Question 1

______ micrometers measure the depth of an item, such as how far a piston is below the surface of the block.

Accepted Answer

A)  Outside 
B)  Inside 
C)  Depth 
D)  Metric 
A)  Outside 
B)  Inside 
C)  Depth 
D)  Metric

Question 2

Not many torque specifications call for the nuts and bolts to have dry threads prior to tightening.

Accepted Answer

A) True 
 B)False

Question 3

All of the following tools are considered portable, EXCEPT:

Accepted Answer

A)  hand tools. 
B)  scan tool. 
C)  electrical meters. 
D)  hoist. 
A)  hand tools. 
B)  scan tool. 
C)  electrical meters. 
D)  hoist.

Question 4

_____ micrometers have a horseshoe-shaped frame.

Accepted Answer

A)  Inside 
B)  Outside 
C)  Depth 
D)  Standard 
A)  Inside 
B)  Outside 
C)  Depth 
D)  Standard

Question 5

Specialized manufacturer tools are shared by everyone in the shop. Technician A says that it is critical that they are inspected for damage. Technician B says that they should be put in their proper storage space after each use. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B 
A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 6

The forcing screw is a _________ bolt that is applied to the center of the cross-arm.

Accepted Answer

A)  Short, coarse-threaded 
B)  Short, fine-threaded 
C)  Long, fine-threaded 
D)  Long, coarse-threaded 
A)  Short, coarse-threaded 
B)  Short, fine-threaded 
C)  Long, fine-threaded 
D)  Long, coarse-threaded

Question 7

When installing a rivet, a good rule of thumb is to allow at least _______ the diameter of the rivet stem as clearance from any edge.

Accepted Answer

A)  Three times 
B)  Half 
C)  Three-quarters 
D)  Twice 
A)  Three times 
B)  Half 
C)  Three-quarters 
D)  Twice

Question 8

Technician A states that a tap handle has a right-angled jaw that matches the squared end of all the taps. Technician B states that to cut a thread in an awkward space, a T-shaped tap handle is very convenient. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both Technician A and Technician B 
D)  Neither Technician A nor Technician B 
A)  Technician A 
B)  Technician B 
C)  Both Technician A and Technician B 
D)  Neither Technician A nor Technician B

Question 9

When tightening lug fasteners, an impact wrench should:

Accepted Answer

A)  always be used. 
B)  never be used. 
C)  be used in difficult-to-access positions. 
D)  never be used in high-torque settings. 
A)  always be used. 
B)  never be used. 
C)  be used in difficult-to-access positions. 
D)  never be used in high-torque settings.

Question 10

Which of the following is a type of measuring gauge used in automotive shops?

Accepted Answer

A)  Telescoping gauge 
B)  Split ball gauge 
C)  Both A and B 
D)  None of the above 
A)  Telescoping gauge 
B)  Split ball gauge 
C)  Both A and B 
D)  None of the above

Question 11

The traditional Allen wrench is a hexagonal bar with a right-angle bend at one end.

Accepted Answer

A) True 
 B)False

Question 12

Which of the following is a cutting tool?

Accepted Answer

A)  Bolt cutters 
B)  Tin snips 
C)  Aviation snips 
D)  All of the above 
A)  Bolt cutters 
B)  Tin snips 
C)  Aviation snips 
D)  All of the above

Question 13

The single flare is ________.

Accepted Answer

A)  For tubing carrying low pressures like a fuel line 
B)  For higher pressures such as in a brake system 
C)  The metric version used in brake systems 
D)  None of the above 
A)  For tubing carrying low pressures like a fuel line 
B)  For higher pressures such as in a brake system 
C)  The metric version used in brake systems 
D)  None of the above

Question 14

Which of these are used for holding the gears in the proper position on the shaft once the gears are installed?

Accepted Answer

A)  Parallel grooves in a shaft 
B)  Shoulders 
C)  Snap rings and thrust washers 
D)  Bearings 
A)  Parallel grooves in a shaft 
B)  Shoulders 
C)  Snap rings and thrust washers 
D)  Bearings

Question 15

Tech A says that knowing how to use tools correctly creates a safe working environment. Tech B says that a flare nut wrench is used to loosen very tight bolts and nuts. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 16

At the end of each working week, clean the tools and equipment you used and check them for any damage.

Accepted Answer

A) True 
 B)False

Question 17

When selecting rivets to suit the job, consider the _______.

Accepted Answer

A)  Diameter 
B)  Length 
C)  Rivet material 
D)  All of the above 
A)  Diameter 
B)  Length 
C)  Rivet material 
D)  All of the above

Question 18

Never take measurements from the very end of a damaged steel rule, as damaged ends may affect the accuracy of your measurements.

Accepted Answer

A) True 
 B)False

Question 19

All of the following are important things to remember when using tools, EXCEPT:

Accepted Answer

A)  Select the correct tool(s) to undertake tasks. 
B)  Clean tools prior to use if necessary. 
C)  Return tools to correct storage locations. 
D)  None of the answers listed 
A)  Select the correct tool(s) to undertake tasks. 
B)  Clean tools prior to use if necessary. 
C)  Return tools to correct storage locations. 
D)  None of the answers listed

Question 20

Always store vernier calipers in a storage box to protect them and ensure the measuring surfaces are kept clean for accurate measurement.

Accepted Answer

A) True 
 B)False

Exam 3: Basic Tools and Precision Measuring

______ micrometers measure the depth of an item, such as how far a piston is below the surface of the block.

Not many torque specifications call for the nuts and bolts to have dry threads prior to tightening.

All of the following tools are considered portable, EXCEPT:

_____ micrometers have a horseshoe-shaped frame.

Specialized manufacturer tools are shared by everyone in the shop. Technician A says that it is critical that they are inspected for damage. Technician B says that they should be put in their proper storage space after each use. Who is correct?

The forcing screw is a _________ bolt that is applied to the center of the cross-arm.

When installing a rivet, a good rule of thumb is to allow at least _______ the diameter of the rivet stem as clearance from any edge.

Technician A states that a tap handle has a right-angled jaw that matches the squared end of all the taps. Technician B states that to cut a thread in an awkward space, a T-shaped tap handle is very convenient. Who is correct?

When tightening lug fasteners, an impact wrench should:

Which of the following is a type of measuring gauge used in automotive shops?

The traditional Allen wrench is a hexagonal bar with a right-angle bend at one end.

Which of the following is a cutting tool?

The single flare is ________.

Which of these are used for holding the gears in the proper position on the shaft once the gears are installed?

Tech A says that knowing how to use tools correctly creates a safe working environment. Tech B says that a flare nut wrench is used to loosen very tight bolts and nuts. Who is correct?

At the end of each working week, clean the tools and equipment you used and check them for any damage.

When selecting rivets to suit the job, consider the _______.

Never take measurements from the very end of a damaged steel rule, as damaged ends may affect the accuracy of your measurements.

All of the following are important things to remember when using tools, EXCEPT:

Always store vernier calipers in a storage box to protect them and ensure the measuring surfaces are kept clean for accurate measurement.

Strategy-Based Diagnostics

Safety

Fasteners and Thread Repair

Vehicle, Customer, and Service Information

Automatic Transmission Fundamentals

Transmission Components

Hydraulic Fundamentals

Torque Converter Principles

Hydraulically Controlled Transmission

Electronically Controlled Transmission

In-Vehicle Transmission Repairs

Transmission Removal

Transmission Disassembly

Hydraulic System Rebuilding

Gear Train Rebuilding

Valve Body and Electric Service

Transmission Reassembly

Transmission Reinstallation

Dual Clutch Transmissions

Continuously Variable Transmissions

Hybrid Transmissions

Honda Transmissions

Chrysler 6 Speed 62te Transmission

6t40 6f35 Transmission

Zf 9hp Chrysler 948te Transmission

Ford 6r60 Zf6hp26

Allison 1000 and 2000 Series Transmissions

Filters