A bucket of water with total mass 21.0 kg is attached to a rope,which in turn is wound around a 0.050-m radius cylinder,with crank,at the top of a well.The moment of inertia of the cylinder and crank is 0.21 kg M2.The bucket is raised to the top of the well and released to fall back into the well.What is the kinetic energy of the cylinder and crank at the instant the bucket is moving with a speed of 5.4 m/s?

A) 4.8E+2 J B) 1.2E+3 J C) 3.1E+2 J D) 1.2E+4 J A) 4.8E+2 J B) 1.2E+3 J C) 3.1E+2 J D) 1.2E+4 J

A non-uniform rod of length L and mass M is pivoted about one end.The moment of inertia of this rod about its pivoted end is 1ML2/4.Attached to the rod is a mass 3M at its midpoint and at the end opposite the pivot is another mass 2M.What is the moment of inertia of this configuration about the pivot?

A) 3ML2 B) 2ML2 C) 4ML2 D) 5ML2 E) None of the above answers is correct. A) 3ML2 B) 2ML2 C) 4ML2 D) 5ML2 E) None of the above answers is correct.

Three masses are positioned along the x-axis.Their masses and positions are m1 = m with x1 = 1.0 m,m2 = 2m with x2 = 2.0 m,and m3 = 9.0m with x3 = 3.0 m.What is the x-coordinate of the center of mass of this system,to the nearest tenth?

A) 4.7 m B) 2.7 m C) 2.0 m D) 0.7 m E) Not enough information A) 4.7 m B) 2.7 m C) 2.0 m D) 0.7 m E) Not enough information

A rod system with a uniform linear density of $\lambda$ = 4.40 kg/m has the shape shown in the figure,with rod 1 the vertical rod and rod 2 the horizontal rod.Rod 1 has length LS1U1B11S1U1B0 = 8.00 m,and rod 2 has length LS1U1B12S1U1B0 = 7.50 m.Neglect the diameter of the rods. -What is the center of mass of the system?

A) (1.29 m,3.31 m) B) (2.06 m,3.10 m) C) (3.31 m,1.29 m) D) (3.10 m,2.06 m) A) (1.29 m,3.31 m) B) (2.06 m,3.10 m) C) (3.31 m,1.29 m) D) (3.10 m,2.06 m)

Exam 8: Rotational Equilibrium and Dynamics

A bucket of water with total mass 21.0 kg is attached to a rope,which in turn is wound around a 0.050-m radius cylinder,with crank,at the top of a well.The moment of inertia of the cylinder and crank is 0.21 kg M².The bucket is raised to the top of the well and released to fall back into the well.What is the kinetic energy of the cylinder and crank at the instant the bucket is moving with a speed of 5.4 m/s?

(Multiple Choice)

4.8/5

(28)

Question 21

A bucket in an old well is hoisted upward by a rope which winds up on a cylinder having a radius of 0.050 m.How many rev/s must the cylinder turn if the bucket is raised at a speed of 0.250 m/s?

(Multiple Choice)

4.8/5

(30)

Question 22

A uniform solid sphere rolls down an incline of height 3 m after starting from rest.In order to calculate its speed at the bottom of the incline,one needs to know:

(Multiple Choice)

4.9/5

(34)

Question 23

A baseball pitcher loosens up his pitching arm.He tosses a 0.20-kg ball using only the rotation of his forearm,0.28 m in length,to accelerate the ball.What is the moment of inertia of the ball alone as it moves in a circular arc with a radius of 0.28 m?

(Multiple Choice)

4.8/5

(38)

Question 24

A 40-kg boy is standing on the edge of a stationary 30-kg circular platform that is free to rotate.The boy tries to walk around the platform in a counterclockwise direction.As he does:

(Multiple Choice)

4.8/5

(31)

Question 25

A non-uniform rod of length L and mass M is pivoted about one end.The moment of inertia of this rod about its pivoted end is 1ML²/4.Attached to the rod is a mass 3M at its midpoint and at the end opposite the pivot is another mass 2M.What is the moment of inertia of this configuration about the pivot?

