Question 1

____ is a proprietary protocol suite developed by Novell.

Accepted Answer

A)  NetBIOS 
B)  NetBEUI 
C)  IPX/SPX 
D)  TCP/IP 
A)  NetBIOS 
B)  NetBEUI 
C)  IPX/SPX 
D)  TCP/IP C

Question 2

Briefly describe IGRP.

Accepted Answer

IGRP is a proprietary distance-vector routing protocol created by Cisco to solve some of the problems associated with RIP. A larger hop-count metric allows IGRP to be used on larger networks. In fact, IGRP supports a hop count of 255, although 100 is the default if hop count is configured to be used as a metric. If, for example, IGRP is configured to use hops as a metric and 255 hops is the value configured, on the 256th hop IGRP will return an ICMP destination network unreachable message. In some situations you may actually want to reduce IGRP's hop count to speed convergence and route processing. The metric maximum-hops command allows you to set the maximum hop count for IGRP. You should set the hop count to the maximum number of routers within your network if you are going to use hops with IGRP.

Question 3

Match between columns
                        Premises: the most common nonroutable protocol
the most commonly used distance-vector protocol
an example of an EGP
the number of routers a packet must pass through to reach a particular network
value used to define the suitability of a particular route
developed to support networks consisting of multiple networks or subnetworks
a common technique used to stop routing loops
packets used to send out LSAs
value used to determine the reliability of the information regarding a particular route

Accepted Answer

The Answer of RIP and Hop count and Hold-down timer is...

Question 4

NetBEUI cannot scale into large internetworks because it cannot hold Network layer information in its network header.

Accepted Answer

A) True 
 B)False

Question 5

A(n) _________________________ is a group of routers under the control of a single administration.

Accepted Answer

AS,autonom

Question 6

____ is a distance-vector routing protocol that broadcasts entire routing tables to neighbors every 30 seconds, out of every interface.

Accepted Answer

A)  RIP 
B)  OSPF 
C)  BGP 
D)  EIGRP 
A)  RIP 
B)  OSPF 
C)  BGP 
D)  EIGRP

Question 7

The ____ command allows you to set the maximum hop count for IGRP.

Accepted Answer

A)  metric maximum-hops 
B)  igrp maximum-hops 
C)  metric hops 
D)  maximum-hops 
A)  metric maximum-hops 
B)  igrp maximum-hops 
C)  metric hops 
D)  maximum-hops

Question 8

How can you limit count-to-infinity problems by defining a maximum?

Accepted Answer

Defining a maximum is one of the easiest

Question 9

____________________ are protocols used by routers to make path determination choices and to share those choices with other routers.

Accepted Answer

The answer of ____________________ are protocols used by routers to...

Question 10

The ____ is the time at which a route will be totally removed from the routing table if no updates are received.

Accepted Answer

A)  rip interval 
B)  administrative distance 
C)  hop count 
D)  flush interval 
A)  rip interval 
B)  administrative distance 
C)  hop count 
D)  flush interval

Question 11

What are some of the attributes of RIP?

Accepted Answer

RIP has the following attributes:
• It i

Question 12

Routers with only one route out are known as ____.

Accepted Answer

A)  static routers 
B)  hub routers 
C)  stub routers 
D)  start routers 
A)  static routers 
B)  hub routers 
C)  stub routers 
D)  start routers

Question 13

IPX/SPX can be routed across the Internet.

Accepted Answer

A) True 
 B)False

Question 14

____ are very powerful, as they allow administrators complete control over path selection.

Accepted Answer

A)  RIP routes 
B)  Dynamic routes 
C)  Static routes 
D)  Stub routes 
A)  RIP routes 
B)  Dynamic routes 
C)  Static routes 
D)  Stub routes

Question 15

The ____ command allows you to configure an administrative distance.

Accepted Answer

A)  ip distance 
B)  ip route 
C)  adm distance 
D)  adm route 
A)  ip distance 
B)  ip route 
C)  adm distance 
D)  adm route

Question 16

Default routes are sometimes called ____ routes.

Accepted Answer

A)  fallback 
B)  break 
C)  network 
D)  quad zero 
A)  fallback 
B)  break 
C)  network 
D)  quad zero

Question 17

What are some of the drawbacks of using link-state routing protocols?

Accepted Answer

Using link-state routing protocols does

Question 18

____ routing protocols broadcast their entire routing table to each neighbor router at predetermined intervals.

Accepted Answer

A)  Link-state 
B)  Distance-vector 
C)  Distance-state 
D)  Link-vector 
A)  Link-state 
B)  Distance-vector 
C)  Distance-state 
D)  Link-vector

Question 19

Briefly describe NetBEUI.

Accepted Answer

Several nonroutable protocols exist in t

Question 20

Briefly describe Enhanced Interior Gateway Routing Protocol (EIGRP).

Accepted Answer

EIGRP is a hybrid routing protocol devel

____ is a proprietary protocol suite developed by Novell.

Briefly describe IGRP.

NetBEUI cannot scale into large internetworks because it cannot hold Network layer information in its network header.

A(n) _________________________ is a group of routers under the control of a single administration.

____ is a distance-vector routing protocol that broadcasts entire routing tables to neighbors every 30 seconds, out of every interface.

The ____ command allows you to set the maximum hop count for IGRP.

How can you limit count-to-infinity problems by defining a maximum?

____________________ are protocols used by routers to make path determination choices and to share those choices with other routers.

The ____ is the time at which a route will be totally removed from the routing table if no updates are received.

What are some of the attributes of RIP?

Routers with only one route out are known as ____.

IPX/SPX can be routed across the Internet.

____ are very powerful, as they allow administrators complete control over path selection.

The ____ command allows you to configure an administrative distance.

Default routes are sometimes called ____ routes.

What are some of the drawbacks of using link-state routing protocols?

____ routing protocols broadcast their entire routing table to each neighbor router at predetermined intervals.

Briefly describe NetBEUI.

Briefly describe Enhanced Interior Gateway Routing Protocol (EIGRP).

Introducing Networks

Network Devices

Tcpip

Ip Addressing

Router and Ios Basics

Router Startup and Configuration

Advanced Routing Protocols

Network Services

Access Lists

Ppp and Frame Relay

Basic Switching and Switch Configuration

Advanced Switching Concepts

Network Security

Filters

Exam 7: Routing Protocols

____ is a proprietary protocol suite developed by Novell.

Briefly describe IGRP.

NetBEUI cannot scale into large internetworks because it cannot hold Network layer information in its network header.

A(n) _________________________ is a group of routers under the control of a single administration.

____ is a distance-vector routing protocol that broadcasts entire routing tables to neighbors every 30 seconds, out of every interface.

The ____ command allows you to set the maximum hop count for IGRP.

How can you limit count-to-infinity problems by defining a maximum?

____________________ are protocols used by routers to make path determination choices and to share those choices with other routers.

The ____ is the time at which a route will be totally removed from the routing table if no updates are received.

What are some of the attributes of RIP?

Routers with only one route out are known as ____.

IPX/SPX can be routed across the Internet.

____ are very powerful, as they allow administrators complete control over path selection.

The ____ command allows you to configure an administrative distance.

Default routes are sometimes called ____ routes.

What are some of the drawbacks of using link-state routing protocols?

____ routing protocols broadcast their entire routing table to each neighbor router at predetermined intervals.

Briefly describe NetBEUI.

Briefly describe Enhanced Interior Gateway Routing Protocol (EIGRP).

Introducing Networks

Network Devices

Tcpip

Ip Addressing

Router and Ios Basics

Router Startup and Configuration

Advanced Routing Protocols

Network Services

Access Lists

Ppp and Frame Relay

Basic Switching and Switch Configuration

Advanced Switching Concepts

Network Security

Filters