Question 1

A company with multiple remote offices has decided to use synchronous replication. What systems support this capability?

Accepted Answer

A)  Dell EMC Unity XT and Dell EMC UnityVSA 
B)  Dell EMC UnityVSA only 
C)  Dell EMC UnityVSA and VNXe 
D)  Dell EMC Unity XT only 
A)  Dell EMC Unity XT and Dell EMC UnityVSA 
B)  Dell EMC UnityVSA only 
C)  Dell EMC UnityVSA and VNXe 
D)  Dell EMC Unity XT only

Question 2

When the LUN Snapshot Restore operation is performed, what does the Unity system automatically do before beginning the restoration process?

Accepted Answer

A)  Detaches the hosts from the snapshot 
B)  Creates a copy of the snapshot 
C)  Detaches the host from the LUN 
D)  Creates a snapshot of the LUN 
A)  Detaches the hosts from the snapshot 
B)  Creates a copy of the snapshot 
C)  Detaches the host from the LUN 
D)  Creates a snapshot of the LUN

Question 3

Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?

Accepted Answer

A)  Modified Hot Push 
B)  Cold Push 
C)  Hot Pull 
D)  Cold Pull 
A)  Modified Hot Push 
B)  Cold Push 
C)  Hot Pull 
D)  Cold Pull

Question 4

What is the correct method to initiate a Dell EMC Unity XT power down sequence?

Accepted Answer

A)  Use the uemcli halt command Use the uemcli halt command 
B)  Switch both Standby Power Supplies to OFF 
C)  Execute Shut Down Storage System in Unisphere Service Tasks 
D)  Click the Shut Down button in Unisphere system view 
A)  Use the uemcli halt command Use the uemcli halt command 
B)  Switch both Standby Power Supplies to OFF 
C)  Execute Shut Down Storage System in Unisphere Service Tasks 
D)  Click the Shut Down button in Unisphere system view

Question 5

When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?

Accepted Answer

A)  A total of 16 gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination. 
B)  All gatekeepers must be connected to each VMAX splitter/RecoverPoint cluster combination with fixed paths. 
C)  A total of eight gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination. 
D)  When the VMAX splitter/RecoverPoint cluster is connected through Fibre Channel only two gatekeepers must be used. 
A)  A total of 16 gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination. 
B)  All gatekeepers must be connected to each VMAX splitter/RecoverPoint cluster combination with fixed paths. 
C)  A total of eight gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination. 
D)  When the VMAX splitter/RecoverPoint cluster is connected through Fibre Channel only two gatekeepers must be used.

Question 6

Which Dell EMC UnityXT system user interface allows system administrators to create scripts for automating routine tasks?

Accepted Answer

A)  Unisphere Central 
B)  UEMCLI 
C)  IPMI 
D)  Unisphere GUI 
A)  Unisphere Central 
B)  UEMCLI 
C)  IPMI 
D)  Unisphere GUI

Question 7

On a Dell EMC Unity XT file system asynchronous replication session, how many system Snapshots, in total, are required to support replication?

Accepted Answer

A)  1 
B)  2 
C)  4 
D)  8 
A)  1 
B)  2 
C)  4 
D)  8

Question 8

Which operation can be performed from the FAST VP settings section in the Unisphere Settings window?

Accepted Answer

A)  Enable scheduled data relocation for a specific pool 
B)  Exclude pool from the data relocation schedule 
C)  Enable scheduled data relocation at the system level 
D)  View the data relocation progress between tiers 
A)  Enable scheduled data relocation for a specific pool 
B)  Exclude pool from the data relocation schedule 
C)  Enable scheduled data relocation at the system level 
D)  View the data relocation progress between tiers

Question 9

Which Dell EMC Unity XT model(s) supports the 12 Gb/s SAS I/O module?

Accepted Answer

A)  380/380F 
B)  880/880F only 
C)  480/480F, 680/680F, and 880/880F 
D)  680/680F and 880/880F only 
A)  380/380F 
B)  880/880F only 
C)  480/480F, 680/680F, and 880/880F 
D)  680/680F and 880/880F only

Question 10

A Windows test server ran a stress test program that generated a large amount of throughput. This resulted in performance slowdowns on production hosts sharing the same VMFS datastore. What Dell EMC Unity XT feature can the storage administrator use to prevent a re-occurrence of this problem?

Accepted Answer

A)  Data Reduction 
B)  FAST Cache 
C)  File System Quotas 
D)  Host I/O Limits 
A)  Data Reduction 
B)  FAST Cache 
C)  File System Quotas 
D)  Host I/O Limits

Question 11

What benefit does the Dell EMC Unity XT UEMCLI tool provide compared to the Unisphere GUI?

Accepted Answer

A)  Enables users to automate routine tasks using commands 
B)  Discovering a new Dell EMC Unity array and setting up its management IP address 
C)  Configuring and monitoring a Dell EMC Unity XT storage system using puTTY 
D)  Enables users to run REST API calls for complex Unity deployments 
A)  Enables users to automate routine tasks using commands 
B)  Discovering a new Dell EMC Unity array and setting up its management IP address 
C)  Configuring and monitoring a Dell EMC Unity XT storage system using puTTY 
D)  Enables users to run REST API calls for complex Unity deployments

Question 12

On a physical Dell EMC Unity XT system, what is the maximum size to which a UFS64 file system can be extended?

Accepted Answer

A)  32 TB 
B)  64 TB 
C)  128 TB 
D)  256 TB 
A)  32 TB 
B)  64 TB 
C)  128 TB 
D)  256 TB

Question 13

Which command can be issued from the vSphere client to configure an IP management address?

Accepted Answer

A)  svc_initialize_system 
B)  svc_initialize_config 
C)  svc_initial_system 
D)  svc_initial_config 
A)  svc_initialize_system 
B)  svc_initialize_config 
C)  svc_initial_system 
D)  svc_initial_config

Question 14

Which operation can be performed on the General tab of the LUN Properties page?

Accepted Answer

A)  Extend the LUN 
B)  Grant Host access 
C)  Replicate the LUN 
D)  Set Host I/O limits 
A)  Extend the LUN 
B)  Grant Host access 
C)  Replicate the LUN 
D)  Set Host I/O limits

Question 15

A storage administrator attempts to restart the Management Server to resolve Unisphere issues, but is unable to do so. What is a possible reason for this issue?

Accepted Answer

A)  SP is in Reset and Hold mode 
B)  SP is in Maintenance mode 
C)  Both SPs are in Service mode 
D)  Only one SP is in Service mode 
A)  SP is in Reset and Hold mode 
B)  SP is in Maintenance mode 
C)  Both SPs are in Service mode 
D)  Only one SP is in Service mode

Question 16

What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?

Accepted Answer

A)  2 
B)  4 
C)  5 
D)  6 
A)  2 
B)  4 
C)  5 
D)  6

Question 17

What is the minimum requirement for a server to boot from a Dell EMC Unity XT storage system via iSCSI?

Accepted Answer

A)  Hardware iSCSI HBA 
B)  TOE NIC 
C)  Software iSCSI 
D)  iSCSI Initiator 
A)  Hardware iSCSI HBA 
B)  TOE NIC 
C)  Software iSCSI 
D)  iSCSI Initiator

Question 18

How does Dell EMC Unity XT differ from Dell EMC UnityVSA?

Accepted Answer

A)  Unity XT supports FAST VP only UnityVSA supports FAST VP and FAST Cache 
B)  Unity XT supports host I/O limits and monitoring and reporting UnityVSA supports monitoring and reporting only 
C)  UnityXT supports FAST VP and FAST Cache. UnityVSA supports FAST VP only 
D)  UnityXT supports monitoring and reporting only UnityVSA supports host I/O limits and monitoring and reporting 
A)  Unity XT supports FAST VP only UnityVSA supports FAST VP and FAST Cache 
B)  Unity XT supports host I/O limits and monitoring and reporting UnityVSA supports monitoring and reporting only 
C)  UnityXT supports FAST VP and FAST Cache. UnityVSA supports FAST VP only 
D)  UnityXT supports monitoring and reporting only UnityVSA supports host I/O limits and monitoring and reporting

Question 19

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from a Dell EMC Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

Accepted Answer

A)  Create an Asynchronous Replication session for the LUN Configure access to the replica LUN for the secondary host Attach the secondary host 
B)  Create a Snapshot of the LUN Configure LUN access for the secondary host Attach the Snapshot to the secondary host 
C)  Configure secondary host connectivity to Dell EMC Unity XT 
D)  Create a Synchronous Replication session for the LUN 
A)  Create an Asynchronous Replication session for the LUN Configure access to the replica LUN for the secondary host Attach the secondary host 
B)  Create a Snapshot of the LUN Configure LUN access for the secondary host Attach the Snapshot to the secondary host 
C)  Configure secondary host connectivity to Dell EMC Unity XT 
D)  Create a Synchronous Replication session for the LUN

Question 20

In Unisphere, a storage administrator has inadvertently disabled Data Reduction on an existing LUN. What would result from this action?

