Question 1

What are the three flow positions of a drainage system?

Accepted Answer

The three flow positions of a

Question 2

Most codes dictate that the stack vent cannot transition horizontally until it is 8" above the flood level rim of the highest fixture connecting to the waste stack.

Accepted Answer

A) True 
 B)False

Question 3

MATCHING
Match the following terms:
-Vent serving two fixture drains located on the same floor and either connecting at the same height or at different heights to the drain.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 4

Layout for a DWV system is typically the first process completed on a project,and other piping systems are installed around the DWV system.

Accepted Answer

A) True 
 B)False

Question 5

Cleanouts are required based on changes in direction,distance,and at the base of a waste stack.

Accepted Answer

A) True 
 B)False

Question 6

The _______________ is the main vertical drain pipe that begins with its connection to the building drain and terminates with its connection to the stack vent.

Accepted Answer

The answer of The _______________ is the main vertical drain...

Question 7

Most codes allow a 2" fixture drain to be served by a 1-1/2" removable slip joint.

Accepted Answer

A) True 
 B)False

Question 8

Many codes state a building drain must extend at least __________ and a maximum of __________ from the exterior of the building.

Accepted Answer

The answer of Many codes state a building drain must...

Question 9

MATCHING
Match the following terms:
-Vertical pipe that connects to a soil or waste stack and extends to open air or connects with another approved vent;can be installed with horizontal offsets.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

Question 10

MATCHING
Match the following terms:
-Wastewater that has been separated from solids,but may contain dissolved sewage solids.

Accepted Answer

A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent 
A) Loop Vent 
B) Stack Vent 
C) Septic tank 
D) Trap Distance 
E) Soil Stack
F)Common Vent
G)Drainage Fixture Unit
H)Perc test
I)Effluent
J)Stack
K)Relief Vent

What are the three flow positions of a drainage system?

Most codes dictate that the stack vent cannot transition horizontally until it is 8" above the flood level rim of the highest fixture connecting to the waste stack.

MATCHING Match the following terms: -Vent serving two fixture drains located on the same floor and either connecting at the same height or at different heights to the drain.

Layout for a DWV system is typically the first process completed on a project,and other piping systems are installed around the DWV system.

Cleanouts are required based on changes in direction,distance,and at the base of a waste stack.

The _______________ is the main vertical drain pipe that begins with its connection to the building drain and terminates with its connection to the stack vent.

Most codes allow a 2" fixture drain to be served by a 1-1/2" removable slip joint.

Many codes state a building drain must extend at least and a maximum of from the exterior of the building.

MATCHING Match the following terms: -Vertical pipe that connects to a soil or waste stack and extends to open air or connects with another approved vent;can be installed with horizontal offsets.

MATCHING Match the following terms: -Wastewater that has been separated from solids,but may contain dissolved sewage solids.

Plumbers Toolbox

Power Tools

Types of Pipe

Fittings

Valves and Devices

Fixtures

Faucets and Drain Assemblies

Plumbing Equipment and Appliances

Blueprint Reading and Drafting

Material Organization and Layout

Water Service Installation

Water Distribution Installation

Drainage,waste,and Vent Installation

Fixture and Equipment Installation

Plumbing Repairs and Troubleshooting

Hydronic Heat

Filters

Exam 13: Drainage,waste,and Vent Segments and Sizing

What are the three flow positions of a drainage system?

Most codes dictate that the stack vent cannot transition horizontally until it is 8" above the flood level rim of the highest fixture connecting to the waste stack.

MATCHING Match the following terms: -Vent serving two fixture drains located on the same floor and either connecting at the same height or at different heights to the drain.

Layout for a DWV system is typically the first process completed on a project,and other piping systems are installed around the DWV system.

Cleanouts are required based on changes in direction,distance,and at the base of a waste stack.

The _______________ is the main vertical drain pipe that begins with its connection to the building drain and terminates with its connection to the stack vent.

Most codes allow a 2" fixture drain to be served by a 1-1/2" removable slip joint.

Many codes state a building drain must extend at least __________ and a maximum of __________ from the exterior of the building.

MATCHING Match the following terms: -Vertical pipe that connects to a soil or waste stack and extends to open air or connects with another approved vent;can be installed with horizontal offsets.

MATCHING Match the following terms: -Wastewater that has been separated from solids,but may contain dissolved sewage solids.

Plumbers Toolbox

Power Tools

Types of Pipe

Fittings

Valves and Devices

Fixtures

Faucets and Drain Assemblies

Plumbing Equipment and Appliances

Blueprint Reading and Drafting

Material Organization and Layout

Water Service Installation

Water Distribution Installation

Drainage,waste,and Vent Installation

Fixture and Equipment Installation

Plumbing Repairs and Troubleshooting

Hydronic Heat

Filters

Many codes state a building drain must extend at least and a maximum of from the exterior of the building.