Question 1

Tool design involves many areas of knowledge such as kinematics, and material handling.

Accepted Answer

A) True 
 B)False  True

Question 2

Water jet cutting is used on composite materials.

Accepted Answer

A) True 
 B)False  True

Question 3

A chamfer is the polishing of external edges and corners.

Accepted Answer

A) True 
 B)False  False

Question 4

Prototype construction or modeling is done after engineering drawings and documents.

Accepted Answer

A) True 
 B)False

Question 5

A reamer is used to machine new holes and enlarge existing holes.

Accepted Answer

A) True 
 B)False

Question 6

Elastomers are able to stretch three times their original length and return to their original length after stretching.

Accepted Answer

A) True 
 B)False

Question 7

Steels are identified by four numbers, except for some chromium steels, which have five numbers.

Accepted Answer

A) True 
 B)False

Question 8

The sand casting pattern is called a ____.

Accepted Answer

A)  cope 
B)  flask 
C)  drag 
D)  runner 
E)  none of the above 
A)  cope 
B)  flask 
C)  drag 
D)  runner 
E)  none of the above

Question 9

Injection molding process involves injecting molten plastic material into a mold that is in the form of the desired part or product.

Accepted Answer

A) True 
 B)False

Question 10

Define alloy.

Accepted Answer

Alloys are

Question 11

The combined numbering system for metals and alloys is called

Accepted Answer

A)  Standardized Numbers for Metals and Alloys (SNM
A)  
B)  Unified Numbering System (UNS) 
C)  Decimal System 
D)  none of the above 
A)  Standardized Numbers for Metals and Alloys (SNM
A)  
B)  Unified Numbering System (UNS) 
C)  Decimal System 
D)  none of the above

Question 12

Founding is another word for casting.

Accepted Answer

A) True 
 B)False

Question 13

Powder metallurgy process is less cost effective than casting, forging and stamping.

Accepted Answer

A) True 
 B)False

Question 14

Define fixtures.

Accepted Answer

Fixtures are often used in the

Question 15

Materials for product manufacturing fall into four general categories: metal, plastic, inorganic materials, and alloys.

Accepted Answer

A) True 
 B)False

Question 16

Steel is a rare material that can be worked in either a heated or a cooled state.

Accepted Answer

A) True 
 B)False

Question 17

____________________ is the ability to be stretched, drawn or hammered thin without breaking.

Accepted Answer

The answer of ____________________ is the ability to be stretched,...

Question 18

Fixtures guide the cutting tool.

Accepted Answer

A) True 
 B)False

Question 19

Define and give a use for countersink.

Accepted Answer

A countersink is a conical fea

Question 20

Explain the differences between a fillet and a round

Accepted Answer

A fillet is a small radius for

Tool design involves many areas of knowledge such as kinematics, and material handling.

Water jet cutting is used on composite materials.

A chamfer is the polishing of external edges and corners.

Prototype construction or modeling is done after engineering drawings and documents.

A reamer is used to machine new holes and enlarge existing holes.

Elastomers are able to stretch three times their original length and return to their original length after stretching.

Steels are identified by four numbers, except for some chromium steels, which have five numbers.

The sand casting pattern is called a ____.

Injection molding process involves injecting molten plastic material into a mold that is in the form of the desired part or product.

Define alloy.

The combined numbering system for metals and alloys is called

Founding is another word for casting.

Powder metallurgy process is less cost effective than casting, forging and stamping.

Define fixtures.

Materials for product manufacturing fall into four general categories: metal, plastic, inorganic materials, and alloys.

Steel is a rare material that can be worked in either a heated or a cooled state.

____________________ is the ability to be stretched, drawn or hammered thin without breaking.

Fixtures guide the cutting tool.

Define and give a use for countersink.

Explain the differences between a fillet and a round

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 7: Manufacturing Materials and Processes

Tool design involves many areas of knowledge such as kinematics, and material handling.

Water jet cutting is used on composite materials.

A chamfer is the polishing of external edges and corners.

Prototype construction or modeling is done after engineering drawings and documents.

A reamer is used to machine new holes and enlarge existing holes.

Elastomers are able to stretch three times their original length and return to their original length after stretching.

Steels are identified by four numbers, except for some chromium steels, which have five numbers.

The sand casting pattern is called a ____.

Injection molding process involves injecting molten plastic material into a mold that is in the form of the desired part or product.

Define alloy.

The combined numbering system for metals and alloys is called

Founding is another word for casting.

Powder metallurgy process is less cost effective than casting, forging and stamping.

Define fixtures.

Materials for product manufacturing fall into four general categories: metal, plastic, inorganic materials, and alloys.

Steel is a rare material that can be worked in either a heated or a cooled state.

____________________ is the ability to be stretched, drawn or hammered thin without breaking.

Fixtures guide the cutting tool.

Define and give a use for countersink.

Explain the differences between a fillet and a round

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters