Question 1

To enter privileged EXEC, you can type the ____ command at the user mode prompt.

Accepted Answer

A)  sudo 
B)  setup 
C)  enable 
D)  privileged 
A)  sudo 
B)  setup 
C)  enable 
D)  privileged C

Question 2

You can turn off the enhanced editing features by typing ____________________ at either the user EXEC or the privileged EXEC prompts.

Accepted Answer

terminal no editing

Question 3

What are some of the tasks that can be performed at the privileged EXEC mode?

Accepted Answer

Most router configuration takes place in router modes beyond privileged EXEC mode; however, you can do a few things at this prompt to substantially affect router operations:
• Setup -The setup command will cause the router to enter the system configuration dialog, which allows the router to be completely reconfigured.
• Copy -Configurations can be copied from TFTP servers to the router and therefore change the router configuration.
• Erase -Configuration files as well as the entire IOS can be erased.

Question 4

If you want to remove the enable secret password, you can type ____ at the global configuration mode prompt.

Accepted Answer

A)  enable secret off 
B)  enable off 
C)  no enable secret 
D)  no secret 
A)  enable secret off 
B)  enable off 
C)  no enable secret 
D)  no secret

Question 5

What are some of the types of interfaces in a Cisco router?

Accepted Answer

A router can ship with a variety of conf

Question 6

The startup configuration file for the router is stored in ____ by default.

Accepted Answer

A)  NVRAM 
B)  ROM 
C)  flash memory 
D)  DRAM 
A)  NVRAM 
B)  ROM 
C)  flash memory 
D)  DRAM

Question 7

The editing command ____ moves the cursor to the end of the current line.

Accepted Answer

A)  Ctrl+E 
B)  Ctrl+F 
C)  Esc+B 
D)  Esc+F 
A)  Ctrl+E 
B)  Ctrl+F 
C)  Esc+B 
D)  Esc+F

Question 8

With ____ configuration mode, you can configure the virtual terminals, console, and AUX lines that let you access the router.

Accepted Answer

A)  global 
B)  interface 
C)  router 
D)  line 
A)  global 
B)  interface 
C)  router 
D)  line

Question 9

Network administrators typically access the router directly through the console port (also known as the ____) located on the back of the router.

Accepted Answer

A)  DB-9 
B)  VTY 
C)  console 
D)  AUX 
A)  DB-9 
B)  VTY 
C)  console 
D)  AUX

Question 10

____ contains the working copy of the current Cisco IOS and is the component that initializes the IOS for normal router operations.

Accepted Answer

A)  ROM 
B)  Flash memory 
C)  DRAM 
D)  NVRAM 
A)  ROM 
B)  Flash memory 
C)  DRAM 
D)  NVRAM

Question 11

Use the ____ command in enable mode to configure the time.

Accepted Answer

A)  clock set 
B)  time set 
C)  clock on 
D)  time on 
A)  clock set 
B)  time set 
C)  clock on 
D)  time on

Question 12

Describe a router's flash memory.

Accepted Answer

Flash memory is a type of erasable, prog

Question 13

Match between columns
                        Premises: helps you remember which network the interface services
allows you to configure the Ethernet and serial interfaces on your router
message that you can configure to display each time someone attempts to log in to the router
network management software used to manage Cisco routers
provides a command-line interface (CLI), which allows network operators to check the status of the router and network administrators to manage and configure the router
editing command that moves the cursor to the beginning of the current line
basic configuration mode in Cisco IOS
specifies that users must log in when they access the console line
the software that interprets the Cisco IOS commands

Accepted Answer

The Answer of Interface description and login command and CiscoWorks is...

Question 14

____ is a type of erasable, programmable, read-only memory (EPROM).

Accepted Answer

A)  ROM 
B)  NVRAM 
C)  DRAM 
D)  Flash memory 
A)  ROM 
B)  NVRAM 
C)  DRAM 
D)  Flash memory

Question 15

Describe the router's ROM.

Accepted Answer

Read-only memory (ROM) loads the bootstr

Question 16

How can you set both the enable password and the enable secret password?