(Multiple Choice)

4.8/5

(40)

Question 26

An object with mass m and moment of inertia I is spinning with an angular momentum L.Its kinetic energy is:

(Multiple Choice)

4.9/5

(28)

Question 27

A 3.00-m rod is pivoted about its left end.A force of 7.80 N is applied perpendicular to the rod at a distance of 1.60 m from the pivot causing a ccw torque,and a force of 2.60 N is applied at the end of the rod 3.00 m from the pivot.The 2.60-N force is at an angle of 30.0^o to the rod and causes a cw torque.What is the net torque about the pivot? (Take ccw as positive. )

(Multiple Choice)

4.8/5

(36)

Question 28

A bus is designed to draw its power from a rotating flywheel that is brought up to its maximum speed (3000 rpm)by an electric motor.The flywheel is a solid cylinder of mass 250 kg and radius 0.500 m (I_cylinder = MR²/2).If the bus requires an average power of 10.0 kW,how long will the flywheel rotate?

(Multiple Choice)

4.8/5

(37)

Question 29

A system of 3 masses is located as follows: m₁ = m₀ at (0,L),m₂ = 2m₀ at the origin,and m₃ = 3m₀ at (3L,0).Where is the center of mass of these masses?

(Multiple Choice)

4.9/5

(40)

Question 30

A woman who weighs 500 N stands on a 6.0-m-long board that weighs 100 N.The board is supported at each end.The support force at the right end is 3 times the support force at the left end.How far from the right end is the woman standing?

(Multiple Choice)

4.9/5

(35)

Question 31

Three masses are positioned along the x-axis.Their masses and positions are m₁ = m with x₁ = 1.0 m,m₂ = 2m with x₂ = 2.0 m,and m₃ = 9.0m with x₃ = 3.0 m.What is the x-coordinate of the center of mass of this system,to the nearest tenth?

(Multiple Choice)

4.9/5

(30)

Question 32

A uniform,horizontal beam of length 8.0 m and weight 42.4 N is attached at one end to a wall by a pin connection (so that it may rotate).A cable attached to the wall above the pin supports the opposite end.The cable makes an angle of 60.0° with the horizontal.What is the tension in the cable needed to maintain the beam in equilibrium?

(Multiple Choice)

4.7/5

(32)

Question 33

A rod system with a uniform linear density of $\lambda$ = 4.40 kg/m has the shape shown in the figure,with rod 1 the vertical rod and rod 2 the horizontal rod.Rod 1 has length L₁ = 8.00 m,and rod 2 has length L₂ = 7.50 m.Neglect the diameter of the rods. $A rod system with a uniform linear density of \lambda = 4.40 kg/m has the shape shown in the figure,with rod 1 the vertical rod and rod 2 the horizontal rod.Rod 1 has length L<sub>1</sub> = 8.00 m,and rod 2 has length L<sub>2</sub> = 7.50 m.Neglect the diameter of the rods. -What is the center of mass of the system?$ -What is the center of mass of the system?

(Multiple Choice)

4.9/5

(35)

Question 34

A rotating flywheel can be used as a method to store energy.If it is required that such a device be able to store up to a maximum of 2.00 × 10⁶ J when rotating at 400 rad/s,what moment of inertia is required?

(Multiple Choice)

5.0/5

(36)

Question 35

A uniform meterstick balances on a fulcrum placed at the 70.0-cm mark when a weight w is placed at the 90.0-cm mark.What is the weight of the meterstick?

(Multiple Choice)

4.9/5

(36)

Question 36

An object of radius R and moment of inertia I rolls down an incline of height H after starting from rest.Its total kinetic energy at the bottom of the incline:

(Multiple Choice)

5.0/5

(39)

Question 37

A solid sphere,a solid cylinder,and a hoop each have the same mass and radius.If they are spinning at the same angular velocity,which one has the greatest angular momentum?

(Multiple Choice)

4.8/5

(28)

Question 38

A disk has a moment of inertia of 3.0 × 10−⁴ kg·m² and rotates with an angular speed of 3.6 rad/s.What net torque must be applied to bring it to rest within 3.6 s?

(Multiple Choice)

4.7/5

(40)

Question 39

A solid sphere of mass 2.50 kg and radius 0.120 m is at rest at the top of a ramp inclined 15.0°.It rolls to the bottom without slipping.The upper end of the ramp is 1.20 m higher than the lower end.Find the sphere's total kinetic energy when it reaches the bottom.