Accepted Answer

A)  A background LUN migration occurs, moving the data to a new LUN where it is inflated. New data is neither deduplicated nor compressed. 
B)  Existing data is left in its current state. 
C)  Existing data is dynamically inflated to its full size, undoing the impact of deduplication and compression. 
D)  Data Reduction, once enabled, cannot be disabled. New data is deduplicated or compressed. 
A)  A background LUN migration occurs, moving the data to a new LUN where it is inflated. New data is neither deduplicated nor compressed. 
B)  Existing data is left in its current state. 
C)  Existing data is dynamically inflated to its full size, undoing the impact of deduplication and compression. 
D)  Data Reduction, once enabled, cannot be disabled. New data is deduplicated or compressed.

A company with multiple remote offices has decided to use synchronous replication. What systems support this capability?

When the LUN Snapshot Restore operation is performed, what does the Unity system automatically do before beginning the restoration process?

Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?

What is the correct method to initiate a Dell EMC Unity XT power down sequence?

When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?

Which Dell EMC UnityXT system user interface allows system administrators to create scripts for automating routine tasks?

On a Dell EMC Unity XT file system asynchronous replication session, how many system Snapshots, in total, are required to support replication?

Which operation can be performed from the FAST VP settings section in the Unisphere Settings window?

Which Dell EMC Unity XT model(s) supports the 12 Gb/s SAS I/O module?

A Windows test server ran a stress test program that generated a large amount of throughput. This resulted in performance slowdowns on production hosts sharing the same VMFS datastore. What Dell EMC Unity XT feature can the storage administrator use to prevent a re-occurrence of this problem?

What benefit does the Dell EMC Unity XT UEMCLI tool provide compared to the Unisphere GUI?

On a physical Dell EMC Unity XT system, what is the maximum size to which a UFS64 file system can be extended?

Which command can be issued from the vSphere client to configure an IP management address?

Which operation can be performed on the General tab of the LUN Properties page?

A storage administrator attempts to restart the Management Server to resolve Unisphere issues, but is unable to do so. What is a possible reason for this issue?

What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?

What is the minimum requirement for a server to boot from a Dell EMC Unity XT storage system via iSCSI?

How does Dell EMC Unity XT differ from Dell EMC UnityVSA?

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from a Dell EMC Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

In Unisphere, a storage administrator has inadvertently disabled Data Reduction on an existing LUN. What would result from this action?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 4: Unity Solutions Specialist Exam for Implementation Engineers

A company with multiple remote offices has decided to use synchronous replication. What systems support this capability?

When the LUN Snapshot Restore operation is performed, what does the Unity system automatically do before beginning the restoration process?

Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?

What is the correct method to initiate a Dell EMC Unity XT power down sequence?

When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?

Which Dell EMC UnityXT system user interface allows system administrators to create scripts for automating routine tasks?

On a Dell EMC Unity XT file system asynchronous replication session, how many system Snapshots, in total, are required to support replication?

Which operation can be performed from the FAST VP settings section in the Unisphere Settings window?

Which Dell EMC Unity XT model(s) supports the 12 Gb/s SAS I/O module?

A Windows test server ran a stress test program that generated a large amount of throughput. This resulted in performance slowdowns on production hosts sharing the same VMFS datastore. What Dell EMC Unity XT feature can the storage administrator use to prevent a re-occurrence of this problem?

What benefit does the Dell EMC Unity XT UEMCLI tool provide compared to the Unisphere GUI?

On a physical Dell EMC Unity XT system, what is the maximum size to which a UFS64 file system can be extended?

Which command can be issued from the vSphere client to configure an IP management address?

Which operation can be performed on the General tab of the LUN Properties page?

A storage administrator attempts to restart the Management Server to resolve Unisphere issues, but is unable to do so. What is a possible reason for this issue?

What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?

What is the minimum requirement for a server to boot from a Dell EMC Unity XT storage system via iSCSI?

How does Dell EMC Unity XT differ from Dell EMC UnityVSA?

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from a Dell EMC Unity to a primary host. Which solution will meet the requirement and provide space efficiency?

In Unisphere, a storage administrator has inadvertently disabled Data Reduction on an existing LUN. What would result from this action?

VPLEX Specialist for Implementation Engineers

XtremIO Solutions Specialist Exam for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters