Question 1

When straightness is connected to the surface of the feature with a leader, ____ is implied.

Accepted Answer

A)  surface straightness 
B)  axis straightness 
C)  unit straightness 
D)  zone straigthness 
E)  none of the above 
A)  surface straightness 
B)  axis straightness 
C)  unit straightness 
D)  zone straigthness 
E)  none of the above A

Question 2

Unit flatness can be specified when it is desirable to control the flatness of surface units.

Accepted Answer

A) True 
 B)False  True

Question 3

A numerical value used to describe the theoretically exact size, profile, orientation, or location of a feature or datum target. It is the basis from which permissible variations are established by tolerances on other dimensions, in notes, or in feature control frames.

Accepted Answer

Basic Dimension

Question 4

A ___________ profile tolerance is where the entire tolerance zone is on one side of the true profile.

Accepted Answer

The answer of A ___________ profile tolerance is where the...

Question 5

An ___________________________ tolerance splits the tolerance zone equally on each side of true profile.

Accepted Answer

equally di

Question 6

List the five types into which geometric tolerancing symbols are divided.

Accepted Answer

datum, geometric characteristi

Question 7

A ________________ is a line element on the contour of a radial surface.

Accepted Answer

The answer of A ________________ is a line element on...

Question 8

If a situation occurs in which the interrelationship between patterns such as location and size is not desired, then the specific note "SEP REQT", which means separate requirement, shall be placed beneath each affected feature control frame.

Accepted Answer

A) True 
 B)False

Question 9

An ___________ geometric tolerance zone is established by two parallel planes or cylindrical zones at any specified basic angle, other than 90°, to a datum plane, a pair of datum planes, or an axis.

Accepted Answer

The answer of An ___________ geometric tolerance zone is established...

Question 10

A cylinder is given the dimension Ø 18.2/17.8. The feature control frame has one horizontal line as the first element, and Ø 0.1 as the second element. What does this mean?

Accepted Answer

A)  The straightness tolerance is applied to the axis of the cylinder. 
B)  The MMC is 18.3. 
C)  The LMC is 17.8. 
D)  both a and c 
E)  all of the above 
A)  The straightness tolerance is applied to the axis of the cylinder. 
B)  The MMC is 18.3. 
C)  The LMC is 17.8. 
D)  both a and c 
E)  all of the above

Question 11

When a datum feature symbol appears in a feature control frame along with a datum reference, it means they are inherently related.

Accepted Answer

A) True 
 B)False

Question 12

The datum target symbol identifies the datum target area size and the datum target identification.

Accepted Answer

A) True 
 B)False

Question 13

_________________________ is a axis to median point control and not an axis to axis control.

Accepted Answer

The answer of _________________________ is a axis to median point...

Question 14

A group of features is referred to as a _____________________________ when they are located relative to common datum features not subject to size tolerance, or to common datum features of size specified on an RFS basis.

Accepted Answer

single com

Question 15

The location tolerance specifies the amount that ____ of the feature is (are) allowed to deviate from true position.

Accepted Answer

A)  axis 
B)  boundaries 
C)  surface 
D)  circularity 
E)  none of the above 
A)  axis 
B)  boundaries 
C)  surface 
D)  circularity 
E)  none of the above

Question 16

Name the symbol used to indicate that the datum target is not fixed at its basic location and is free to translate.

Accepted Answer

movable da

Question 17

A datum is considered a theoretically perfect surface, plane, point, or axis.

Accepted Answer

A) True 
 B)False

Question 18

A datum reference frame consists of ____ perpendicular planes.

Accepted Answer

A)  one 
B)  two mutually 
C)  three mutually 
D)  four mutually 
E)  none of the above 
A)  one 
B)  two mutually 
C)  three mutually 
D)  four mutually 
E)  none of the above

Question 19

The application of LMC is not as prevalent as the application of MMC.

Accepted Answer

A) True 
 B)False

Question 20

This is the actual feature of the part that is used to establish the datum.

