Question 1

Which of the following routing protocols support import-route? (Choose three.)

Accepted Answer

A)  OSPF 
B)  RIP 
C)  BGP 
D)  Static 
A)  OSPF 
B)  RIP 
C)  BGP 
D)  Static

Question 2

Which of the following statements about the BFD asynchronous mode are true? (Choose two.)

Accepted Answer

A)  The local system regularly sends BFD control packets, and the remote system detects the BFD control packets sent from the local system. 
B)  The local system detects the BFD control packets sent by itself. 
C)  If one system does not receive any BFD packets from its peer within a detection period, it advertises a session Down event. 
D)  Each system confirms its connections with other systems in a particular method. After a BFD session is set up, BFD control packets are no longer sent. 
A)  The local system regularly sends BFD control packets, and the remote system detects the BFD control packets sent from the local system. 
B)  The local system detects the BFD control packets sent by itself. 
C)  If one system does not receive any BFD packets from its peer within a detection period, it advertises a session Down event. 
D)  Each system confirms its connections with other systems in a particular method. After a BFD session is set up, BFD control packets are no longer sent.

Question 3

RTA connected to a LAN by e0/0 whose IP address is 10.1.1.251 and network Mask is 255.255.255.0. Now create a virtual router with ID 1 and virtual IP address 10.1.1.254 on RTA. Which of the following commands are correct?

Accepted Answer

A)  [RTA-Ethernet0/0]vrrpvrid 1 virtual-ip 10.1.1.254 
B)  [RTA]vrrpvrid 1 virtual-ip 10.1.1.254 
C)  [RTA-Ethernet0/0]vrrpvrid 1 virtual-ip 10.1.1.254 mask 255.255.255.0 
D)  [RTA]vrrpvrid 1 virtual-ip 10.1.1.254 mask 255.255.255.0 
A)  [RTA-Ethernet0/0]vrrpvrid 1 virtual-ip 10.1.1.254 
B)  [RTA]vrrpvrid 1 virtual-ip 10.1.1.254 
C)  [RTA-Ethernet0/0]vrrpvrid 1 virtual-ip 10.1.1.254 mask 255.255.255.0 
D)  [RTA]vrrpvrid 1 virtual-ip 10.1.1.254 mask 255.255.255.0

Question 4

What is the maximum number of security zones supported by the Eudemon?

Accepted Answer

A)  256 
B)  128 
C)  32 
D)  16 
A)  256 
B)  128 
C)  32 
D)  16

Question 5

Which of the following procedures are included in IS-IS route calculation? (Choose all that apply.)

Accepted Answer

A)  Neighbor relationship establishment 
B)  Route calculation 
C)  Link information exchange 
D)  Route advertisement 
E)  None of the above 
A)  Neighbor relationship establishment 
B)  Route calculation 
C)  Link information exchange 
D)  Route advertisement 
E)  None of the above

Question 6

How many port states are defined by STP?

Accepted Answer

A)  3 
B)  4 
C)  5 
D)  6 
A)  3 
B)  4 
C)  5 
D)  6

Question 7

The Eudemon can control traffic and connections based on IP addresses.

Accepted Answer

A) True 
 B)False

Question 8

The project scope can be determined from three aspects. Which of the following is not included?

Accepted Answer

A)  Functions and modules to be realized by the project 
B)  Geographic range of the network 
C)  Investment budget of the project 
D)  Responsibility division between the project and other matching systems 
A)  Functions and modules to be realized by the project 
B)  Geographic range of the network 
C)  Investment budget of the project 
D)  Responsibility division between the project and other matching systems

Question 9

What are the functions of route filtering? (Choose three.)

Accepted Answer

A)  Avoids sub-optimal routes generated in route importing. 
B)  Avoids routing loops. 
C)  Affects route selection by changing route attributes. 
D)  Implements accurate route importing and controls route advertisement. 
A)  Avoids sub-optimal routes generated in route importing. 
B)  Avoids routing loops. 
C)  Affects route selection by changing route attributes. 
D)  Implements accurate route importing and controls route advertisement.

Question 10

What is the multicast destination address of VRRP packets?

Accepted Answer

A)  224.0.0.18 
B)  224.0.0.20 
C)  224.0.1.18 
D)  224.0.1.20 
A)  224.0.0.18 
B)  224.0.0.20 
C)  224.0.1.18 
D)  224.0.1.20

Question 11

Which of the following statements about BFD control packets are true? (Choose three.)

Accepted Answer

A)  A BFD control packet is encapsulated in a UDP packet for transmission. Authentication fields in a BFD control packet are optional. 
B)  BFD detection is not available in VRP 5.7. 
C)  Echo packets use UDP destination port number 3784. 
D)  Echo packets use UDP destination port number 3785. 
A)  A BFD control packet is encapsulated in a UDP packet for transmission. Authentication fields in a BFD control packet are optional. 
B)  BFD detection is not available in VRP 5.7. 
C)  Echo packets use UDP destination port number 3784. 
D)  Echo packets use UDP destination port number 3785.

Question 12

Which of the following solutions effectively defend against ARP attacks? (Choose three.)

Accepted Answer

A)  Binding a MAC address and an IP address 
B)  Enabling the ARP attack protection function on a Huawei switching device 
C)  Adding network segments to different VLANs on a switch 
D)  Enabling IP packet filtering 
A)  Binding a MAC address and an IP address 
B)  Enabling the ARP attack protection function on a Huawei switching device 
C)  Adding network segments to different VLANs on a switch 
D)  Enabling IP packet filtering

Question 13

The system can perform ACL rule matching only based on the configuration order of rules.

