Exam 15: Welding Processes and Reading Welding Representations

A series of 3/4" in diameter plug welds is to be made on the other side. The angle of the welds is to be 35°, the depth of each weld is to be 3/16", and the pitch is to be 6. What will this welding symbol look like?

Oxyfuel welding is faster and cleaner than other welding processes.

The standard welding symbol, which is shaped like a right triangle with equal sides adjacent to that angle, represents a ____ weld.

Welding is a process of joining two or more pieces of like metals by heating the material to a temperature high enough to cause softening or melting.

The ____ costs less to operate than other methods.

Lap, tee, outside corner, edge, and butt are types of weld joints.

Weld-all-around symbol is attached to the reference line at the junction of the leader when a welded connection must be performed all around a feature.

____________________ is a trademark of the Union Carbine Corporation.

A welding symbol that appears below the reference line consists of a right triangle with one of the sides touching the reference line. To the left of the triangle is the notation 3/4. To the right of the triangle is the notation 10-16. What does this symbol signify?

The depth of penetration of flare-formed groove welds is assumed to extend to ____.

The weld symbol in which a small circle is drawn with its center at the intersection of the leader line and the reference line means ____.

The (A) ____ is a detailed statement of the legal requirements for a specific classification or type of product.

A V groove weld symbol with a "3/8" to the right of the symbol, both of which are under the reference line means ____.

The side of the joint to which the arrow points is the arrow side.

"Weldment" is another term for welding assemblies.

When a plug weld is given a size, it is the size at the top of the weld, as opposed to the size at the bottom of the weld.

When single groove and symmetrical double groove welds penetrate completely through the parts being joined, the weld size can be omitted.

A square groove weld symbol is assumed to have a root opening if there is a value shown within it.

The size of a fillet weld is shown on the ____ side of the reference line as (to) the weld symbol and to the ____ of the symbol.

The field weld symbol "points" toward the reference line.