Question 1

A stabilizer bar reduces body sway when a front wheel strikes a road irregularity.

Accepted Answer

A) True 
 B)False  True

Question 2

Class A, B, and C fires may be extinguished using a multipurpose dry chemical fire extinguisher.

Accepted Answer

A) True 
 B)False  True

Question 3

Class C fires involve the burning of electrical equipment.

Accepted Answer

A) True 
 B)False  True

Question 4

Substance abuse may affect reaction time.

Accepted Answer

A) True 
 B)False

Question 5

When using a bench grinder on a small part, hold the part in your hand.

Accepted Answer

A) True 
 B)False

Question 6

On a parallelogram steering linkage, the center link is supported by the pitman arm and what other component?

Accepted Answer

The answer of On a parallelogram steering linkage, the center...

Question 7

Water may be used to extinguish a gasoline fire.

Accepted Answer

A) True 
 B)False

Question 8

Technician A says gasoline containers should be completely filled with gasoline to eliminate air from the container. Technician B says gasoline containers should be stored in a non-ventilated area. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B 
A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B

Question 9

Describe thrust bearing loads.

Accepted Answer

Thrust bearing loads are suppl

Question 10

All of the following statements about wheel rims are true EXCEPT:

Accepted Answer

A)  A wheel rim with negative offset has the center of the tire positioned inboard from the vertical wheel mounting surface 
B)  Wheel rims must position the tires at the proper distance inward or outward from the vertical wheel mounting surface 
C)  A wheel rim with positive offset has the center of the tire positioned outboard from the vertical wheel mounting surface 
D)  A wheel rim with negative offset has the center of the tire positioned outboard from the vertical wheel mounting surface 
A)  A wheel rim with negative offset has the center of the tire positioned inboard from the vertical wheel mounting surface 
B)  Wheel rims must position the tires at the proper distance inward or outward from the vertical wheel mounting surface 
C)  A wheel rim with positive offset has the center of the tire positioned outboard from the vertical wheel mounting surface 
D)  A wheel rim with negative offset has the center of the tire positioned outboard from the vertical wheel mounting surface

Question 11

All of the following statements about the recirculating ball steering gears are true EXCEPT:

Accepted Answer

A)  Can be manual-type with no hydraulic assist 
B)  Are used with parallelogram steering linkage 
C)  Can be power-type with hydraulic assist from the power steering pump 
D)  The lower end of the sector shaft is splined to the tie-rod end 
A)  Can be manual-type with no hydraulic assist 
B)  Are used with parallelogram steering linkage 
C)  Can be power-type with hydraulic assist from the power steering pump 
D)  The lower end of the sector shaft is splined to the tie-rod end

Question 12

Hazardous materials are being discussed. Technician A says a solid that ignites spontaneously is considered a hazardous material. Technician B says a liquid with a flash point below 140°F (60°C) is considered a hazardous material. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B 
A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B

Question 13

What are the inner tie-rod ends of a rack and pinion steering gear attached to?

Accepted Answer

The inner end of the inner tie

Question 14

What can irradiation eye burns be caused by?

Accepted Answer

From looki

Question 15

Shock absorbers control spring action and help to prevent:

Accepted Answer

A)  Wheel oscillations 
B)  Slow steering wheel return after a turn 
C)  Excessive steering effort 
D)  Improper wheel and tire position 
A)  Wheel oscillations 
B)  Slow steering wheel return after a turn 
C)  Excessive steering effort 
D)  Improper wheel and tire position

Question 16

Many vehicles have a rack and pinion steering system.

Accepted Answer

A) True 
 B)False

Question 17

What are the two power sources for the power train on a typical hybrid vehicle?

Accepted Answer

Gasoline e

Question 18

The use of power tools is being discussed. Technician A says to read the operating instructions before using a power tool. Technician B says eye protection must be worn at all times during power tool operation. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B 
A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B

Question 19

What type of gloves are required when servicing a hybrid vehicles electrical system?

Accepted Answer

1,000 volt, class-0

Question 20

Technician A says to lift heavy objects by bending at the knees and keep your back straight and lift with your legs. Technician B says when lifting a heavy object, hold the object as far from your body as possible. Who is correct?

Accepted Answer

A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B 
A)  A only 
B)  B only 
C)  Both A and B 
D)  Neither A nor B

A stabilizer bar reduces body sway when a front wheel strikes a road irregularity.

