Question 1

A process that is out of control exhibits ________ variation.

Accepted Answer

The answer of A process that is out of control...

Question 2

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).Where should the priority to inspect first be?

Accepted Answer

A) A 
B) B 
C) C 
D) None of the above 
A) A 
B) B 
C) C 
D) None of the above

Question 3

The control chart used to monitor the dispersion of a process is called a(n)________ chart.

Accepted Answer

The answer of The control chart used to monitor the...

Question 4

The control chart used to count the number nonconforming in a consistent sample space is called the ________ chart.

Accepted Answer

The answer of The control chart used to count the...

Question 5

A control chart needs to be developed to determine if the temperature for a process is within control limits.The control chart which would be most appropriate to use in this situation would be the

Accepted Answer

A) p-chart. 
B) X-bar chart. 
C) c-chart. 
D) u-chart. 
A) p-chart. 
B) X-bar chart. 
C) c-chart. 
D) u-chart.

Question 6

The control chart used to count the number nonconforming in a consistent sample space is called the c chart.

Accepted Answer

A) True 
 B)False

Question 7

The width of a distribution is called the mean.

Accepted Answer

A) True 
 B)False

Question 8

Use the information below to answer the following question(s). Use the "Factors for Control Limits" Table A.3 from the textbook where required:
   
A control chart needs to be developed to determine if the temperature for a process is within control limits. Five samples each having 4 observations are taken and the sample measurements (temperature in degrees F)are noted in the table below:
 $$\begin{array} { | l | l | l | l | l | } 
\hline \text { Sample } & \text { Observation } 1 & \text { Observation } 2 & \text { Observation } 3 & \text { Observation 4 } \
\hline 1 & 250 & 253.5 & 249 & 251.2 \
\hline 2 & 252 & 250.3 & 252 & 249.5 \
\hline 3 & 247.6 & 251 & 250 & 249.8 \
\hline 4 & 253.5 & 249 & 251 & 250.3 \
\hline 5 & 252 & 248.5 & 249.8 & 250.7 \
\hline
\end{array}$$
-What is the value of the grand mean?

Accepted Answer

A) 249.325 
B) 251.300 
C) 250.535 
D) 248.500 
A) 249.325 
B) 251.300 
C) 250.535 
D) 248.500

Question 9

The control chart used to measure the proportion defective is called the ________ chart.

Accepted Answer

The answer of The control chart used to measure the...

Question 10

A comparative measure of the extent to which individual products meet specification is known as ________.

Accepted Answer

The answer of A comparative measure of the extent to...

Question 11

The central limit theorem states that sampling distributions generally are ________ distributed.

Accepted Answer

The answer of The central limit theorem states that sampling...

Question 12

A continuous measurement such as weight,height,or volume is known as a ________.

Accepted Answer

The answer of A continuous measurement such as weight,height,or volume...

Question 13

Each point on the control chart represents data from samples that are plotted sequentially over time.

Accepted Answer

A) True 
 B)False

Question 14

A process which is in control is always a capable process.

Accepted Answer

A) True 
 B)False

Question 15

Samples which are ordered by time or sequence are called ________.

Accepted Answer

The answer of Samples which are ordered by time or...

Question 16

Quality inspection performed during the production process is called ________.

Accepted Answer

in-process

Question 17

A bottling plant measures the volume of liquid in the bottle.The control chart which will be used with such a measurement is a

Accepted Answer

A) p-chart. 
B) X-bar chart. 
C) c-chart. 
D) u-chart. 
A) p-chart. 
B) X-bar chart. 
C) c-chart. 
D) u-chart.

Question 18

The control chart used to count the number nonconforming in a consistent sample space is called the

Accepted Answer

A) p-chart. 
B) R-chart. 
C) c-chart. 
D) u-chart. 
A) p-chart. 
B) R-chart. 
C) c-chart. 
D) u-chart.

Question 19

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).What is the inspection ratio for B?

Accepted Answer

A) 0.10 
B) 0.08 
C) 0.12 
D) 0.05 
A) 0.10 
B) 0.08 
C) 0.12 
D) 0.05

Question 20

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called

Accepted Answer

A) systematic sampling. 
B) random sampling. 
C) nonrandom sampling. 
D) biased sampling. 
A) systematic sampling. 
B) random sampling. 
C) nonrandom sampling. 
D) biased sampling.

A process that is out of control exhibits ________ variation.

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).Where should the priority to inspect first be?

The control chart used to monitor the dispersion of a process is called a(n)________ chart.

The control chart used to count the number nonconforming in a consistent sample space is called the ________ chart.

A control chart needs to be developed to determine if the temperature for a process is within control limits.The control chart which would be most appropriate to use in this situation would be the

The control chart used to count the number nonconforming in a consistent sample space is called the c chart.

The width of a distribution is called the mean.

The control chart used to measure the proportion defective is called the ________ chart.

A comparative measure of the extent to which individual products meet specification is known as ________.

The central limit theorem states that sampling distributions generally are ________ distributed.

A continuous measurement such as weight,height,or volume is known as a ________.

Each point on the control chart represents data from samples that are plotted sequentially over time.

A process which is in control is always a capable process.

Samples which are ordered by time or sequence are called ________.

Quality inspection performed during the production process is called ________.

A bottling plant measures the volume of liquid in the bottle.The control chart which will be used with such a measurement is a

The control chart used to count the number nonconforming in a consistent sample space is called the

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).What is the inspection ratio for B?

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Product and Process Design and Mapping

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Lean and Six Sigma Management and Leading Change

Filters

Exam 14: Statistical Process Control

A process that is out of control exhibits ________ variation.

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).Where should the priority to inspect first be?

The control chart used to monitor the dispersion of a process is called a(n)________ chart.

The control chart used to count the number nonconforming in a consistent sample space is called the ________ chart.

A control chart needs to be developed to determine if the temperature for a process is within control limits.The control chart which would be most appropriate to use in this situation would be the

The control chart used to count the number nonconforming in a consistent sample space is called the c chart.

The width of a distribution is called the mean.

The control chart used to measure the proportion defective is called the ________ chart.

A comparative measure of the extent to which individual products meet specification is known as ________.

The central limit theorem states that sampling distributions generally are ________ distributed.

A continuous measurement such as weight,height,or volume is known as a ________.

Each point on the control chart represents data from samples that are plotted sequentially over time.

A process which is in control is always a capable process.

Samples which are ordered by time or sequence are called ________.

Quality inspection performed during the production process is called ________.

A bottling plant measures the volume of liquid in the bottle.The control chart which will be used with such a measurement is a

The control chart used to count the number nonconforming in a consistent sample space is called the

The cost of inspection for three different product characteristics A,B,and C,is $10,$12 and $8 respectively.The cost of failure if any one of them breaks down is $100 (full replacement cost of the product).What is the inspection ratio for B?

Every 10th product coming off a production line is inspected to check for quality.Such a sampling technique is called

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Product and Process Design and Mapping

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Lean and Six Sigma Management and Leading Change

Filters