Question 1

Which are 802.1x authentication modes? (Choose two.)

Accepted Answer

A)  EAP relay mode 
B)  Proxy mode 
C)  EAP termination mode 
D)  Remote mode 
A)  EAP relay mode 
B)  Proxy mode 
C)  EAP termination mode 
D)  Remote mode

Question 2

In the network diagram, which switch will be selected as the root switch?

Accepted Answer

A)  SWA 
B)  SWB 
C)  SWC 
D)  None of the above 
A)  SWA 
B)  SWB 
C)  SWC 
D)  None of the above

Question 3

A BGP finite state machine has the following states: Active OpenConfirm Idle Establish OpenSent What is the state transition sequence in which the BGP peer relationship is established?

Accepted Answer

A)  Idle-OpenSent-OpenConfirmActive-Establish 
B)  Idle-Active-OpenSent-OpenConfirm-Establish 
C)  Active-Idle-OpenSent-OpenConfirm-Establish 
D)  Idle-Active-OpenConfirm-OpenSent-Establish 
A)  Idle-OpenSent-OpenConfirmActive-Establish 
B)  Idle-Active-OpenSent-OpenConfirm-Establish 
C)  Active-Idle-OpenSent-OpenConfirm-Establish 
D)  Idle-Active-OpenConfirm-OpenSent-Establish

Question 4

One route-policy may have several nodes and each node has a node ID. Each node may have "multiple" if-match and apply clauses. Which of the following statements are true? (Choose two.)

Accepted Answer

A)  Different nodes are in an OR relationship. 
B)  Different nodes are in an AND relationship. 
C)  If-match clauses under a node are in an AND relationship. 
D)  If-match clauses under a node are in an OR relationship. 
A)  Different nodes are in an OR relationship. 
B)  Different nodes are in an AND relationship. 
C)  If-match clauses under a node are in an AND relationship. 
D)  If-match clauses under a node are in an OR relationship.

Question 5

Which of the following is the purpose of access security optimization?

Accepted Answer

A)  To ensure that sensitive management information will not be intercepted. 
B)  To prevent or reduce external network attacks and harm. 
C)  To ensure secure access to key services. 
D)  To achieve secure user access control. 
A)  To ensure that sensitive management information will not be intercepted. 
B)  To prevent or reduce external network attacks and harm. 
C)  To ensure secure access to key services. 
D)  To achieve secure user access control.

Question 6

The multi-channel protocol is used to establish at least two channels (sessions) for communications or services.

Accepted Answer

A) True 
 B)False

Question 7

Which statements regarding the PVID on the access interface are true? (Choose three.)

Accepted Answer

A)  If a packet without VLAN tag is received, the interface adds a VLAN tag to the packets and sets the VID as the default VLAN ID. 
B)  If a packet with VLAN tag is received, the interface compares the VLAN ID in the tag with the default VLAN ID. If they are the same, the interface forwards the packets; otherwise, the interface discards the packets. 
C)  When the interface sends a packet with a VLAN tag that contains the default VLAN ID, the system removes the VLAN tag of the packet, and then forwards the packet. 
D)  PVID on access interface is set to 1 by default and can't be changed. 
A)  If a packet without VLAN tag is received, the interface adds a VLAN tag to the packets and sets the VID as the default VLAN ID. 
B)  If a packet with VLAN tag is received, the interface compares the VLAN ID in the tag with the default VLAN ID. If they are the same, the interface forwards the packets; otherwise, the interface discards the packets. 
C)  When the interface sends a packet with a VLAN tag that contains the default VLAN ID, the system removes the VLAN tag of the packet, and then forwards the packet. 
D)  PVID on access interface is set to 1 by default and can't be changed.

Question 8

OSPF directly runs over the IP protocol. Its IP protocol number is 89.

Accepted Answer

A) True 
 B)False

Question 9

Network address translation (NAT) translates only IP address information.

Accepted Answer

A) True 
 B)False

Question 10

Which LSA is used by OSPF to implement GR?

Accepted Answer

A)  Type-3 LSA 
B)  Type-5 LSA 
C)  Type-9 LSA 
D)  Type-10 LSA 
A)  Type-3 LSA 
B)  Type-5 LSA 
C)  Type-9 LSA 
D)  Type-10 LSA

Question 11

Which BGP attribute is not a well-known mandatory attribute?

Accepted Answer

A)  Origin 
B)  Nexthop 
C)  AS-Path 
D)  MED 
A)  Origin 
B)  Nexthop 
C)  AS-Path 
D)  MED

Question 12

Exhibit:   Based on the DSCP field (first 6 bits of the ToS field), packets can be classified into how many types?

Accepted Answer

A)  4 
B)  8 
C)  16 
D)  64 
A)  4 
B)  8 
C)  16 
D)  64

Question 13

The route selection tool route-policy can filter and set BGP attributes based on pre-defined conditions. Therefore, this tool is commonly used to define policies for BGP peers and often used in route generation.

Accepted Answer

A) True 
 B)False

Question 14

After an interface on a firewall is added to a zone, the interface belongs to the zone.

Accepted Answer

A) True 
 B)False

Question 15

Which of the following statements about the jitter and delay are true? (Choose three.)

Accepted Answer

A)  The end-to-end delay is the sum of transmission delays, processing delays, and queuing delays along the packet forwarding path. 
B)  The variation in packet delay is called jitter. 
C)  The jitter depends on the delay. The lower the delay, the less the jitter. 
D)  The jitter is independent of the delay. 
A)  The end-to-end delay is the sum of transmission delays, processing delays, and queuing delays along the packet forwarding path. 
B)  The variation in packet delay is called jitter. 
C)  The jitter depends on the delay. The lower the delay, the less the jitter. 
D)  The jitter is independent of the delay.

Question 16

Which type of BGP route will be added to the BGP routing table?

Accepted Answer

A)  All BGP routes learned from peers 
B)  Only the routes learned from IBGP peers 
C)  Only the routes learned from EBGP peers 
D)  Only optimal routes 
A)  All BGP routes learned from peers 
B)  Only the routes learned from IBGP peers 
C)  Only the routes learned from EBGP peers 
D)  Only optimal routes

Question 17

A DHCP server supports various types of address allocation policies to meet different requirements. Which of the following is not a correct address allocation policy?

Accepted Answer

A)  Automatic allocation 
B)  Dynamic allocation 
C)  Duplicated allocation 
D)  Manual allocation 
A)  Automatic allocation 
B)  Dynamic allocation 
C)  Duplicated allocation 
D)  Manual allocation

Question 18

When a TCP connection works properly, what is the status of the BGP peer relationship if the peer AS number configured for a BGP router is inconsistent with the AS number of its BGP peer?

Accepted Answer

A)  Idle 
B)  Active 
C)  OpenSent 
D)  Establish 
A)  Idle 
B)  Active 
C)  OpenSent 
D)  Establish

Question 19

Which of the following statements regarding IS-IS characteristics are true? (Choose three.)

Accepted Answer

A)  IS-IS supports various area features. 
B)  IS-IS packet format is simple. 
C)  IS-IS is suitable for large-capacity route transmission. 
D)  IS-IS has good scalability. 
A)  IS-IS supports various area features. 
B)  IS-IS packet format is simple. 
C)  IS-IS is suitable for large-capacity route transmission. 
D)  IS-IS has good scalability.

Question 20

Which of the following statements about the master router in a VRRP backup group are true? (Choose three.)

Accepted Answer

A)  It regularly sends VRRP packets. 
B)  It uses a virtual MAC address to respond to ARP requests sent from a virtual IP address. 
C)  It forwards an IP packet whose destination MAC address is a physical MAC address. 
D)  It changes to the Backup state if the priority carried in the received packet is greater than its own priority. 
A)  It regularly sends VRRP packets. 
B)  It uses a virtual MAC address to respond to ARP requests sent from a virtual IP address. 
C)  It forwards an IP packet whose destination MAC address is a physical MAC address. 
D)  It changes to the Backup state if the priority carried in the received packet is greater than its own priority.

Which are 802.1x authentication modes? (Choose two.)

In the network diagram, which switch will be selected as the root switch?

A BGP finite state machine has the following states: Active OpenConfirm Idle Establish OpenSent What is the state transition sequence in which the BGP peer relationship is established?

One route-policy may have several nodes and each node has a node ID. Each node may have "multiple" if-match and apply clauses. Which of the following statements are true? (Choose two.)

Which of the following is the purpose of access security optimization?

The multi-channel protocol is used to establish at least two channels (sessions) for communications or services.

Which statements regarding the PVID on the access interface are true? (Choose three.)

OSPF directly runs over the IP protocol. Its IP protocol number is 89.

Network address translation (NAT) translates only IP address information.

Which LSA is used by OSPF to implement GR?

Which BGP attribute is not a well-known mandatory attribute?

Exhibit: Based on the DSCP field (first 6 bits of the ToS field), packets can be classified into how many types?

The route selection tool route-policy can filter and set BGP attributes based on pre-defined conditions. Therefore, this tool is commonly used to define policies for BGP peers and often used in route generation.

After an interface on a firewall is added to a zone, the interface belongs to the zone.

Which of the following statements about the jitter and delay are true? (Choose three.)

Which type of BGP route will be added to the BGP routing table?

A DHCP server supports various types of address allocation policies to meet different requirements. Which of the following is not a correct address allocation policy?

When a TCP connection works properly, what is the status of the BGP peer relationship if the peer AS number configured for a BGP router is inconsistent with the AS number of its BGP peer?

Which of the following statements regarding IS-IS characteristics are true? (Choose three.)

Which of the following statements about the master router in a VRRP backup group are true? (Choose three.)

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HHCIA Routing&Switching

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 5: HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

Which are 802.1x authentication modes? (Choose two.)

In the network diagram, which switch will be selected as the root switch?

A BGP finite state machine has the following states: Active OpenConfirm Idle Establish OpenSent What is the state transition sequence in which the BGP peer relationship is established?

One route-policy may have several nodes and each node has a node ID. Each node may have "multiple" if-match and apply clauses. Which of the following statements are true? (Choose two.)

Which of the following is the purpose of access security optimization?

The multi-channel protocol is used to establish at least two channels (sessions) for communications or services.

Which statements regarding the PVID on the access interface are true? (Choose three.)

OSPF directly runs over the IP protocol. Its IP protocol number is 89.

Network address translation (NAT) translates only IP address information.

Which LSA is used by OSPF to implement GR?

Which BGP attribute is not a well-known mandatory attribute?

Exhibit: Based on the DSCP field (first 6 bits of the ToS field), packets can be classified into how many types?

The route selection tool route-policy can filter and set BGP attributes based on pre-defined conditions. Therefore, this tool is commonly used to define policies for BGP peers and often used in route generation.

After an interface on a firewall is added to a zone, the interface belongs to the zone.

Which of the following statements about the jitter and delay are true? (Choose three.)

Which type of BGP route will be added to the BGP routing table?

A DHCP server supports various types of address allocation policies to meet different requirements. Which of the following is not a correct address allocation policy?

When a TCP connection works properly, what is the status of the BGP peer relationship if the peer AS number configured for a BGP router is inconsistent with the AS number of its BGP peer?

Which of the following statements regarding IS-IS characteristics are true? (Choose three.)

Which of the following statements about the master router in a VRRP backup group are true? (Choose three.)

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HHCIA Routing&Switching

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters