Question 1

The first step of small project management is______.

Accepted Answer

The answer of The first step of small project management...

Question 2

Surveys of graduates show that most of the professionals in the electrical and computer	
 engineering and technology fields have the responsibility of_____.

Accepted Answer

The answer of Surveys of graduates show that most of...

Question 3

Which of the following would NOT be considered a definition of scope?

Accepted Answer

A)  What components are available for implementation? 
B)  What sources of power will be utilized? 
C)  What are the project design limits? 
D)  Will inferred technology work or will RF be needed? 
A)  What components are available for implementation? 
B)  What sources of power will be utilized? 
C)  What are the project design limits? 
D)  Will inferred technology work or will RF be needed?

Question 4

Without the benefit of 60 Hz line voltage input, 1 pulse per second clock frequency could be generated by:

Accepted Answer

A)  a 555 timer and Schmitt- trigger. 
B)  a crystal oscillator. 
C)  a Schmitt- trigger and MOD 60 counter. 
D)  Either A or B 
A)  a 555 timer and Schmitt- trigger. 
B)  a crystal oscillator. 
C)  a Schmitt- trigger and MOD 60 counter. 
D)  Either A or B

Question 5

The examination and representation of sequenced bits can be demonstrated with a_____ transition diagram.

Accepted Answer

The answer of The examination and representation of sequenced bits...

Question 6

Synthesis and testing of each piece of the project building blocks:

Accepted Answer

A)  is necessary at all system levels. 
B)  is unnecessary because most subsystems have already been built and tested. 
C)  would require too much time reproving known technology. 
D)  is necessary for important subsystems but can be avoided for small, easily developed subsystems. 
A)  is necessary at all system levels. 
B)  is unnecessary because most subsystems have already been built and tested. 
C)  would require too much time reproving known technology. 
D)  is necessary for important subsystems but can be avoided for small, easily developed subsystems.

Question 7

Transforming incoming frequencies to useable pulses is called frequency_____.

Accepted Answer

The answer of Transforming incoming frequencies to useable pulses is...

Question 8

Small project management techniques only apply to small projects and could not be used for projects on a large scale such as building a house.

Accepted Answer

A) True 
 B)False

Question 9

MOD 10 counters are:

Accepted Answer

A)  retentive counters. 
B)  BCD counters. 
C)  decade counters. 
D)  Both A and B 
A)  retentive counters. 
B)  BCD counters. 
C)  decade counters. 
D)  Both A and B

Question 10

A 60 Hz line voltage is supplying a MOD 60 counter through a Schmitt trigger. The clock frequency:

Accepted Answer

A)  would still be dependent on line frequency. 
B)  is generated by an oscillator powered from the line frequency. 
C)  would be conditioned and independent from line frequency. 
D)  Both B and C 
A)  would still be dependent on line frequency. 
B)  is generated by an oscillator powered from the line frequency. 
C)  would be conditioned and independent from line frequency. 
D)  Both B and C

Question 11

Sine wave clock pulses are not appropriate for most clock inputs because:

Accepted Answer

A)  the negative going portion of the waveform would reverse bias input circuitry and cause circuit failure. 
B)  the negative going waveform would introduce unwanted noise. 
C)  sine waves have no defined on/off values. 
D)  off would not be at ground potential. It would have a negative potential. 
E)  C or D 
A)  the negative going portion of the waveform would reverse bias input circuitry and cause circuit failure. 
B)  the negative going waveform would introduce unwanted noise. 
C)  sine waves have no defined on/off values. 
D)  off would not be at ground potential. It would have a negative potential. 
E)  C or D

Question 12

A _____ counter is used to count the tens of minutes section of a digital clock.

Accepted Answer

The answer of A _____ counter is used to count...

Question 13

A _____counter divides a 60 Hz signal into 1 Hz.

Accepted Answer

The answer of A _____counter divides a 60 Hz signal...

Question 14

Counting the number of cycles of an incoming waveform during a precisely specified period of time is called the_____interval.

Accepted Answer

The answer of Counting the number of cycles of an...

Question 15

"Synchronously cascaded" refers to:

Accepted Answer

A)  multiple output or inputs processed by the same clock pulse. 
B)  development of a signal through repeated division of original signal. 
C)  any clock signal. 
D)  a process in which 60 Hz clock signals are produced. 
A)  multiple output or inputs processed by the same clock pulse. 
B)  development of a signal through repeated division of original signal. 
C)  any clock signal. 
D)  a process in which 60 Hz clock signals are produced.

Question 16

The counter for the tens of seconds in the microwave oven project is a _____counter.

Accepted Answer

The answer of The counter for the tens of seconds...

Question 17

In general, digital clock hours and minutes can be adjusted by:

Accepted Answer

A)  using thumbwheel style BCD preloading. 
B)  using a second, high speed clock pulse and enabling it only during time set mode. 
C)  designing a clock set circuit to preload counter. 
D)  routing the seconds counter to the hours and minutes clock as needed. 
A)  using thumbwheel style BCD preloading. 
B)  using a second, high speed clock pulse and enabling it only during time set mode. 
C)  designing a clock set circuit to preload counter. 
D)  routing the seconds counter to the hours and minutes clock as needed.

The first step of small project management is______.

Surveys of graduates show that most of the professionals in the electrical and computer engineering and technology fields have the responsibility of_____.

Which of the following would NOT be considered a definition of scope?

Without the benefit of 60 Hz line voltage input, 1 pulse per second clock frequency could be generated by:

The examination and representation of sequenced bits can be demonstrated with a_____ transition diagram.

Synthesis and testing of each piece of the project building blocks:

Transforming incoming frequencies to useable pulses is called frequency_____.

Small project management techniques only apply to small projects and could not be used for projects on a large scale such as building a house.

MOD 10 counters are:

A 60 Hz line voltage is supplying a MOD 60 counter through a Schmitt trigger. The clock frequency:

Sine wave clock pulses are not appropriate for most clock inputs because:

A _____ counter is used to count the tens of minutes section of a digital clock.

A _____counter divides a 60 Hz signal into 1 Hz.

Counting the number of cycles of an incoming waveform during a precisely specified period of time is called the_____interval.

"Synchronously cascaded" refers to:

The counter for the tens of seconds in the microwave oven project is a _____counter.

In general, digital clock hours and minutes can be adjusted by:

Introductory Concepts

Number Systems and Codes

Describing Logic Circuits

Combinational Logic Circuits

Flip-Flops and Related Devices

Digital Arithmetic: Operations and Circuits

Counters and Registers

Integrated-Circuit Logic Families

MSI Logic Circuits

Interfacing With the Analog World

Memory Devices

Programmable Logic Device Architectures

Filters

Exam 10: Digital System Projects Using HDL

The first step of small project management is______.

Surveys of graduates show that most of the professionals in the electrical and computer engineering and technology fields have the responsibility of_____.

Which of the following would NOT be considered a definition of scope?

Without the benefit of 60 Hz line voltage input, 1 pulse per second clock frequency could be generated by:

The examination and representation of sequenced bits can be demonstrated with a_____ transition diagram.

Synthesis and testing of each piece of the project building blocks:

Transforming incoming frequencies to useable pulses is called frequency_____.

Small project management techniques only apply to small projects and could not be used for projects on a large scale such as building a house.

MOD 10 counters are:

A 60 Hz line voltage is supplying a MOD 60 counter through a Schmitt trigger. The clock frequency:

Sine wave clock pulses are not appropriate for most clock inputs because:

A _____ counter is used to count the tens of minutes section of a digital clock.

A _____counter divides a 60 Hz signal into 1 Hz.

Counting the number of cycles of an incoming waveform during a precisely specified period of time is called the_____interval.

"Synchronously cascaded" refers to:

The counter for the tens of seconds in the microwave oven project is a _____counter.

In general, digital clock hours and minutes can be adjusted by:

Introductory Concepts

Number Systems and Codes

Describing Logic Circuits

Combinational Logic Circuits

Flip-Flops and Related Devices

Digital Arithmetic: Operations and Circuits

Counters and Registers

Integrated-Circuit Logic Families

MSI Logic Circuits

Interfacing With the Analog World

Memory Devices

Programmable Logic Device Architectures

Filters