(Multiple Choice)

4.8/5

(34)

Question 40

Showing 21 - 40 of 82

Exam 8: Rotational Equilibrium and Dynamics

A bucket in an old well is hoisted upward by a rope which winds up on a cylinder having a radius of 0.050 m.How many rev/s must the cylinder turn if the bucket is raised at a speed of 0.250 m/s?

A uniform solid sphere rolls down an incline of height 3 m after starting from rest.In order to calculate its speed at the bottom of the incline,one needs to know:

A baseball pitcher loosens up his pitching arm.He tosses a 0.20-kg ball using only the rotation of his forearm,0.28 m in length,to accelerate the ball.What is the moment of inertia of the ball alone as it moves in a circular arc with a radius of 0.28 m?

A 40-kg boy is standing on the edge of a stationary 30-kg circular platform that is free to rotate.The boy tries to walk around the platform in a counterclockwise direction.As he does:

An object with mass m and moment of inertia I is spinning with an angular momentum L.Its kinetic energy is:

A system of 3 masses is located as follows: m1 = m0 at (0,L),m2 = 2m0 at the origin,and m3 = 3m0 at (3L,0).Where is the center of mass of these masses?

A woman who weighs 500 N stands on a 6.0-m-long board that weighs 100 N.The board is supported at each end.The support force at the right end is 3 times the support force at the left end.How far from the right end is the woman standing?

Three masses are positioned along the x-axis.Their masses and positions are m1 = m with x1 = 1.0 m,m2 = 2m with x2 = 2.0 m,and m3 = 9.0m with x3 = 3.0 m.What is the x-coordinate of the center of mass of this system,to the nearest tenth?

A rotating flywheel can be used as a method to store energy.If it is required that such a device be able to store up to a maximum of 2.00 × 106 J when rotating at 400 rad/s,what moment of inertia is required?

A uniform meterstick balances on a fulcrum placed at the 70.0-cm mark when a weight w is placed at the 90.0-cm mark.What is the weight of the meterstick?

An object of radius R and moment of inertia I rolls down an incline of height H after starting from rest.Its total kinetic energy at the bottom of the incline:

A solid sphere,a solid cylinder,and a hoop each have the same mass and radius.If they are spinning at the same angular velocity,which one has the greatest angular momentum?

A disk has a moment of inertia of 3.0 × 10−4 kg·m2 and rotates with an angular speed of 3.6 rad/s.What net torque must be applied to bring it to rest within 3.6 s?

A solid sphere of mass 2.50 kg and radius 0.120 m is at rest at the top of a ramp inclined 15.0°.It rolls to the bottom without slipping.The upper end of the ramp is 1.20 m higher than the lower end.Find the sphere's total kinetic energy when it reaches the bottom.

Units, Trigonometry, and Vectors

Motion in One Dimension

Motion in Two Dimensions

Newtons Laws of Motion

Energy

Momentum, Impulse, and Collisions

Rotational Motion and Gravitation

Fluids and Solids

Thermal Physics

Energy in Thermal Processes

The Laws of Thermodynamics

Vibrations and Waves

Sound

Electric Forces and Fields

Electrical Energy and Capacitance

Current and Resistance

Direct-Current Circuits

Magnetism

Induced Voltages and Inductance

Alternating-Current Circuits and Electromagnetic Waves

Reflection and Refraction of Light

Mirrors and Lenses

Wave Optics

Optical Instruments

Relativity

Quantum Physics

Atomic Physics

Nuclear Physics

Nuclear Energy and Elementary Particles

Filters

A system of 3 masses is located as follows: m₁ = m₀ at (0,L),m₂ = 2m₀ at the origin,and m₃ = 3m₀ at (3L,0).Where is the center of mass of these masses?

Three masses are positioned along the x-axis.Their masses and positions are m₁ = m with x₁ = 1.0 m,m₂ = 2m with x₂ = 2.0 m,and m₃ = 9.0m with x₃ = 3.0 m.What is the x-coordinate of the center of mass of this system,to the nearest tenth?

A rotating flywheel can be used as a method to store energy.If it is required that such a device be able to store up to a maximum of 2.00 × 10⁶ J when rotating at 400 rad/s,what moment of inertia is required?

A disk has a moment of inertia of 3.0 × 10−⁴ kg·m² and rotates with an angular speed of 3.6 rad/s.What net torque must be applied to bring it to rest within 3.6 s?