Exam 2: Job-Order Costing: Calculating Unit Product Costs

Deloria Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T288. The following data were recorded for this job: The total job cost for Job T288 is closest to: (Round your intermediate calculations to 2 decimal places.)

Marder Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated jointer. Additional information is provided below for the most recent month: Required:a. Calculate the predetermined overhead rate based on capacity.b. Calculate the manufacturing overhead applied.c. Determine the Gross Margin for the month.d. Calculate the cost of unused capacity.

The management of Winterroth Corporation would like to investigate the possibility of basing its predetermined overhead rate on activity at capacity. The Corporation's controller has provided an example to illustrate how this new system would work. In this example, the allocation base is machine-hours. If the Corporation bases its predetermined overhead rate on capacity, then as shown on the income statement prepared for internal management purposes, the cost of unused capacity would be closest to:

Feauto Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs). The company has two products, I63E and E76I, about which it has provided the following data: The company's estimated total manufacturing overhead for the year is $2,063,250 and the company's estimated total direct labor-hours for the year is 45,000.The company is considering using a form of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: The manufacturing overhead that would be applied to a unit of product I63E under the company's traditional costing system is closest to:

Sutter Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T369 was completed with the following characteristics: If the company marks up its unit product costs by 20% then the selling price for a unit in Job T369 is closest to: (Round your intermediate calculations to 2 decimal places.)

Trevigne Corporation uses a predetermined overhead rate base on machine-hours that it recalculates at the beginning of each year. The company has provided the following data for the most recent year. Required:Determine the amount of manufacturing overhead that would have been applied to all jobs during the period.

Kostelnik Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $237,000, variable manufacturing overhead of $3.90 per machine-hour, and 30,000 machine-hours. The company has provided the following data concerning Job A496 which was recently completed: If the company marks up its unit product costs by 40% then the selling price for a unit in Job A496 is closest to: (Round your intermediate calculations to 2 decimal places.)

Job cost sheets contain entries for actual direct material, actual direct labor, and actual manufacturing overhead cost incurred in completing a job.

Pasko Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently Job P660 was completed with the following characteristics: Required:Calculate the selling price for Job P660 if the company marks up its unit product costs by 20%.

Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: The total job cost for Job A477 is closest to: (Round your intermediate calculations to 2 decimal places.)

Levi Corporation uses a predetermined overhead rate of $23.40 per direct labor-hour. This predetermined overhead rate was based on estimated total fixed manufacturing overhead of $702,000 and 30,000 direct labor-hours for the period. The company incurred actual total fixed manufacturing overhead of $738,000 and 27,100 total direct labor-hours during the period.Required:Determine the amount of manufacturing overhead that would have been applied to all jobs during the period.

The management of Bullinger Corporation would like to investigate the possibility of basing its predetermined overhead rate on activity at capacity. The company's controller has provided an example to illustrate how this new system would work. In this example, the allocation base is machine-hours and the estimated amount of the allocation base for the upcoming year is 11,000 machine-hours. Capacity is 14,000 machine-hours and the actual level of activity for the year is assumed to be 9,700 machine-hours. All of the manufacturing overhead is fixed and both the estimated amount at the beginning of the year and the actual amount at the end of the year are assumed to be $15,070 per year. For simplicity, it is assumed that this is the estimated manufacturing overhead for the year as well as the manufacturing overhead at capacity. It is further assumed that this is also the actual amount of manufacturing overhead for the year.If the company bases its predetermined overhead rate on the estimated amount of the allocation base for the upcoming year, then the predetermined overhead rate is closest to:

Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A460. The following data were recorded for this job: The amount of overhead applied in the Forming Department to Job A460 is closest to: (Round your intermediate calculations to 2 decimal places.)

Matrejek Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job D and Job K. There were no beginning inventories. Data concerning those two jobs follow: Required:a. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices. Calculate the selling price for Job D.b. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices. Calculate the selling price for Job K.c. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. Further assume that the company uses a markup of 50% on manufacturing cost to establish selling prices. Calculate the selling price for Job D.d. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. Further assume that the company uses a markup of 50% on manufacturing cost to establish selling prices. Calculate the selling price for Job K.

Vasilopoulos Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A182. The following data were recorded for this job: Required:a. Calculate the estimated total manufacturing overhead for the Casting Department.b. Calculate the estimated total manufacturing overhead for the Assembly Department.c. Calculate the predetermined overhead rate for the Casting Department.d. Calculate the predetermined overhead rate for the Assembly Department.e. Calculate the total amount of overhead applied to Job A182 in both departments.f. Calculate the total job cost for Job A182.g. Calculate the selling price for Job A182 if the company marks up its unit product costs by 20% to determine selling prices.

Poma Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs). The company has two products, R78S and N32Y, about which it has provided the following data: The company's estimated total manufacturing overhead for the year is $1,427,040 and the company's estimated total direct labor-hours for the year is 24,000.The company is considering using a variation of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: The unit product cost of product R78S under the company's traditional costing system is closest to:

Spang Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P505 was completed with the following characteristics: The total job cost for Job P505 is closest to:

Cardosa Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on 70,000 machine-hours, total fixed manufacturing overhead cost of $308,000, and a variable manufacturing overhead rate of $2.10 per machine-hour. Job M556, which was for 50 units of a custom product, was recently completed. The job cost sheet for the job contained the following data: Required:a. Calculate the total job cost for Job M556.b. Calculate the unit product cost for Job M556.

Ronson Corporation has two manufacturing departments--Casting and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job G. There were no beginning inventories. Data concerning those two jobs follow: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. The total manufacturing cost assigned to Job G is closest to: (Round your intermediate calculations to 2 decimal places.)

Coble Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated shaper. Additional information is provided below for the most recent month: The gross margin that would be reported on the income statement prepared for internal management purposes would be closest to: