Question 1

Seven points in succession,all increasing or decreasing in a process chart are called ________.

Accepted Answer

process drift

Question 2

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called ________.

Accepted Answer

systematic sampling

Question 3

A measurement to determine if a defect is either present or not is known as a(n)________.

Accepted Answer

attribute

Question 4

Graphs designed to signal process workers when nonrandom variation occurs in a process are called ________.

Accepted Answer

The answer of Graphs designed to signal process workers when...

Question 5

The control chart used to measure the proportion defective is called the u chart.

Accepted Answer

A) True 
 B)False

Question 6

Use the information below to answer the following question(s). Use the "Factors for Control Limits" Table A.3 from the textbook where required:
   
A control chart needs to be developed to determine if the temperature for a process is within control limits. Five samples each having 4 observations are taken and the sample measurements (temperature in degrees F)are noted in the table below:
 $$\begin{array} { | l | l | l | l | l | } 
\hline \text { Sample } & \text { Observation } 1 & \text { Observation } 2 & \text { Observation } 3 & \text { Observation 4 } \
\hline 1 & 250 & 253.5 & 249 & 251.2 \
\hline 2 & 252 & 250.3 & 252 & 249.5 \
\hline 3 & 247.6 & 251 & 250 & 249.8 \
\hline 4 & 253.5 & 249 & 251 & 250.3 \
\hline 5 & 252 & 248.5 & 249.8 & 250.7 \
\hline
\end{array}$$
-What is the LCL for a X-bar chart?

Accepted Answer

A) 253.218 
B) 247.852 
C) 250 
D) 252.527 
A) 253.218 
B) 247.852 
C) 250 
D) 252.527

Question 7

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called

Accepted Answer

A) systematic samples. 
B) random samples. 
C) nonrandom samples. 
D) biased samples. 
A) systematic samples. 
B) random samples. 
C) nonrandom samples. 
D) biased samples.

Question 8

Variation that centers on a mean and occurs with a somewhat consistent amount of dispersion is known as ________ variation.

Accepted Answer

random or

Question 9

Concluding that a process is stable means only ________ variation is present in the process.

Accepted Answer

The answer of Concluding that a process is stable means...

Question 10

A process capability measure of 1.00 or below indicates that the process is capable.

Accepted Answer

A) True 
 B)False

Question 11

The control chart used to measure the proportion defective is called the

Accepted Answer

A) p-chart. 
B) R-chart. 
C) c-chart. 
D) u-chart. 
A) p-chart. 
B) R-chart. 
C) c-chart. 
D) u-chart.

Question 12

Fifty sample measurements of the length of an automotive component yield a grand mean of 1.33 inches with an estimated standard deviation of 0.2 inches.The specification length is between 1.2 and 1.4 inches.Is the process capable of meeting the required specifications?

Accepted Answer

A) Yes 
B) No 
C) Insufficient information to determine 
D) Barely capable 
A) Yes 
B) No 
C) Insufficient information to determine 
D) Barely capable

Question 13

The ability of a process to produce a product that meets specification is known as ________.

Accepted Answer

The answer of The ability of a process to produce...

Question 14

A process that is stable has no variation present in the process.

Accepted Answer

A) True 
 B)False

Question 15

A measurement to determine if a defect is either present or not is known as

Accepted Answer

A) attribute. 
B) variable. 
C) systematic. 
D) proportion. 
A) attribute. 
B) variable. 
C) systematic. 
D) proportion.

Question 16

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called systematic samples.

Accepted Answer

A) True 
 B)False

Question 17

A continuous measurement such as weight,height,or volume is known as

Accepted Answer

A) attribute. 
B) variable. 
C) systematic. 
D) proportion. 
A) attribute. 
B) variable. 
C) systematic. 
D) proportion.

Question 18

A continuous measurement such as weight,height,or volume is known as an attribute.

Accepted Answer

A) True 
 B)False

Question 19

Use the information below to answer the following question(s). Use the "Factors for Control Limits" Table A.3 from the textbook where required:
   
A control chart needs to be developed to determine if the temperature for a process is within control limits. Five samples each having 4 observations are taken and the sample measurements (temperature in degrees F)are noted in the table below:
 $$\begin{array} { | l | l | l | l | l | } 
\hline \text { Sample } & \text { Observation } 1 & \text { Observation } 2 & \text { Observation } 3 & \text { Observation 4 } \
\hline 1 & 250 & 253.5 & 249 & 251.2 \
\hline 2 & 252 & 250.3 & 252 & 249.5 \
\hline 3 & 247.6 & 251 & 250 & 249.8 \
\hline 4 & 253.5 & 249 & 251 & 250.3 \
\hline 5 & 252 & 248.5 & 249.8 & 250.7 \
\hline
\end{array}$$
-What is the value of the average range R-bar?

Accepted Answer

A) 3.68 
B) 8.398 
C) 3.125 
D) 5.252 
A) 3.68 
B) 8.398 
C) 3.125 
D) 5.252

Question 20

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called ________.

Accepted Answer

The answer of Samples gathered in such a way that...

Seven points in succession,all increasing or decreasing in a process chart are called ________.

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called ________.

A measurement to determine if a defect is either present or not is known as a(n)________.

Graphs designed to signal process workers when nonrandom variation occurs in a process are called ________.

The control chart used to measure the proportion defective is called the u chart.

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called

Variation that centers on a mean and occurs with a somewhat consistent amount of dispersion is known as ________ variation.

Concluding that a process is stable means only ________ variation is present in the process.

A process capability measure of 1.00 or below indicates that the process is capable.

The control chart used to measure the proportion defective is called the

Fifty sample measurements of the length of an automotive component yield a grand mean of 1.33 inches with an estimated standard deviation of 0.2 inches.The specification length is between 1.2 and 1.4 inches.Is the process capable of meeting the required specifications?

The ability of a process to produce a product that meets specification is known as ________.

A process that is stable has no variation present in the process.

A measurement to determine if a defect is either present or not is known as

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called systematic samples.

A continuous measurement such as weight,height,or volume is known as

A continuous measurement such as weight,height,or volume is known as an attribute.

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called ________.

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Product and Process Design and Mapping

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Lean and Six Sigma Management and Leading Change

Filters

Exam 14: Statistical Process Control

Seven points in succession,all increasing or decreasing in a process chart are called ________.

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called ________.

A measurement to determine if a defect is either present or not is known as a(n)________.

Graphs designed to signal process workers when nonrandom variation occurs in a process are called ________.

The control chart used to measure the proportion defective is called the u chart.

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called

Variation that centers on a mean and occurs with a somewhat consistent amount of dispersion is known as ________ variation.

Concluding that a process is stable means only ________ variation is present in the process.

A process capability measure of 1.00 or below indicates that the process is capable.

The control chart used to measure the proportion defective is called the

Fifty sample measurements of the length of an automotive component yield a grand mean of 1.33 inches with an estimated standard deviation of 0.2 inches.The specification length is between 1.2 and 1.4 inches.Is the process capable of meeting the required specifications?

The ability of a process to produce a product that meets specification is known as ________.

A process that is stable has no variation present in the process.

A measurement to determine if a defect is either present or not is known as

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called systematic samples.

A continuous measurement such as weight,height,or volume is known as

A continuous measurement such as weight,height,or volume is known as an attribute.

Samples gathered in such a way that every piece of product has an equal chance of being selected for inspection are called ________.

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Product and Process Design and Mapping

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Lean and Six Sigma Management and Leading Change

Filters