Accepted Answer

You can set both the enable password and

Question 17

When the prompt displayed is the greater than symbol, the router is in ____ EXEC mode.

Accepted Answer

A)  privileged 
B)  admin 
C)  superuser 
D)  user 
A)  privileged 
B)  admin 
C)  superuser 
D)  user

Question 18

You can configure a description for each of the interfaces physically attached to your router by using the ____ command.

Accepted Answer

A)  banner 
B)  description 
C)  motd 
D)  interface 
A)  banner 
B)  description 
C)  motd 
D)  interface

Question 19

You can access the system configuration dialog by typing the ____ command at the privileged EXEC prompt.

Accepted Answer

A)  init 
B)  config 
C)  dialog 
D)  setup 
A)  init 
B)  config 
C)  dialog 
D)  setup

Question 20

What are some of the benefits of routing?

Accepted Answer

Network administrators use routers in la

To enter privileged EXEC, you can type the ____ command at the user mode prompt.

You can turn off the enhanced editing features by typing ____________________ at either the user EXEC or the privileged EXEC prompts.

What are some of the tasks that can be performed at the privileged EXEC mode?

If you want to remove the enable secret password, you can type ____ at the global configuration mode prompt.

What are some of the types of interfaces in a Cisco router?

The startup configuration file for the router is stored in ____ by default.

The editing command ____ moves the cursor to the end of the current line.

With ____ configuration mode, you can configure the virtual terminals, console, and AUX lines that let you access the router.

Network administrators typically access the router directly through the console port (also known as the ____) located on the back of the router.

____ contains the working copy of the current Cisco IOS and is the component that initializes the IOS for normal router operations.

Use the ____ command in enable mode to configure the time.

Describe a router's flash memory.

____ is a type of erasable, programmable, read-only memory (EPROM).

Describe the router's ROM.

How can you set both the enable password and the enable secret password?

When the prompt displayed is the greater than symbol, the router is in ____ EXEC mode.

You can configure a description for each of the interfaces physically attached to your router by using the ____ command.

You can access the system configuration dialog by typing the ____ command at the privileged EXEC prompt.

What are some of the benefits of routing?

Introducing Networks

Network Devices

Tcpip

Ip Addressing

Router Startup and Configuration

Routing Protocols

Advanced Routing Protocols

Network Services

Access Lists

Ppp and Frame Relay

Basic Switching and Switch Configuration

Advanced Switching Concepts

Network Security

Filters

Exam 5: Router and Ios Basics

To enter privileged EXEC, you can type the ____ command at the user mode prompt.

You can turn off the enhanced editing features by typing ____________________ at either the user EXEC or the privileged EXEC prompts.

What are some of the tasks that can be performed at the privileged EXEC mode?

If you want to remove the enable secret password, you can type ____ at the global configuration mode prompt.

What are some of the types of interfaces in a Cisco router?

The startup configuration file for the router is stored in ____ by default.

The editing command ____ moves the cursor to the end of the current line.

With ____ configuration mode, you can configure the virtual terminals, console, and AUX lines that let you access the router.

Network administrators typically access the router directly through the console port (also known as the ____) located on the back of the router.

____ contains the working copy of the current Cisco IOS and is the component that initializes the IOS for normal router operations.

Use the ____ command in enable mode to configure the time.

Describe a router's flash memory.

____ is a type of erasable, programmable, read-only memory (EPROM).

Describe the router's ROM.

How can you set both the enable password and the enable secret password?

When the prompt displayed is the greater than symbol, the router is in ____ EXEC mode.

You can configure a description for each of the interfaces physically attached to your router by using the ____ command.

You can access the system configuration dialog by typing the ____ command at the privileged EXEC prompt.

What are some of the benefits of routing?

Introducing Networks

Network Devices

Tcpip

Ip Addressing

Router Startup and Configuration

Routing Protocols

Advanced Routing Protocols

Network Services

Access Lists

Ppp and Frame Relay

Basic Switching and Switch Configuration

Advanced Switching Concepts

Network Security

Filters