Question 1

Which of the following expansion slots is 64-bit?

Accepted Answer

A)  PCIx 
B)  PCI 
C)  ISA 
D)  PCIe 
A)  PCIx 
B)  PCI 
C)  ISA 
D)  PCIe

Question 2

A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:

Accepted Answer

A)  continue to power cycle the server until it boots normally. 
B)  count the beeps and reference the service manual. 
C)  disable the alarm within the server. 
D)  install the server into a different rack. 
A)  continue to power cycle the server until it boots normally. 
B)  count the beeps and reference the service manual. 
C)  disable the alarm within the server. 
D)  install the server into a different rack.

Question 3

A server has a single, half height, PCI-X 3.3v slot available. Which of the following cards can fit in this slot? (Select THREE).

Accepted Answer

A)  Half Height, Universally Keyed PCI card 
B)  Full Height, 3.3v PCI-X card 
C)  Half Height, x16 PCI Express Card 
D)  Half Height, 3.3v PCI card 
E)  Half Height, Universally Keyed PCI-X card
F) Full Height, Universally Keyed PCI card
G) Half Height, x8 PCI Express Card 
A)  Half Height, Universally Keyed PCI card 
B)  Full Height, 3.3v PCI-X card 
C)  Half Height, x16 PCI Express Card 
D)  Half Height, 3.3v PCI card 
E)  Half Height, Universally Keyed PCI-X card
F) Full Height, Universally Keyed PCI card
G) Half Height, x8 PCI Express Card

Question 4

A server that recently received hardware upgrades has begun to experience random BSOD conditions. Which of the following are likely causes of the issue? (Choose two.)

Accepted Answer

A)  Faulty memory 
B)  Data partition error 
C)  Incorrectly seated memory 
D)  Incompatible disk speed 
E)  Uninitialized disk
F) Overallocated memory 
A)  Faulty memory 
B)  Data partition error 
C)  Incorrectly seated memory 
D)  Incompatible disk speed 
E)  Uninitialized disk
F) Overallocated memory

Question 5

A new server has two drives and a RAID controller. Which of the following is an option for configuring the storage on this server?

Accepted Answer

A)  RAID 0 
B)  RAID 5 
C)  RAID 6 
D)  RAID 10 
A)  RAID 0 
B)  RAID 5 
C)  RAID 6 
D)  RAID 10

Question 6

Which of the following default ports should be open on a server for remote administration?

Accepted Answer

A)  TCP 25 
B)  TCP 389 
C)  TCP 3128 
D)  TCP 3389 
A)  TCP 25 
B)  TCP 389 
C)  TCP 3128 
D)  TCP 3389

Question 7

A remote technician is notified that a LED light for a server's hard drive is red. Which of the following should the technician check to verify RAID functionality?

Accepted Answer

A)  Network-based hardware administration 
B)  Access control lists 
C)  File system check 
D)  Connectivity via a serial cable 
A)  Network-based hardware administration 
B)  Access control lists 
C)  File system check 
D)  Connectivity via a serial cable

Question 8

As a best practice, which of the following should be performed before placing a server on a network?

Accepted Answer

A)  Secure the disk 
B)  Secure the server rack 
C)  Harden the OS 
D)  Install the application 
A)  Secure the disk 
B)  Secure the server rack 
C)  Harden the OS 
D)  Install the application

Question 9

An administrator has 120V, 150-amp service in the datacenter. Which of the following is the MAXIMUM number of servers with a faceplate rating of 65W that can be racked in the datacenter?

Accepted Answer

A)  200 
B)  225 
C)  250 
D)  275 
E)  300 
A)  200 
B)  225 
C)  250 
D)  275 
E)  300

Question 10

A technician is configuring the IP networking portion on a server installation. Which of the following types of IP addresses would be BEST to use for this server?

Accepted Answer

A)  APIPA 
B)  Dynamic 
C)  Static 
D)  Reserved 
A)  APIPA 
B)  Dynamic 
C)  Static 
D)  Reserved

Question 11

A server technician needs to connect two servers with gigabit NICs without MDI-X in order to transfer files between them and is unable to locate a switch with gigabit ports. Which of the following types of cables would allow the technician to connect the servers to obtain the FASTEST transfer rate possible?

Accepted Answer

A)  Rollover cables 
B)  CAT6 crossover cables 
C)  CAT6 straight-through cables 
D)  CAT5 straight-through cables 
A)  Rollover cables 
B)  CAT6 crossover cables 
C)  CAT6 straight-through cables 
D)  CAT5 straight-through cables

Question 12

An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?

Accepted Answer

A)  23 
B)  389 
C)  443 
D)  445 
A)  23 
B)  389 
C)  443 
D)  445

Question 13

A datacenter recently experienced a breach committed by a group that was able to access a server that had been shut down but not disconnected from the network. Which of the following could have prevented the breach from occurring?

Accepted Answer

A)  Disabling WOL in the server BIOS 
B)  Shutting down unneeded ports on the server 
C)  Installing anti-malware software on the server 
D)  Disabling non-essential services on the server 
A)  Disabling WOL in the server BIOS 
B)  Shutting down unneeded ports on the server 
C)  Installing anti-malware software on the server 
D)  Disabling non-essential services on the server

Question 14

A technician is implementing a RAID 10 array on a server. Which of the following is the MINIMUM number of disks needed for this array?

Accepted Answer

A)  Two 
B)  Three 
C)  Four 
D)  Five 
A)  Two 
B)  Three 
C)  Four 
D)  Five

Question 15

Which of the following would be an advantage to using a blade server as opposed to a rack mount server?

Accepted Answer

A)  Blade servers allow for internal tape drives 
B)  Blade servers offer more rack density 
C)  Blade servers are typically faster 
D)  Blade servers allow for more RAM 
A)  Blade servers allow for internal tape drives 
B)  Blade servers offer more rack density 
C)  Blade servers are typically faster 
D)  Blade servers allow for more RAM

Question 16

Which of the following factors would cause a technician to select a hard drive over an SSD as a primary storage medium?

Accepted Answer

A)  Speed 
B)  Power consumption 
C)  Form factor 
D)  Cost 
A)  Speed 
B)  Power consumption 
C)  Form factor 
D)  Cost

Question 17

A technician has a server with ten hard drives in a RAID 6 configuration. Which of the following is the MAXIMUM number of drives that can fail in the array while maintaining data integrity?

Accepted Answer

A)  1 
B)  2 
C)  3 
D)  4 
A)  1 
B)  2 
C)  3 
D)  4

Question 18

During a lunch-and-learn session, IT staff and members participate in virtualization trivia. Which of the following are valid answers about hosts, guests, virtual NICs, and virtual switches? (Select TWO).

Accepted Answer

A)  A host contains virtual switches and virtual NICs. 
B)  A guest contains one or more virtual NICs. 
C)  A hypervisor is installed on a guest. 
D)  A hypervisor is installed on a host. 
E)  A guest contains one or more physical NICs. 
A)  A host contains virtual switches and virtual NICs. 
B)  A guest contains one or more virtual NICs. 
C)  A hypervisor is installed on a guest. 
D)  A hypervisor is installed on a host. 
E)  A guest contains one or more physical NICs.

Question 19

The logs on a server in a datacenter indicate that the server unexpectedly shut down minutes after the night cleaning crew started their shift. Which of the following is the MOST likely reason for the shut down?

Accepted Answer

A)  A hard disk on the server failed. 
B)  A power surge occurred. 
C)  The CPU on the server overheated. 
D)  A memory module on the server failed. 
A)  A hard disk on the server failed. 
B)  A power surge occurred. 
C)  The CPU on the server overheated. 
D)  A memory module on the server failed.

Question 20

An office in another location with hardware and equipment with replicated data is called a:

Accepted Answer

A)  warm site. 
B)  hot site. 
C)  cold site. 
D)  duplicated site. 
A)  warm site. 
B)  hot site. 
C)  cold site. 
D)  duplicated site.

Which of the following expansion slots is 64-bit?

A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:

A server has a single, half height, PCI-X 3.3v slot available. Which of the following cards can fit in this slot? (Select THREE).

A server that recently received hardware upgrades has begun to experience random BSOD conditions. Which of the following are likely causes of the issue? (Choose two.)

A new server has two drives and a RAID controller. Which of the following is an option for configuring the storage on this server?

Which of the following default ports should be open on a server for remote administration?

A remote technician is notified that a LED light for a server's hard drive is red. Which of the following should the technician check to verify RAID functionality?

As a best practice, which of the following should be performed before placing a server on a network?

An administrator has 120V, 150-amp service in the datacenter. Which of the following is the MAXIMUM number of servers with a faceplate rating of 65W that can be racked in the datacenter?

A technician is configuring the IP networking portion on a server installation. Which of the following types of IP addresses would be BEST to use for this server?

An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?

A datacenter recently experienced a breach committed by a group that was able to access a server that had been shut down but not disconnected from the network. Which of the following could have prevented the breach from occurring?

A technician is implementing a RAID 10 array on a server. Which of the following is the MINIMUM number of disks needed for this array?

Which of the following would be an advantage to using a blade server as opposed to a rack mount server?

Which of the following factors would cause a technician to select a hard drive over an SSD as a primary storage medium?

A technician has a server with ten hard drives in a RAID 6 configuration. Which of the following is the MAXIMUM number of drives that can fail in the array while maintaining data integrity?

During a lunch-and-learn session, IT staff and members participate in virtualization trivia. Which of the following are valid answers about hosts, guests, virtual NICs, and virtual switches? (Select TWO).

The logs on a server in a datacenter indicate that the server unexpectedly shut down minutes after the night cleaning crew started their shift. Which of the following is the MOST likely reason for the shut down?

An office in another location with hardware and equipment with replicated data is called a:

CompTIA A+ Certification Exam: Core 1

CompTIA A+ Certification Exam: Core 2

CompTIA Advanced Security Practitioner (CASP+) CAS-003

CompTIA Advanced Security Practitioner (CASP+) CAS-004

CompTIA Cloud Essentials+

CompTIA CySA+ Certification Exam (CS0-002)

CompTIA Cloud+ (CV0-002)

CompTIA Cloud+

CompTIA IT Fundamentals

CompTIA Network+

CompTIA Project+

CompTIA PenTest+ Certification Exam

CompTIA Server+

CompTIA Security+

CompTIA Security+ 2021

CompTIA CTT+ Essentials

CompTIA Linux+

Filters

Exam 14: CompTIA Server+ Certification Exam

Which of the following expansion slots is 64-bit?

A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:

A server has a single, half height, PCI-X 3.3v slot available. Which of the following cards can fit in this slot? (Select THREE).

A server that recently received hardware upgrades has begun to experience random BSOD conditions. Which of the following are likely causes of the issue? (Choose two.)

A new server has two drives and a RAID controller. Which of the following is an option for configuring the storage on this server?

Which of the following default ports should be open on a server for remote administration?

A remote technician is notified that a LED light for a server's hard drive is red. Which of the following should the technician check to verify RAID functionality?

As a best practice, which of the following should be performed before placing a server on a network?

An administrator has 120V, 150-amp service in the datacenter. Which of the following is the MAXIMUM number of servers with a faceplate rating of 65W that can be racked in the datacenter?

A technician is configuring the IP networking portion on a server installation. Which of the following types of IP addresses would be BEST to use for this server?

An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?

A datacenter recently experienced a breach committed by a group that was able to access a server that had been shut down but not disconnected from the network. Which of the following could have prevented the breach from occurring?

A technician is implementing a RAID 10 array on a server. Which of the following is the MINIMUM number of disks needed for this array?

Which of the following would be an advantage to using a blade server as opposed to a rack mount server?

Which of the following factors would cause a technician to select a hard drive over an SSD as a primary storage medium?

A technician has a server with ten hard drives in a RAID 6 configuration. Which of the following is the MAXIMUM number of drives that can fail in the array while maintaining data integrity?

During a lunch-and-learn session, IT staff and members participate in virtualization trivia. Which of the following are valid answers about hosts, guests, virtual NICs, and virtual switches? (Select TWO).

The logs on a server in a datacenter indicate that the server unexpectedly shut down minutes after the night cleaning crew started their shift. Which of the following is the MOST likely reason for the shut down?

An office in another location with hardware and equipment with replicated data is called a:

CompTIA A+ Certification Exam: Core 1

CompTIA A+ Certification Exam: Core 2

CompTIA Advanced Security Practitioner (CASP+) CAS-003

CompTIA Advanced Security Practitioner (CASP+) CAS-004

CompTIA Cloud Essentials+

CompTIA CySA+ Certification Exam (CS0-002)

CompTIA Cloud+ (CV0-002)

CompTIA Cloud+

CompTIA IT Fundamentals

CompTIA Network+

CompTIA Project+

CompTIA PenTest+ Certification Exam

CompTIA Server+

CompTIA Security+

CompTIA Security+ 2021

CompTIA CTT+ Essentials

CompTIA Linux+

Filters