Accepted Answer

The answer of This is the actual feature of the...

When straightness is connected to the surface of the feature with a leader, ____ is implied.

Unit flatness can be specified when it is desirable to control the flatness of surface units.

A numerical value used to describe the theoretically exact size, profile, orientation, or location of a feature or datum target. It is the basis from which permissible variations are established by tolerances on other dimensions, in notes, or in feature control frames.

A ___________ profile tolerance is where the entire tolerance zone is on one side of the true profile.

An ___________________________ tolerance splits the tolerance zone equally on each side of true profile.

List the five types into which geometric tolerancing symbols are divided.

A ________________ is a line element on the contour of a radial surface.

If a situation occurs in which the interrelationship between patterns such as location and size is not desired, then the specific note "SEP REQT", which means separate requirement, shall be placed beneath each affected feature control frame.

An ___________ geometric tolerance zone is established by two parallel planes or cylindrical zones at any specified basic angle, other than 90°, to a datum plane, a pair of datum planes, or an axis.

A cylinder is given the dimension Ø 18.2/17.8. The feature control frame has one horizontal line as the first element, and Ø 0.1 as the second element. What does this mean?

When a datum feature symbol appears in a feature control frame along with a datum reference, it means they are inherently related.

The datum target symbol identifies the datum target area size and the datum target identification.

_________________________ is a axis to median point control and not an axis to axis control.

A group of features is referred to as a _____________________________ when they are located relative to common datum features not subject to size tolerance, or to common datum features of size specified on an RFS basis.

The location tolerance specifies the amount that ____ of the feature is (are) allowed to deviate from true position.

Name the symbol used to indicate that the datum target is not fixed at its basic location and is free to translate.

A datum is considered a theoretically perfect surface, plane, point, or axis.

A datum reference frame consists of ____ perpendicular planes.

The application of LMC is not as prevalent as the application of MMC.

This is the actual feature of the part that is used to establish the datum.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 11: Reading Geometric Dimensioning and Tolerancing

When straightness is connected to the surface of the feature with a leader, ____ is implied.

Unit flatness can be specified when it is desirable to control the flatness of surface units.

A numerical value used to describe the theoretically exact size, profile, orientation, or location of a feature or datum target. It is the basis from which permissible variations are established by tolerances on other dimensions, in notes, or in feature control frames.

A ___________ profile tolerance is where the entire tolerance zone is on one side of the true profile.

An ___________________________ tolerance splits the tolerance zone equally on each side of true profile.

List the five types into which geometric tolerancing symbols are divided.

A ________________ is a line element on the contour of a radial surface.

If a situation occurs in which the interrelationship between patterns such as location and size is not desired, then the specific note "SEP REQT", which means separate requirement, shall be placed beneath each affected feature control frame.

An ___________ geometric tolerance zone is established by two parallel planes or cylindrical zones at any specified basic angle, other than 90°, to a datum plane, a pair of datum planes, or an axis.

A cylinder is given the dimension Ø 18.2/17.8. The feature control frame has one horizontal line as the first element, and Ø 0.1 as the second element. What does this mean?

When a datum feature symbol appears in a feature control frame along with a datum reference, it means they are inherently related.

The datum target symbol identifies the datum target area size and the datum target identification.

_________________________ is a axis to median point control and not an axis to axis control.

A group of features is referred to as a _____________________________ when they are located relative to common datum features not subject to size tolerance, or to common datum features of size specified on an RFS basis.

The location tolerance specifies the amount that ____ of the feature is (are) allowed to deviate from true position.

Name the symbol used to indicate that the datum target is not fixed at its basic location and is free to translate.

A datum is considered a theoretically perfect surface, plane, point, or axis.

A datum reference frame consists of ____ perpendicular planes.

The application of LMC is not as prevalent as the application of MMC.

This is the actual feature of the part that is used to establish the datum.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters