Question 1

Some non-isometric lines can be true length lines.

Accepted Answer

A) True 
 B)False

Question 2

There are a number of uses and advantages for freehand sketching. List six of these uses and advantages as discussed in the text.

Accepted Answer

Any six of the following:
Sketching is a

Question 3

MATCHING
Match the following word or phrase with its correct meaning.
-Lines that are parallel the one of the three isometric axes lines.

Accepted Answer

A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection 
A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection

Question 4

When making a three dimensional isometric view of an object, the most critical part of the construction is making sure the surrounding rectangular box has the proper proportions.

Accepted Answer

A) True 
 B)False

Question 5

An ellipse uses a consistent radius to be created.

Accepted Answer

A) True 
 B)False

Question 6

In setting up an isometric view, you need four beginning lines: a horizontal reference line, two ____________________ lines and one vertical line.

Accepted Answer

The answer of In setting up an isometric view, you...

Question 7

The pencil you use for sketching should have a hard lead that is sharp.

Accepted Answer

A) True 
 B)False

Question 8

MATCHING
Match the following word or phrase with its correct meaning.
-The first line sketched that determines the scale of the drawing.

Accepted Answer

A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection 
A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection

Question 9

Major and minor diameters represent the width and length of an ellipse.

Accepted Answer

A) True 
 B)False

Question 10

The centerline method for sketching a circle is different from the box method.

Accepted Answer

A) True 
 B)False

Question 11

The four center method of sketching an isometric ellipse includes:

Accepted Answer

A)  drawing construction line segments on the surface of the isometric cube. 
B)  sketching the non-isometric lines. 
C)  locating non-isometric line end points. 
D)  all of the above 
E)  none of the above 
A)  drawing construction line segments on the surface of the isometric cube. 
B)  sketching the non-isometric lines. 
C)  locating non-isometric line end points. 
D)  all of the above 
E)  none of the above

Question 12

MATCHING
Match the following word or phrase with its correct meaning.
-A freehand drawing or a drawing made without the use of drafting equipment.

Accepted Answer

A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection 
A) sketching 
B) isometric line 
C) Non-isometric line 
D) mitre line 
E) measurement line
F)proportion
G)multiview projection
H)orthographic projection

Question 13

To set up an isometric axis, you need three beginning lines.

Accepted Answer

A) True 
 B)False

Question 14

In an isometric sketch, an isometric cube shows four sides.

Accepted Answer

A) True 
 B)False

Question 15

When sketching, it is never necessary to have an eraser available.

Accepted Answer

A) True 
 B)False

Question 16

An automatic pencil is a poor choice to use when sketching.

Accepted Answer

A) True 
 B)False

Question 17

A small circle is easy to sketch when you sketch it like a letter "O."

Accepted Answer

A) True 
 B)False

Question 18

Circles and arcs appear as ____________________ in isometric views.

Accepted Answer

The answer of Circles and arcs appear as ____________________ in...

Question 19

It is important to sketch features of an object lightly by estimating distances within the rectangular box, which has already been drawn.

Accepted Answer

A) True 
 B)False

Question 20

Orthographic projection is also called "proportional projection."

Accepted Answer

A) True 
 B)False

Some non-isometric lines can be true length lines.

There are a number of uses and advantages for freehand sketching. List six of these uses and advantages as discussed in the text.

MATCHING Match the following word or phrase with its correct meaning. -Lines that are parallel the one of the three isometric axes lines.

When making a three dimensional isometric view of an object, the most critical part of the construction is making sure the surrounding rectangular box has the proper proportions.

An ellipse uses a consistent radius to be created.

In setting up an isometric view, you need four beginning lines: a horizontal reference line, two ____________________ lines and one vertical line.

The pencil you use for sketching should have a hard lead that is sharp.

MATCHING Match the following word or phrase with its correct meaning. -The first line sketched that determines the scale of the drawing.

Major and minor diameters represent the width and length of an ellipse.

The centerline method for sketching a circle is different from the box method.

The four center method of sketching an isometric ellipse includes:

MATCHING Match the following word or phrase with its correct meaning. -A freehand drawing or a drawing made without the use of drafting equipment.

To set up an isometric axis, you need three beginning lines.

In an isometric sketch, an isometric cube shows four sides.

When sketching, it is never necessary to have an eraser available.

An automatic pencil is a poor choice to use when sketching.

A small circle is easy to sketch when you sketch it like a letter "O."

Circles and arcs appear as ____________________ in isometric views.

It is important to sketch features of an object lightly by estimating distances within the rectangular box, which has already been drawn.

Orthographic projection is also called "proportional projection."

Introduction to Engineering and Manufacturing Technology Print Reading

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 2: Communicating with a Sketch

Some non-isometric lines can be true length lines.

There are a number of uses and advantages for freehand sketching. List six of these uses and advantages as discussed in the text.

MATCHING Match the following word or phrase with its correct meaning. -Lines that are parallel the one of the three isometric axes lines.

When making a three dimensional isometric view of an object, the most critical part of the construction is making sure the surrounding rectangular box has the proper proportions.

An ellipse uses a consistent radius to be created.

In setting up an isometric view, you need four beginning lines: a horizontal reference line, two ____________________ lines and one vertical line.

The pencil you use for sketching should have a hard lead that is sharp.

MATCHING Match the following word or phrase with its correct meaning. -The first line sketched that determines the scale of the drawing.

Major and minor diameters represent the width and length of an ellipse.

The centerline method for sketching a circle is different from the box method.

The four center method of sketching an isometric ellipse includes:

MATCHING Match the following word or phrase with its correct meaning. -A freehand drawing or a drawing made without the use of drafting equipment.

To set up an isometric axis, you need three beginning lines.

In an isometric sketch, an isometric cube shows four sides.

When sketching, it is never necessary to have an eraser available.

An automatic pencil is a poor choice to use when sketching.

A small circle is easy to sketch when you sketch it like a letter "O."

Circles and arcs appear as ____________________ in isometric views.

It is important to sketch features of an object lightly by estimating distances within the rectangular box, which has already been drawn.

Orthographic projection is also called "proportional projection."

Introduction to Engineering and Manufacturing Technology Print Reading

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters