Question 1

A ____________________ and a horizontal branch are often the same pipe,depending on the complexity of piping configuration.

Accepted Answer

Fixture branch

Question 2

MATCHING
Match the following terms:
-Special vent similar to a circuit vent,except it terminates connecting to a stack vent instead of a vent stack;only used on a top floor or at the highest branch interval.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent A

Question 3

What are the two legal methods of waste termination?

Accepted Answer

A public sewer system or a private septic tank are two common points of disposal that are utilized as legal means of termination.

Question 4

List the major components of a domestic water vent.

Accepted Answer

Branch Vent
Circuit Vent
Fixtu

Question 5

Most codes allow any pipe greater than 8" to be served with a 4" cleanout.

Accepted Answer

A) True 
 B)False

Question 6

MATCHING
Match the following terms:
-Dimension a trap weir is located from its protective vent.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 7

The IPC and UPC have some different drainage fixture unit values and and minimum trap and drain sizes for the same fixtures.

Accepted Answer

A) True 
 B)False

Question 8

MATCHING
Match the following terms:
-Vertical pipe that is at least one story in height.Can be installed with horizontal offsets.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 9

All relief vents are sized based on their specific use and determined by using a codebook,but cannot be less than __________ the diameter of the drain they serve,and no smaller than __________".

Accepted Answer

The answer of All relief vents are sized based on...

Question 10

Most codes only allow a maximum of three toilets on a 3" horizontal branch.

Accepted Answer

A) True 
 B)False

Question 11

All codes dictate that no vent be extended to open air.

Accepted Answer

A) True 
 B)False

Question 12

MATCHING
Match the following terms:
-Vertical pipe conveying wastewater that contains fecal matter;is the same pipe as a waste stack and can be installed with horizontal offsets.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 13

A fixture drain installed aboveground is sized based on the particular fixture served.

Accepted Answer

A) True 
 B)False

Question 14

MATCHING
Match the following terms:
-Pipe circulating air between a drainage and vent system.It has several specific areas of installation and is sized based on its use.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 15

All horizontal drains must have adequate slope to evacuate wastewater and solids.

Accepted Answer

A) True 
 B)False

Question 16

MATCHING
Match the following terms:
-Trade name for percolation test;a method to evaluate percolation conditions of soil.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 17

____________________ is a drain for allowable fixtures being utilized as a vent for other fixtures.

Accepted Answer

The answer of ____________________ is a drain for allowable fixtures...

Question 18

MATCHING
Match the following terms:
-Abbreviated as dfu;a determining factor based on rate of flow measured in gallons per minute or liters per second into a drainage system from a plumbing fixture;used to size pipe.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 19

The building drain is sized based on the drainage load of the entire system,and minimum sizing is dictated by codes.

Accepted Answer

A) True 
 B)False

Question 20

MATCHING
Match the following terms:
-Fabricated holding tank or structure to contain sewage and solids.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

A ____________________ and a horizontal branch are often the same pipe,depending on the complexity of piping configuration.

MATCHING Match the following terms: -Special vent similar to a circuit vent,except it terminates connecting to a stack vent instead of a vent stack;only used on a top floor or at the highest branch interval.

What are the two legal methods of waste termination?

List the major components of a domestic water vent.

Most codes allow any pipe greater than 8" to be served with a 4" cleanout.

MATCHING Match the following terms: -Dimension a trap weir is located from its protective vent.

The IPC and UPC have some different drainage fixture unit values and and minimum trap and drain sizes for the same fixtures.

MATCHING Match the following terms: -Vertical pipe that is at least one story in height.Can be installed with horizontal offsets.

All relief vents are sized based on their specific use and determined by using a codebook,but cannot be less than the diameter of the drain they serve,and no smaller than ".

Most codes only allow a maximum of three toilets on a 3" horizontal branch.

All codes dictate that no vent be extended to open air.

MATCHING Match the following terms: -Vertical pipe conveying wastewater that contains fecal matter;is the same pipe as a waste stack and can be installed with horizontal offsets.

A fixture drain installed aboveground is sized based on the particular fixture served.

MATCHING Match the following terms: -Pipe circulating air between a drainage and vent system.It has several specific areas of installation and is sized based on its use.

All horizontal drains must have adequate slope to evacuate wastewater and solids.

MATCHING Match the following terms: -Trade name for percolation test;a method to evaluate percolation conditions of soil.

____________________ is a drain for allowable fixtures being utilized as a vent for other fixtures.

MATCHING Match the following terms: -Abbreviated as dfu;a determining factor based on rate of flow measured in gallons per minute or liters per second into a drainage system from a plumbing fixture;used to size pipe.

The building drain is sized based on the drainage load of the entire system,and minimum sizing is dictated by codes.

MATCHING Match the following terms: -Fabricated holding tank or structure to contain sewage and solids.

Plumbers Toolbox

Power Tools

Types of Pipe

Fittings

Valves and Devices

Fixtures

Faucets and Drain Assemblies

Plumbing Equipment and Appliances

Blueprint Reading and Drafting

Material Organization and Layout

Water Service Installation

Water Distribution Installation

Drainage,waste,and Vent Installation

Fixture and Equipment Installation

Plumbing Repairs and Troubleshooting

Hydronic Heat

Filters

Exam 13: Drainage,waste,and Vent Segments and Sizing

A ____________________ and a horizontal branch are often the same pipe,depending on the complexity of piping configuration.

MATCHING Match the following terms: -Special vent similar to a circuit vent,except it terminates connecting to a stack vent instead of a vent stack;only used on a top floor or at the highest branch interval.

What are the two legal methods of waste termination?

List the major components of a domestic water vent.

Most codes allow any pipe greater than 8" to be served with a 4" cleanout.

MATCHING Match the following terms: -Dimension a trap weir is located from its protective vent.

The IPC and UPC have some different drainage fixture unit values and and minimum trap and drain sizes for the same fixtures.

MATCHING Match the following terms: -Vertical pipe that is at least one story in height.Can be installed with horizontal offsets.

All relief vents are sized based on their specific use and determined by using a codebook,but cannot be less than __________ the diameter of the drain they serve,and no smaller than __________".

Most codes only allow a maximum of three toilets on a 3" horizontal branch.

All codes dictate that no vent be extended to open air.

MATCHING Match the following terms: -Vertical pipe conveying wastewater that contains fecal matter;is the same pipe as a waste stack and can be installed with horizontal offsets.

A fixture drain installed aboveground is sized based on the particular fixture served.

MATCHING Match the following terms: -Pipe circulating air between a drainage and vent system.It has several specific areas of installation and is sized based on its use.

All horizontal drains must have adequate slope to evacuate wastewater and solids.

MATCHING Match the following terms: -Trade name for percolation test;a method to evaluate percolation conditions of soil.

____________________ is a drain for allowable fixtures being utilized as a vent for other fixtures.

MATCHING Match the following terms: -Abbreviated as dfu;a determining factor based on rate of flow measured in gallons per minute or liters per second into a drainage system from a plumbing fixture;used to size pipe.

The building drain is sized based on the drainage load of the entire system,and minimum sizing is dictated by codes.

MATCHING Match the following terms: -Fabricated holding tank or structure to contain sewage and solids.

Plumbers Toolbox

Power Tools

Types of Pipe

Fittings

Valves and Devices

Fixtures

Faucets and Drain Assemblies

Plumbing Equipment and Appliances

Blueprint Reading and Drafting

Material Organization and Layout

Water Service Installation

Water Distribution Installation

Drainage,waste,and Vent Installation

Fixture and Equipment Installation

Plumbing Repairs and Troubleshooting

Hydronic Heat

Filters

All relief vents are sized based on their specific use and determined by using a codebook,but cannot be less than the diameter of the drain they serve,and no smaller than ".