Class A, B, and C fires may be extinguished using a multipurpose dry chemical fire extinguisher.

Class C fires involve the burning of electrical equipment.

Substance abuse may affect reaction time.

When using a bench grinder on a small part, hold the part in your hand.

On a parallelogram steering linkage, the center link is supported by the pitman arm and what other component?

Water may be used to extinguish a gasoline fire.

Technician A says gasoline containers should be completely filled with gasoline to eliminate air from the container. Technician B says gasoline containers should be stored in a non-ventilated area. Who is correct?

Describe thrust bearing loads.

All of the following statements about wheel rims are true EXCEPT:

All of the following statements about the recirculating ball steering gears are true EXCEPT:

Hazardous materials are being discussed. Technician A says a solid that ignites spontaneously is considered a hazardous material. Technician B says a liquid with a flash point below 140°F (60°C) is considered a hazardous material. Who is correct?

What are the inner tie-rod ends of a rack and pinion steering gear attached to?

What can irradiation eye burns be caused by?

Shock absorbers control spring action and help to prevent:

Many vehicles have a rack and pinion steering system.

What are the two power sources for the power train on a typical hybrid vehicle?

The use of power tools is being discussed. Technician A says to read the operating instructions before using a power tool. Technician B says eye protection must be worn at all times during power tool operation. Who is correct?

What type of gloves are required when servicing a hybrid vehicles electrical system?

Technician A says to lift heavy objects by bending at the knees and keep your back straight and lift with your legs. Technician B says when lifting a heavy object, hold the object as far from your body as possible. Who is correct?

Basic Theories

Tires and Wheels

Wheel Bearings

Shock Absorbers and Struts

Front Suspension Systems

Rear Suspension Systems

Steering Columns and Steering Linkage Mechanisms

Four Wheel Alignment Part 1 Primary Angles

Four Wheel Alignment Part 2 Diagnostic Angles and Frame Damage

Computer Controlled Suspension Systems

Power Steering Pumps

Rack and Pinion Steering Gears and Four Wheel Steering

Recirculating Ball Steering Gears

Filters

Exam 1: Suspension and Steering Systems

A stabilizer bar reduces body sway when a front wheel strikes a road irregularity.

Class A, B, and C fires may be extinguished using a multipurpose dry chemical fire extinguisher.

Class C fires involve the burning of electrical equipment.

Substance abuse may affect reaction time.

When using a bench grinder on a small part, hold the part in your hand.

On a parallelogram steering linkage, the center link is supported by the pitman arm and what other component?

Water may be used to extinguish a gasoline fire.

Technician A says gasoline containers should be completely filled with gasoline to eliminate air from the container. Technician B says gasoline containers should be stored in a non-ventilated area. Who is correct?

Describe thrust bearing loads.

All of the following statements about wheel rims are true EXCEPT:

All of the following statements about the recirculating ball steering gears are true EXCEPT:

Hazardous materials are being discussed. Technician A says a solid that ignites spontaneously is considered a hazardous material. Technician B says a liquid with a flash point below 140°F (60°C) is considered a hazardous material. Who is correct?

What are the inner tie-rod ends of a rack and pinion steering gear attached to?

What can irradiation eye burns be caused by?

Shock absorbers control spring action and help to prevent:

Many vehicles have a rack and pinion steering system.

What are the two power sources for the power train on a typical hybrid vehicle?

The use of power tools is being discussed. Technician A says to read the operating instructions before using a power tool. Technician B says eye protection must be worn at all times during power tool operation. Who is correct?

What type of gloves are required when servicing a hybrid vehicles electrical system?

Technician A says to lift heavy objects by bending at the knees and keep your back straight and lift with your legs. Technician B says when lifting a heavy object, hold the object as far from your body as possible. Who is correct?

Basic Theories

Tires and Wheels

Wheel Bearings

Shock Absorbers and Struts

Front Suspension Systems

Rear Suspension Systems

Steering Columns and Steering Linkage Mechanisms

Four Wheel Alignment Part 1 Primary Angles

Four Wheel Alignment Part 2 Diagnostic Angles and Frame Damage

Computer Controlled Suspension Systems

Power Steering Pumps

Rack and Pinion Steering Gears and Four Wheel Steering

Recirculating Ball Steering Gears

Filters