Accepted Answer

A) True 
 B)False

Question 14

Which of the statements describes the way BGP update routes?

Accepted Answer

A)  Broadcasts all of the routes periodically 
B)  Update all of the routes using multicast address periodically 
C)  Only update the changed routes and the new routes 
D)  Update routes when BGP peer requests 
A)  Broadcasts all of the routes periodically 
B)  Update all of the routes using multicast address periodically 
C)  Only update the changed routes and the new routes 
D)  Update routes when BGP peer requests

Question 15

Which of the BGP attributes is Optional transitive attribute?

Accepted Answer

A)  ORIGIN 
B)  AS_PATH 
C)  NEXT_HOP 
D)  MED 
E)  LOCAL_PREF
F) COMMUNITY 
A)  ORIGIN 
B)  AS_PATH 
C)  NEXT_HOP 
D)  MED 
E)  LOCAL_PREF
F) COMMUNITY

Question 16

Which are the two subfields in the port identifier of the uplink port on a non-root switch in RSTP?

Accepted Answer

A)  1-byte port priority and 1-byte port number 
B)  1-byte port priority and 2-byte port number 
C)  2-byte port priority and 1-byte port number 
D)  2-byte port priority and 2-byte port number 
A)  1-byte port priority and 1-byte port number 
B)  1-byte port priority and 2-byte port number 
C)  2-byte port priority and 1-byte port number 
D)  2-byte port priority and 2-byte port number

Question 17

What is the sequence of applying for an IP address in DHCP? 1. The host sends a DHCP Request message to apply for an IP address. 2. The DHCP server replies with a DHCP Offer message. 3. The host sends a DHCP Discovery message to search for the DHCP server. 4. The DHCP server replies with a DHCP ACK message after receiving the DHCP Request message.

Accepted Answer

A)  1-2-3-4 
B)  1-4-3-2 
C)  3-2-1-4 
D)  3-4-1-2 
A)  1-2-3-4 
B)  1-4-3-2 
C)  3-2-1-4 
D)  3-4-1-2

Question 18

In STP configuration, which statement about BPDUs is true?

Accepted Answer

A)  BPDUs cannot be sent from the designated port. 
B)  BPDUs can be sent only from the designated port. 
C)  BPDUs can be sent from any port. 
D)  None of the above. 
A)  BPDUs cannot be sent from the designated port. 
B)  BPDUs can be sent only from the designated port. 
C)  BPDUs can be sent from any port. 
D)  None of the above.

Question 19

In the DiffServ domain, the core router typically only performs simple traffic classification.

Accepted Answer

A) True 
 B)False

Question 20

Complex traffic classification can be performed based on which of the following packet information? (Choose three.)

Accepted Answer

A)  Packet priority 
B)  Source and destination addresses 
C)  Total Length of the Packet 
D)  Source and destination port numbers 
A)  Packet priority 
B)  Source and destination addresses 
C)  Total Length of the Packet 
D)  Source and destination port numbers

Which of the following routing protocols support import-route? (Choose three.)

Which of the following statements about the BFD asynchronous mode are true? (Choose two.)

RTA connected to a LAN by e0/0 whose IP address is 10.1.1.251 and network Mask is 255.255.255.0. Now create a virtual router with ID 1 and virtual IP address 10.1.1.254 on RTA. Which of the following commands are correct?

What is the maximum number of security zones supported by the Eudemon?

Which of the following procedures are included in IS-IS route calculation? (Choose all that apply.)

How many port states are defined by STP?

The Eudemon can control traffic and connections based on IP addresses.

The project scope can be determined from three aspects. Which of the following is not included?

What are the functions of route filtering? (Choose three.)

What is the multicast destination address of VRRP packets?

Which of the following statements about BFD control packets are true? (Choose three.)

Which of the following solutions effectively defend against ARP attacks? (Choose three.)

The system can perform ACL rule matching only based on the configuration order of rules.

Which of the statements describes the way BGP update routes?

Which of the BGP attributes is Optional transitive attribute?

Which are the two subfields in the port identifier of the uplink port on a non-root switch in RSTP?

In STP configuration, which statement about BPDUs is true?

In the DiffServ domain, the core router typically only performs simple traffic classification.

Complex traffic classification can be performed based on which of the following packet information? (Choose three.)

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HHCIA Routing&Switching

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 5: HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

Which of the following routing protocols support import-route? (Choose three.)

Which of the following statements about the BFD asynchronous mode are true? (Choose two.)

RTA connected to a LAN by e0/0 whose IP address is 10.1.1.251 and network Mask is 255.255.255.0. Now create a virtual router with ID 1 and virtual IP address 10.1.1.254 on RTA. Which of the following commands are correct?

What is the maximum number of security zones supported by the Eudemon?

Which of the following procedures are included in IS-IS route calculation? (Choose all that apply.)

How many port states are defined by STP?

The Eudemon can control traffic and connections based on IP addresses.

The project scope can be determined from three aspects. Which of the following is not included?

What are the functions of route filtering? (Choose three.)

What is the multicast destination address of VRRP packets?

Which of the following statements about BFD control packets are true? (Choose three.)

Which of the following solutions effectively defend against ARP attacks? (Choose three.)

The system can perform ACL rule matching only based on the configuration order of rules.

Which of the statements describes the way BGP update routes?

Which of the BGP attributes is Optional transitive attribute?

Which are the two subfields in the port identifier of the uplink port on a non-root switch in RSTP?

In STP configuration, which statement about BPDUs is true?

In the DiffServ domain, the core router typically only performs simple traffic classification.

Complex traffic classification can be performed based on which of the following packet information? (Choose three.)

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HHCIA Routing&Switching

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters