Exam 2: Risk Based Inspection

Following are the critical variables for deterioration mechanism except

When equipment has low deterioration rates as an inspector what you decide in lieu of internal inspection.

Consequence side of the risk equation is normally managed by

The primary work products of the RBI assessment and management approach and implementation of RBI provides

Deterioration for specific process equipment is not available, this can be sourced from

The following are the risks identified by RBI assessment that may be managed by actions other than inspection. Except one

The reduction in the ability of a component to provide its intended purpose of containment of Fluids

Potential source of errors in RBI analysis regarding data quality are the following except

The event may be

Probability of failure analysis is made from

Following are some of the recognized risks which cannot be managed by inspection alone except one

For qualitative RBI analysis it is important to establish a set of rules to assure consistency in

Following are not the residual risk factors for loss of containment.

The models are evaluated _____________ to provide both qualitative and quantitative insights about the level of risk and to identify the design, site, or operational characteristics that are the most important to risk

If the probability and consequence combination (risk) is high enough to be unacceptable, then

Failure mode can primarily affects the

Who should be consulted to define the equipment deterioration mechanisms, susceptibility and potential failure modes?

The data validation step stresses the need for a knowledgeable individual.

Small hole, crack or rupture are examples of

In the event of a leak the potential failure of an isolation valve could