purpose of the sheet size designation in the title block and give an example.

Accepted Answer

. Identifies the she

Question 13

Define zoning.

Accepted Answer

. Zoning is a system of number

Question 14

Define the instrument called a scale.

Accepted Answer

A scale is an instrument with

Question 15

How do you specify a full scale when using inches?

Accepted Answer

The answer of How do you specify a full scale...

Question 16

What has replaced the traditional drafting practice using pencil or ink on a medium such as paper or polyester film with the support of drafting instruments and equipment?

Accepted Answer

Computer-a

Question 17

Name the ASME standards that recommend sheet sizes and format.

Accepted Answer

. The ASME documents ASME Y14.

Question 18

Describe the revision history block and identify its location.

Accepted Answer

. The revision history block, also calle

Question 19

Give at least two examples of how the scale is identified in the title block and what is specified if the drawing has no scale.

Accepted Answer

The answer of Give at least two examples of how...

Question 20

Explain how optimum efficiency of design and manufactur- ing methods is achieved without producing a single paper copy of a drawing of a part.

Accepted Answer

. The optimal efficiency of design and m

Exam 2: Drafting Equipment, Media, and Reproduction Methods

Describe the border of a sheet.

Give the purpose of the angle of projection block.

Where do the ASME standards recommend placing the title block?

Give another name for photocopy printers when used in an engineering environment, and briefly describe their function.

How is the 50 scale on the mechanical engineer's scale calibrated?

Give the purpose of the sheet block in the title block and show how two multiple sheets are identified.

What does the zoning location D4 mean?

Identify the basic function of a scale.

Describe the function of the revision status of sheets block and when it is used.

State the general note that all engineering drawings shall have as related the linear units used on the drawing.

Define brainstorming.

Identify the purpose of the sheet size designation in the title block and give an example.

Define zoning.

Define the instrument called a scale.

How do you specify a full scale when using inches?

What has replaced the traditional drafting practice using pencil or ink on a medium such as paper or polyester film with the support of drafting instruments and equipment?

Name the ASME standards that recommend sheet sizes and format.

Describe the revision history block and identify its location.

Give at least two examples of how the scale is identified in the title block and what is specified if the drawing has no scale.

Explain how optimum efficiency of design and manufactur- ing methods is achieved without producing a single paper copy of a drawing of a part.

Introduction to Engineering Drawing and Design Test

Computer-Aided Design and Drafting Cadd

Manufacturing Materials and Processes

Sketching Applications

Lines and Lettering

Drafting Geometry

Multiviews

Auxiliary Views

Dimensioning

Fasteners and

Sections, Revolutions, and Conventional Breaks

Geometric Dimensioning and Tolerancing

Pictorial Drawings and Technical Illustrations

Working Drawings

Mechanisms: Linkages, Cams, Gears, and Bearings

Belt and Chain Drives

Welding Processes and Representations

Precision Sheet Metal Drafting

Electrical and Electronic Drafting

Industrial Process Piping

Structural Drafting

Heating, Ventilating, and Air-Conditioning Hvac, and Pattern Development

Civil Drafting Problems

Filters